doc: Quote all list values.
* doc/guix.texi (System Configuration)[Services]: Replace all () by '(), and similar quotings. (Home Configuration)[Home Services]: Likewise.master
Florian Pelz
parent
5a8bb79c1c
commit
718eb55104
264
doc/guix.texi
264
doc/guix.texi
|
|
@ -19611,7 +19611,7 @@ Available @code{mcron-configuration} fields are:
|
|||
@item @code{mcron} (default: @code{mcron}) (type: file-like)
|
||||
The mcron package to use.
|
||||
|
||||
@item @code{jobs} (default: @code{()}) (type: list-of-gexps)
|
||||
@item @code{jobs} (default: @code{'()}) (type: list-of-gexps)
|
||||
This is a list of gexps (@pxref{G-Expressions}), where each gexp
|
||||
corresponds to an mcron job specification (@pxref{Syntax, mcron job
|
||||
specifications,, mcron,GNU@tie{}mcron}).
|
||||
|
|
@ -21030,7 +21030,7 @@ Whether to detach from the controlling terminal.
|
|||
File containing the @dfn{host key}. This file must be readable by
|
||||
root only.
|
||||
|
||||
@item @code{interfaces} (default: @code{()}) (type: list)
|
||||
@item @code{interfaces} (default: @code{'()}) (type: list)
|
||||
List of host names or addresses that @command{lshd} will listen on.
|
||||
If empty, @command{lshd} listens for connections on all the network
|
||||
interfaces.
|
||||
|
|
@ -22328,7 +22328,7 @@ When unspecified, listen for any hosts/IP addresses.
|
|||
@item @code{vnc-server-port} (default: @code{5900}) (type: number)
|
||||
The TCP port the VNC server should listen to.
|
||||
|
||||
@item @code{extra-config} (default: @code{()}) (type: list-of-strings)
|
||||
@item @code{extra-config} (default: @code{'()}) (type: list-of-strings)
|
||||
Extra configuration values to append to the LightDM configuration file.
|
||||
|
||||
@end table
|
||||
|
|
@ -22377,7 +22377,7 @@ The accessibility features to enable, given as list of symbols.
|
|||
@item @code{reader} (type: maybe-file-like)
|
||||
The command to use to launch a screen reader.
|
||||
|
||||
@item @code{extra-config} (default: @code{()}) (type: list-of-strings)
|
||||
@item @code{extra-config} (default: @code{'()}) (type: list-of-strings)
|
||||
Extra configuration values to append to the LightDM GTK Greeter
|
||||
configuration file.
|
||||
|
||||
|
|
@ -22415,7 +22415,7 @@ The Xorg server command to run.
|
|||
@item @code{session-wrapper} (type: file-like)
|
||||
The xinitrc session wrapper to use.
|
||||
|
||||
@item @code{extra-config} (default: @code{()}) (type: list-of-strings)
|
||||
@item @code{extra-config} (default: @code{'()}) (type: list-of-strings)
|
||||
Extra configuration values to append to the seat configuration section.
|
||||
|
||||
@end table
|
||||
|
|
@ -22442,11 +22442,11 @@ This is a list of font directories to add to the server's @dfn{font path}.
|
|||
@item @code{drivers} (default: @code{'()})
|
||||
This must be either the empty list, in which case Xorg chooses a graphics
|
||||
driver automatically, or a list of driver names that will be tried in this
|
||||
order---e.g., @code{("modesetting" "vesa")}.
|
||||
order---e.g., @code{'("modesetting" "vesa")}.
|
||||
|
||||
@item @code{resolutions} (default: @code{'()})
|
||||
When @code{resolutions} is the empty list, Xorg chooses an appropriate screen
|
||||
resolution. Otherwise, it must be a list of resolutions---e.g., @code{((1024
|
||||
resolution. Otherwise, it must be a list of resolutions---e.g., @code{'((1024
|
||||
768) (640 480))}.
|
||||
|
||||
@cindex keyboard layout, for Xorg
|
||||
|
|
@ -22974,13 +22974,13 @@ Specifies the URI path to which the access control applies.
|
|||
Access controls for all access to this path, in the same format as the
|
||||
@code{access-controls} of @code{operation-access-control}.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{location-access-controls} parameter} method-access-control-list method-access-controls
|
||||
Access controls for method-specific access to this path.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
Available @code{method-access-controls} fields are:
|
||||
|
||||
|
|
@ -22994,14 +22994,14 @@ Defaults to @samp{#f}.
|
|||
@deftypevr {@code{method-access-controls} parameter} method-list methods
|
||||
Methods to which this access control applies.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{method-access-controls} parameter} access-control-list access-controls
|
||||
Access control directives, as a list of strings. Each string should be
|
||||
one directive, such as @samp{"Order allow,deny"}.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
@end deftypevr
|
||||
@end deftypevr
|
||||
|
|
@ -23134,7 +23134,7 @@ Defaults to @samp{900}.
|
|||
Passes the specified environment variable(s) to child processes; a list
|
||||
of strings.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{cups-configuration} parameter} policy-configuration-list policies
|
||||
|
|
@ -23193,7 +23193,7 @@ notify-subscriber-user-name notify-user-data"}.
|
|||
@deftypevr {@code{policy-configuration} parameter} operation-access-control-list access-controls
|
||||
Access control by IPP operation.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -23275,7 +23275,7 @@ values are of the form @var{address}:@var{port}, where @var{address} is
|
|||
either an IPv6 address enclosed in brackets, an IPv4 address, or
|
||||
@code{*} to indicate all addresses.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{cups-configuration} parameter} ssl-options ssl-options
|
||||
|
|
@ -23289,7 +23289,7 @@ TLS v1.0. The @code{DenyCBC} option disables all CBC cipher suites. The
|
|||
@code{DenyTLS1.0} option disables TLS v1.0 support - this sets the minimum
|
||||
protocol version to TLS v1.1.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{cups-configuration} parameter} boolean strict-conformance?
|
||||
|
|
@ -23586,7 +23586,7 @@ Data type representing the configuration for @code{dbus-root-service-type}.
|
|||
@item @code{dbus} (default: @code{dbus}) (type: file-like)
|
||||
Package object for dbus.
|
||||
|
||||
@item @code{services} (default: @code{()}) (type: list)
|
||||
@item @code{services} (default: @code{'()}) (type: list)
|
||||
List of packages that provide an @file{etc/dbus-1/system.d} directory
|
||||
containing additional D-Bus configuration and policy files.
|
||||
For example, to allow avahi-daemon to use the system bus, @var{services}
|
||||
|
|
@ -25078,7 +25078,7 @@ the ManageSieve service, before authentication. These may differ from the
|
|||
capabilities offered to authenticated users. If this field is left empty,
|
||||
report what the Sieve interpreter supports by default.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{protocol-configuration} parameter} space-separated-string-list managesieve-sieve-capability
|
||||
|
|
@ -25087,7 +25087,7 @@ the ManageSieve service, before authentication. These may differ from the
|
|||
capabilities offered to authenticated users. If this field is left empty,
|
||||
report what the Sieve interpreter supports by default.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -25121,7 +25121,7 @@ The service kind. Valid values include @code{director},
|
|||
Listeners for the service. A listener is either a
|
||||
@code{unix-listener-configuration}, a @code{fifo-listener-configuration}, or
|
||||
an @code{inet-listener-configuration}.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
Available @code{unix-listener-configuration} fields are:
|
||||
|
||||
|
|
@ -25239,7 +25239,7 @@ Available @code{dict-configuration} fields are:
|
|||
|
||||
@deftypevr {@code{dict-configuration} parameter} free-form-fields entries
|
||||
A list of key-value pairs that this dict should hold.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@end deftypevr
|
||||
|
|
@ -25283,7 +25283,7 @@ Defaults to @samp{""}.
|
|||
|
||||
@deftypevr {@code{userdb-configuration} parameter} free-form-args override-fields
|
||||
Override fields from passwd.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@end deftypevr
|
||||
|
|
@ -25361,7 +25361,7 @@ Defaults to @samp{#t}.
|
|||
|
||||
@deftypevr {@code{namespace-configuration} parameter} mailbox-configuration-list mailboxes
|
||||
List of predefined mailboxes in this namespace.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
Available @code{mailbox-configuration} fields are:
|
||||
|
||||
|
|
@ -25379,7 +25379,7 @@ Defaults to @samp{"no"}.
|
|||
List of IMAP @code{SPECIAL-USE} attributes as specified by RFC 6154.
|
||||
Valid values are @code{\All}, @code{\Archive}, @code{\Drafts},
|
||||
@code{\Flagged}, @code{\Junk}, @code{\Sent}, and @code{\Trash}.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@end deftypevr
|
||||
|
|
@ -25402,12 +25402,12 @@ allowed to override their IP addresses and ports (for logging and for
|
|||
authentication checks). @samp{disable-plaintext-auth} is also ignored
|
||||
for these networks. Typically you would specify your IMAP proxy servers
|
||||
here.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{dovecot-configuration} parameter} space-separated-string-list login-access-sockets
|
||||
List of login access check sockets (e.g.@: tcpwrap).
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{dovecot-configuration} parameter} boolean verbose-proctitle?
|
||||
|
|
@ -25480,7 +25480,7 @@ List of realms for SASL authentication mechanisms that need them.
|
|||
You can leave it empty if you don't want to support multiple realms.
|
||||
Many clients simply use the first one listed here, so keep the default
|
||||
realm first.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{dovecot-configuration} parameter} string auth-default-realm
|
||||
|
|
@ -25596,13 +25596,13 @@ List of wanted authentication mechanisms. Supported mechanisms are:
|
|||
List of IPs or hostnames to all director servers, including ourself.
|
||||
Ports can be specified as ip:port. The default port is the same as what
|
||||
director service's @samp{inet-listener} is using.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{dovecot-configuration} parameter} space-separated-string-list director-mail-servers
|
||||
List of IPs or hostnames to all backend mail servers. Ranges are
|
||||
allowed too, like 10.0.0.10-10.0.0.30.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{dovecot-configuration} parameter} string director-user-expire
|
||||
|
|
@ -25901,7 +25901,7 @@ too). This setting doesn't affect @samp{login-chroot}
|
|||
which local users can modify, that may lead to root exploit. Usually
|
||||
this should be done only if you don't allow shell access for users.
|
||||
<doc/wiki/Chrooting.txt>.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{dovecot-configuration} parameter} string mail-chroot
|
||||
|
|
@ -25929,7 +25929,7 @@ Defaults to @samp{"/usr/lib/dovecot"}.
|
|||
@deftypevr {@code{dovecot-configuration} parameter} space-separated-string-list mail-plugins
|
||||
List of plugins to load for all services. Plugins specific to IMAP,
|
||||
LDA, etc.@: are added to this list in their own .conf files.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{dovecot-configuration} parameter} non-negative-integer mail-cache-min-mail-count
|
||||
|
|
@ -26357,7 +26357,7 @@ Show \Noselect flags for LSUB replies with LAYOUT=fs (e.g.@: mbox).
|
|||
This makes Thunderbird realize they aren't selectable and show them
|
||||
greyed out, instead of only later giving "not selectable" popup error.
|
||||
@end table
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{dovecot-configuration} parameter} string imap-urlauth-host
|
||||
|
|
@ -26570,7 +26570,7 @@ Defaults to @samp{""}.
|
|||
@deftypevr {@code{getmail-retriever-configuration} parameter} list password-command
|
||||
Override fields from passwd.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -26598,7 +26598,7 @@ Defaults to @samp{""}.
|
|||
@deftypevr {@code{getmail-retriever-configuration} parameter} parameter-alist extra-parameters
|
||||
Extra retriever parameters.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -26628,7 +26628,7 @@ Defaults to @samp{""}.
|
|||
@deftypevr {@code{getmail-destination-configuration} parameter} parameter-alist extra-parameters
|
||||
Extra destination parameters
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -26743,7 +26743,7 @@ Defaults to @samp{#f}.
|
|||
@deftypevr {@code{getmail-options-configuration} parameter} parameter-alist extra-parameters
|
||||
Extra options to include.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -26756,14 +26756,14 @@ A list of mailboxes that getmail should wait on the server for new mail
|
|||
notifications. This depends on the server supporting the IDLE
|
||||
extension.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{getmail-configuration} parameter} list environment-variables
|
||||
Environment variables to set for getmail.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -26937,7 +26937,7 @@ Defaults to @samp{"/var/lib/prosody"}.
|
|||
@deftypevr {@code{prosody-configuration} parameter} file-object-list plugin-paths
|
||||
Additional plugin directories. They are searched in all the specified
|
||||
paths in order. See @url{https://prosody.im/doc/plugins_directory}.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{prosody-configuration} parameter} file-name certificates
|
||||
|
|
@ -26952,7 +26952,7 @@ This is a list of accounts that are admins for the server. Note that you
|
|||
must create the accounts separately. See @url{https://prosody.im/doc/admins} and
|
||||
@url{https://prosody.im/doc/creating_accounts}.
|
||||
Example: @code{(admins '("user1@@example.com" "user2@@example.net"))}
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{prosody-configuration} parameter} boolean use-libevent?
|
||||
|
|
@ -26966,13 +26966,13 @@ This is the list of modules Prosody will load on startup. It looks for
|
|||
@code{mod_modulename.lua} in the plugins folder, so make sure that exists too.
|
||||
Documentation on modules can be found at:
|
||||
@url{https://prosody.im/doc/modules}.
|
||||
Defaults to @samp{("roster" "saslauth" "tls" "dialback" "disco" "carbons" "private" "blocklist" "vcard" "version" "uptime" "time" "ping" "pep" "register" "admin_adhoc")}.
|
||||
Defaults to @samp{'("roster" "saslauth" "tls" "dialback" "disco" "carbons" "private" "blocklist" "vcard" "version" "uptime" "time" "ping" "pep" "register" "admin_adhoc")}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{prosody-configuration} parameter} string-list modules-disabled
|
||||
@samp{"offline"}, @samp{"c2s"} and @samp{"s2s"} are auto-loaded, but
|
||||
should you want to disable them then add them to this list.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{prosody-configuration} parameter} file-object groups-file
|
||||
|
|
@ -27070,7 +27070,7 @@ Defaults to @samp{#f}.
|
|||
@deftypevr {@code{prosody-configuration} parameter} string-list disable-sasl-mechanisms
|
||||
Set of mechanisms that will never be offered. See
|
||||
@url{https://prosody.im/doc/modules/mod_saslauth}.
|
||||
Defaults to @samp{("DIGEST-MD5")}.
|
||||
Defaults to @samp{'("DIGEST-MD5")}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{prosody-configuration} parameter} boolean s2s-require-encryption?
|
||||
|
|
@ -27092,14 +27092,14 @@ Many servers don't support encryption or have invalid or self-signed
|
|||
certificates. You can list domains here that will not be required to
|
||||
authenticate using certificates. They will be authenticated using DNS@. See
|
||||
@url{https://prosody.im/doc/s2s#security}.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{prosody-configuration} parameter} string-list s2s-secure-domains
|
||||
Even if you leave @code{s2s-secure-auth?} disabled, you can still require
|
||||
valid certificates for some domains by specifying a list here. See
|
||||
@url{https://prosody.im/doc/s2s#security}.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{prosody-configuration} parameter} string authentication
|
||||
|
|
@ -27170,7 +27170,7 @@ internal component, you simply fill the hostname field, and the plugin you wish
|
|||
to use for the component.
|
||||
|
||||
See @url{https://prosody.im/doc/components}.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
Available @code{int-component-configuration} fields are:
|
||||
|
||||
|
|
@ -27223,7 +27223,7 @@ Defaults to @samp{20}.
|
|||
External components use XEP-0114, which most standalone components
|
||||
support. To add an external component, you simply fill the hostname field. See
|
||||
@url{https://prosody.im/doc/components}.
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
Available @code{ext-component-configuration} fields are:
|
||||
|
||||
|
|
@ -27240,7 +27240,7 @@ Hostname of the component.
|
|||
|
||||
@deftypevr {@code{prosody-configuration} parameter} non-negative-integer-list component-ports
|
||||
Port(s) Prosody listens on for component connections.
|
||||
Defaults to @samp{(5347)}.
|
||||
Defaults to @samp{'(5347)}.
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{prosody-configuration} parameter} string component-interface
|
||||
|
|
@ -28505,7 +28505,7 @@ The list of IP and IPv6 addresses from which @acronym{RPC} requests will
|
|||
be accepted when @code{rpc-whitelist-enabled?} is @code{#t}. Wildcards
|
||||
may be specified using @samp{*}.
|
||||
|
||||
Defaults to @samp{("127.0.0.1" "::1")}.
|
||||
Defaults to @samp{'("127.0.0.1" "::1")}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -28526,7 +28526,7 @@ Defaults to @samp{#t}.
|
|||
The list of host names recognized by the @acronym{RPC} server when
|
||||
@code{rpc-host-whitelist-enabled?} is @code{#t}.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -29104,7 +29104,7 @@ Location of SSL client certificates.
|
|||
@item @code{extra-options} (default: @code{""}) (type: extra-options)
|
||||
Extra options will be appended to Zabbix server configuration file.
|
||||
|
||||
@item @code{include-files} (default: @code{()}) (type: include-files)
|
||||
@item @code{include-files} (default: @code{'()}) (type: include-files)
|
||||
You may include individual files or all files in a directory in the
|
||||
configuration file.
|
||||
|
||||
|
|
@ -29169,12 +29169,12 @@ Log file name for @code{log-type} @code{file} parameter.
|
|||
@item @code{pid-file} (default: @code{"/var/run/zabbix/zabbix_agent.pid"}) (type: string)
|
||||
Name of PID file.
|
||||
|
||||
@item @code{server} (default: @code{("127.0.0.1")}) (type: list)
|
||||
@item @code{server} (default: @code{'("127.0.0.1")}) (type: list)
|
||||
List of IP addresses, optionally in CIDR notation, or hostnames of
|
||||
Zabbix servers and Zabbix proxies. Incoming connections will be
|
||||
accepted only from the hosts listed here.
|
||||
|
||||
@item @code{server-active} (default: @code{("127.0.0.1")}) (type: list)
|
||||
@item @code{server-active} (default: @code{'("127.0.0.1")}) (type: list)
|
||||
List of IP:port (or hostname:port) pairs of Zabbix servers and Zabbix
|
||||
proxies for active checks. If port is not specified, default port is
|
||||
used. If this parameter is not specified, active checks are disabled.
|
||||
|
|
@ -29182,7 +29182,7 @@ used. If this parameter is not specified, active checks are disabled.
|
|||
@item @code{extra-options} (default: @code{""}) (type: extra-options)
|
||||
Extra options will be appended to Zabbix server configuration file.
|
||||
|
||||
@item @code{include-files} (default: @code{()}) (type: include-files)
|
||||
@item @code{include-files} (default: @code{'()}) (type: include-files)
|
||||
You may include individual files or all files in a directory in the
|
||||
configuration file.
|
||||
|
||||
|
|
@ -29216,7 +29216,7 @@ Available @code{zabbix-front-end-configuration} fields are:
|
|||
@item @code{zabbix-server} (default: @code{zabbix-server}) (type: file-like)
|
||||
The Zabbix server package to use.
|
||||
|
||||
@item @code{nginx} (default: @code{()}) (type: list)
|
||||
@item @code{nginx} (default: @code{'()}) (type: list)
|
||||
List of @ref{nginx-server-configuration,@code{nginx-server-configuration}}
|
||||
blocks for the Zabbix front-end. When empty, a default that listens on
|
||||
port 80 is used.
|
||||
|
|
@ -29462,7 +29462,7 @@ one of the following symbols: @samp{crit}, @samp{error}, @samp{warning},
|
|||
@samp{notice}, @samp{info} or @samp{debug}. All messages with the
|
||||
specified log level or higher are logged.
|
||||
|
||||
Defaults to @samp{("/var/log/nslcd" info)}.
|
||||
Defaults to @samp{'("/var/log/nslcd" info)}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -29470,7 +29470,7 @@ Defaults to @samp{("/var/log/nslcd" info)}.
|
|||
The list of LDAP server URIs. Normally, only the first server will be
|
||||
used with the following servers as fall-back.
|
||||
|
||||
Defaults to @samp{("ldap://localhost:389/")}.
|
||||
Defaults to @samp{'("ldap://localhost:389/")}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -29575,7 +29575,7 @@ Specifies the search scope (subtree, onelevel, base or children). The
|
|||
default scope is subtree; base scope is almost never useful for name
|
||||
service lookups; children scope is not supported on all servers.
|
||||
|
||||
Defaults to @samp{(subtree)}.
|
||||
Defaults to @samp{'(subtree)}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -29601,7 +29601,7 @@ default RFC 2307 attributes. It is a list of maps, each consisting of
|
|||
the name of a map, the RFC 2307 attribute to match and the query
|
||||
expression for the attribute as it is available in the directory.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -29609,7 +29609,7 @@ Defaults to @samp{()}.
|
|||
A list of filters consisting of the name of a map to which the filter
|
||||
applies and an LDAP search filter expression.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -29854,7 +29854,7 @@ Defaults to @samp{disabled}.
|
|||
@deftypevr {@code{nslcd-configuration} parameter} list pam-services
|
||||
List of pam service names for which LDAP authentication should suffice.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -31350,7 +31350,7 @@ The certbot package to use.
|
|||
The directory from which to serve the Let's Encrypt challenge/response
|
||||
files.
|
||||
|
||||
@item @code{certificates} (default: @code{()})
|
||||
@item @code{certificates} (default: @code{'()})
|
||||
A list of @code{certificates-configuration}s for which to generate
|
||||
certificates and request signatures. Each certificate has a @code{name}
|
||||
and several @code{domains}.
|
||||
|
|
@ -31401,7 +31401,7 @@ certificate names, run @code{certbot certificates}.
|
|||
|
||||
Its default is the first provided domain.
|
||||
|
||||
@item @code{domains} (default: @code{()})
|
||||
@item @code{domains} (default: @code{'()})
|
||||
The first domain provided will be the subject CN of the certificate, and
|
||||
all domains will be Subject Alternative Names on the certificate.
|
||||
|
||||
|
|
@ -32203,7 +32203,7 @@ Defaults to @samp{"/etc/ddclient/secrets.conf"}.
|
|||
@deftypevr {@code{ddclient-configuration} parameter} list extra-options
|
||||
Extra options will be appended to @file{ddclient.conf} file.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -32339,7 +32339,7 @@ Use an Inetd-style service, which runs the Xvnc server on demand.
|
|||
@item @code{frame-rate} (default: @code{60}) (type: number)
|
||||
The maximum number of updates per second sent to each client.
|
||||
|
||||
@item @code{security-types} (default: @code{("None")}) (type: security-types)
|
||||
@item @code{security-types} (default: @code{'("None")}) (type: security-types)
|
||||
The allowed security schemes to use for incoming connections. The
|
||||
default is "None", which is safe given that Xvnc is configured to
|
||||
authenticate the user via the display manager, and only for local
|
||||
|
|
@ -32355,7 +32355,7 @@ used to expose the remote port.
|
|||
The log level, a number between 0 and 100, 100 meaning most verbose
|
||||
output. The log messages are output to syslog.
|
||||
|
||||
@item @code{extra-options} (default: @code{()}) (type: strings)
|
||||
@item @code{extra-options} (default: @code{'()}) (type: strings)
|
||||
This can be used to provide extra Xvnc options not exposed via this
|
||||
<xvnc-configuration> record.
|
||||
|
||||
|
|
@ -32467,7 +32467,7 @@ Bind to a specific local port number.
|
|||
@item @code{resolv-retry?} (default: @code{#t}) (type: resolv-retry)
|
||||
Retry resolving server address.
|
||||
|
||||
@item @code{remote} (default: @code{()}) (type: openvpn-remote-list)
|
||||
@item @code{remote} (default: @code{'()}) (type: openvpn-remote-list)
|
||||
A list of remote servers to connect to.
|
||||
|
||||
@deftp {Data Type} openvpn-remote-configuration
|
||||
|
|
@ -32576,7 +32576,7 @@ The maximum number of clients.
|
|||
The status file. This file shows a small report on current connection.
|
||||
It is truncated and rewritten every minute.
|
||||
|
||||
@item @code{client-config-dir} (default: @code{()}) (type: openvpn-ccd-list)
|
||||
@item @code{client-config-dir} (default: @code{'()}) (type: openvpn-ccd-list)
|
||||
The list of configuration for some clients.
|
||||
|
||||
@end table
|
||||
|
|
@ -33964,11 +33964,11 @@ who is a part of the group @var{group} (see below).
|
|||
The group to run mpd as.
|
||||
|
||||
The default @code{%mpd-group} is a system group with name ``mpd''.
|
||||
@item @code{shepherd-requirement} (default: @code{()}) (type: list-of-symbol)
|
||||
@item @code{shepherd-requirement} (default: @code{'()}) (type: list-of-symbol)
|
||||
A list of symbols naming Shepherd services that this service
|
||||
will depend on.
|
||||
|
||||
@item @code{environment-variables} (default: @code{("PULSE_CLIENTCONFIG=/etc/pulse/client.conf" "PULSE_CONFIG=/etc/pulse/daemon.conf")}) (type: list-of-strings)
|
||||
@item @code{environment-variables} (default: @code{'("PULSE_CLIENTCONFIG=/etc/pulse/client.conf" "PULSE_CONFIG=/etc/pulse/daemon.conf")}) (type: list-of-strings)
|
||||
A list of strings specifying environment variables.
|
||||
|
||||
@item @code{log-file} (default: @code{"/var/log/mpd/log"}) (type: maybe-string)
|
||||
|
|
@ -34009,38 +34009,38 @@ can be specified here.
|
|||
@item @code{database} (type: maybe-mpd-plugin)
|
||||
MPD database plugin configuration.
|
||||
|
||||
@item @code{partitions} (default: @code{()}) (type: list-of-mpd-partition)
|
||||
@item @code{partitions} (default: @code{'()}) (type: list-of-mpd-partition)
|
||||
List of MPD "partitions".
|
||||
|
||||
@item @code{neighbors} (default: @code{()}) (type: list-of-mpd-plugin)
|
||||
@item @code{neighbors} (default: @code{'()}) (type: list-of-mpd-plugin)
|
||||
List of MPD neighbor plugin configurations.
|
||||
|
||||
@item @code{inputs} (default: @code{()}) (type: list-of-mpd-plugin)
|
||||
@item @code{inputs} (default: @code{'()}) (type: list-of-mpd-plugin)
|
||||
List of MPD input plugin configurations.
|
||||
|
||||
@item @code{archive-plugins} (default: @code{()}) (type: list-of-mpd-plugin)
|
||||
@item @code{archive-plugins} (default: @code{'()}) (type: list-of-mpd-plugin)
|
||||
List of MPD archive plugin configurations.
|
||||
|
||||
@item @code{input-cache-size} (type: maybe-string)
|
||||
MPD input cache size.
|
||||
|
||||
@item @code{decoders} (default: @code{()}) (type: list-of-mpd-plugin)
|
||||
@item @code{decoders} (default: @code{'()}) (type: list-of-mpd-plugin)
|
||||
List of MPD decoder plugin configurations.
|
||||
|
||||
@item @code{resampler} (type: maybe-mpd-plugin)
|
||||
MPD resampler plugin configuration.
|
||||
|
||||
@item @code{filters} (default: @code{()}) (type: list-of-mpd-plugin)
|
||||
@item @code{filters} (default: @code{'()}) (type: list-of-mpd-plugin)
|
||||
List of MPD filter plugin configurations.
|
||||
|
||||
@item @code{outputs} (type: list-of-mpd-plugin-or-output)
|
||||
The audio outputs that MPD can use. By default this is a single output
|
||||
using pulseaudio.
|
||||
|
||||
@item @code{playlist-plugins} (default: @code{()}) (type: list-of-mpd-plugin)
|
||||
@item @code{playlist-plugins} (default: @code{'()}) (type: list-of-mpd-plugin)
|
||||
List of MPD playlist plugin configurations.
|
||||
|
||||
@item @code{extra-options} (default: @code{()}) (type: alist)
|
||||
@item @code{extra-options} (default: @code{'()}) (type: alist)
|
||||
An association list of option symbols/strings to string values to be
|
||||
appended to the configuration.
|
||||
|
||||
|
|
@ -34060,7 +34060,7 @@ Name.
|
|||
@item @code{enabled?} (type: maybe-boolean)
|
||||
Whether the plugin is enabled/disabled.
|
||||
|
||||
@item @code{extra-options} (default: @code{()}) (type: alist)
|
||||
@item @code{extra-options} (default: @code{'()}) (type: alist)
|
||||
An association list of option symbols/strings to string values to be
|
||||
appended to the plugin configuration. See
|
||||
@uref{https://mpd.readthedocs.io/en/latest/plugins.html,MPD plugin
|
||||
|
|
@ -34076,7 +34076,7 @@ Data type representing a @command{mpd} partition.
|
|||
@item @code{name} (type: string)
|
||||
Partition name.
|
||||
|
||||
@item @code{extra-options} (default: @code{()}) (type: alist)
|
||||
@item @code{extra-options} (default: @code{'()}) (type: alist)
|
||||
An association list of option symbols/strings to string values to be
|
||||
appended to the partition configuration. See
|
||||
@uref{https://mpd.readthedocs.io/en/latest/user.html#configuring-partitions,Configuring
|
||||
|
|
@ -34130,7 +34130,7 @@ Gain} is to be applied. @code{software} uses an internal software
|
|||
volume control, @code{mixer} uses the configured (hardware) mixer
|
||||
control and @code{none} disables replay gain on this audio output.
|
||||
|
||||
@item @code{extra-options} (default: @code{()}) (type: alist)
|
||||
@item @code{extra-options} (default: @code{'()}) (type: alist)
|
||||
An association list of option symbols/strings to string values to be
|
||||
appended to the audio output configuration.
|
||||
|
||||
|
|
@ -34195,7 +34195,7 @@ Available @code{mympd-configuration} fields are:
|
|||
@item @code{package} (default: @code{mympd}) (type: file-like)
|
||||
The package object of the myMPD server.
|
||||
|
||||
@item @code{shepherd-requirement} (default: @code{()}) (type: list-of-symbol)
|
||||
@item @code{shepherd-requirement} (default: @code{'()}) (type: list-of-symbol)
|
||||
This is a list of symbols naming Shepherd services that this service
|
||||
will depend on.
|
||||
|
||||
|
|
@ -34278,10 +34278,10 @@ Whether to preserve caches between service restarts.
|
|||
Available @code{mympd-ip-acl} fields are:
|
||||
|
||||
@table @asis
|
||||
@item @code{allow} (default: @code{()}) (type: list-of-strings)
|
||||
@item @code{allow} (default: @code{'()}) (type: list-of-strings)
|
||||
Allowed IP addresses.
|
||||
|
||||
@item @code{deny} (default: @code{()}) (type: list-of-strings)
|
||||
@item @code{deny} (default: @code{'()}) (type: list-of-strings)
|
||||
Disallowed IP addresses.
|
||||
|
||||
@end table
|
||||
|
|
@ -34471,7 +34471,7 @@ API access control scheme.
|
|||
By default an authenticated user is allowed access to all APIs. Access
|
||||
drivers can place restrictions on this.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -34531,7 +34531,7 @@ Defaults to @samp{#f}.
|
|||
@deftypevr {@code{libvirt-configuration} parameter} optional-list tls-allowed-dn-list
|
||||
Whitelist of allowed x509 Distinguished Name.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -34539,7 +34539,7 @@ Defaults to @samp{()}.
|
|||
Whitelist of allowed SASL usernames. The format for username depends on
|
||||
the SASL authentication mechanism.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -36270,14 +36270,14 @@ Defaults to @samp{#t}.
|
|||
List of common prefixes which, when combined with a repository URL,
|
||||
generates valid clone URLs for the repository.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
@deftypevr {@code{cgit-configuration} parameter} list clone-url
|
||||
List of @code{clone-url} templates.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -36570,7 +36570,7 @@ Defaults to @samp{""}.
|
|||
@deftypevr {@code{cgit-configuration} parameter} mimetype-alist mimetype
|
||||
Mimetype for the specified filename extension.
|
||||
|
||||
Defaults to @samp{((gif "image/gif") (html "text/html") (jpg
|
||||
Defaults to @samp{'((gif "image/gif") (html "text/html") (jpg
|
||||
"image/jpeg") (jpeg "image/jpeg") (pdf "application/pdf") (png
|
||||
"image/png") (svg "image/svg+xml"))}.
|
||||
|
||||
|
|
@ -36619,7 +36619,7 @@ A list of subdirectories inside of @code{repository-directory}, relative
|
|||
to it, that should loaded as Git repositories. An empty list means that
|
||||
all subdirectories will be loaded.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -36656,7 +36656,7 @@ Defaults to @samp{""}.
|
|||
@deftypevr {@code{cgit-configuration} parameter} robots-list robots
|
||||
Text used as content for the @code{robots} meta-tag.
|
||||
|
||||
Defaults to @samp{("noindex" "nofollow")}.
|
||||
Defaults to @samp{'("noindex" "nofollow")}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -36697,7 +36697,7 @@ Defaults to @samp{#f}.
|
|||
Text which specifies the default set of snapshot formats that cgit
|
||||
generates links for.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -36791,7 +36791,7 @@ Defaults to @samp{"/"}.
|
|||
@deftypevr {@code{cgit-configuration} parameter} repository-cgit-configuration-list repositories
|
||||
A list of @dfn{cgit-repo} records to use with config.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
Available @code{repository-cgit-configuration} fields are:
|
||||
|
||||
|
|
@ -36799,7 +36799,7 @@ Available @code{repository-cgit-configuration} fields are:
|
|||
A mask of snapshot formats for this repo that cgit generates links for,
|
||||
restricted by the global @code{snapshots} setting.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -36835,7 +36835,7 @@ Defaults to @samp{""}.
|
|||
@deftypevr {@code{repository-cgit-configuration} parameter} repo-list clone-url
|
||||
A list of URLs which can be used to clone repo.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -36985,7 +36985,7 @@ Text which will be used as the formatstring for a hyperlink when a
|
|||
submodule with the specified subdirectory path is printed in a directory
|
||||
listing.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -37036,7 +37036,7 @@ Defaults to @samp{""}.
|
|||
@deftypevr {@code{repository-cgit-configuration} parameter} repo-list extra-options
|
||||
Extra options will be appended to cgitrc file.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -37045,7 +37045,7 @@ Defaults to @samp{()}.
|
|||
@deftypevr {@code{cgit-configuration} parameter} list extra-options
|
||||
Extra options will be appended to cgitrc file.
|
||||
|
||||
Defaults to @samp{()}.
|
||||
Defaults to @samp{'()}.
|
||||
|
||||
@end deftypevr
|
||||
|
||||
|
|
@ -38006,7 +38006,7 @@ list or a string. For additional information, see @ref{Guile
|
|||
Syntax,,Job specification,mcron,the mcron manual}. By default this is
|
||||
set to run weekly on Sunday at 00:00.
|
||||
|
||||
@item @code{listed-in} (default: @code{("/etc/fstab" "/proc/self/mountinfo")}) (type: maybe-list-of-strings)
|
||||
@item @code{listed-in} (default: @code{'("/etc/fstab" "/proc/self/mountinfo")}) (type: maybe-list-of-strings)
|
||||
List of files in fstab or kernel mountinfo format. All missing or empty
|
||||
files are silently ignored. The evaluation of the list @emph{stops}
|
||||
after the first non-empty file. File systems with
|
||||
|
|
@ -38551,7 +38551,7 @@ Enable or disable debug output.
|
|||
@item @code{enable-iptables?} (default @code{#t})
|
||||
Enable or disable the addition of iptables rules.
|
||||
|
||||
@item @code{environment-variables} (default: @code{()})
|
||||
@item @code{environment-variables} (default: @code{'()})
|
||||
List of environment variables to set for @command{dockerd}.
|
||||
|
||||
This must be a list of strings where each string has the form
|
||||
|
|
@ -38845,14 +38845,14 @@ base default configuration that is to be extended with
|
|||
@item @code{run-directory} (default: @code{"/var/run/fail2ban"}) (type: string)
|
||||
The state directory for the @code{fail2ban} daemon.
|
||||
|
||||
@item @code{jails} (default: @code{()}) (type: list-of-fail2ban-jail-configurations)
|
||||
@item @code{jails} (default: @code{'()}) (type: list-of-fail2ban-jail-configurations)
|
||||
Instances of @code{<fail2ban-jail-configuration>} collected from
|
||||
extensions.
|
||||
|
||||
@item @code{extra-jails} (default: @code{()}) (type: list-of-fail2ban-jail-configurations)
|
||||
@item @code{extra-jails} (default: @code{'()}) (type: list-of-fail2ban-jail-configurations)
|
||||
Instances of @code{<fail2ban-jail-configuration>} explicitly provided.
|
||||
|
||||
@item @code{extra-content} (default: @code{()}) (type: text-config)
|
||||
@item @code{extra-content} (default: @code{'()}) (type: text-config)
|
||||
Extra raw content to add to the end of the @file{jail.local} file,
|
||||
provided as a list of file-like objects.
|
||||
|
||||
|
|
@ -38884,7 +38884,7 @@ Available @code{fail2ban-jail-action-configuration} fields are:
|
|||
@item @code{name} (type: string)
|
||||
Action name.
|
||||
|
||||
@item @code{arguments} (default: @code{()}) (type: list-of-arguments)
|
||||
@item @code{arguments} (default: @code{'()}) (type: list-of-arguments)
|
||||
Action arguments.
|
||||
|
||||
@end table
|
||||
|
|
@ -38955,7 +38955,7 @@ the ban IP address is considered.
|
|||
@item @code{ignore-self?} (type: maybe-boolean)
|
||||
Never ban the local machine's own IP address.
|
||||
|
||||
@item @code{ignore-ip} (default: @code{()}) (type: list-of-strings)
|
||||
@item @code{ignore-ip} (default: @code{'()}) (type: list-of-strings)
|
||||
A list of IP addresses, CIDR masks or DNS hosts to ignore.
|
||||
@code{fail2ban} will not ban a host which matches an address in this
|
||||
list.
|
||||
|
|
@ -38975,13 +38975,13 @@ The default time zone for log lines that do not have one.
|
|||
The encoding of the log files handled by the jail. Possible values are:
|
||||
@code{'ascii}, @code{'utf-8} and @code{'auto}.
|
||||
|
||||
@item @code{log-path} (default: @code{()}) (type: list-of-strings)
|
||||
@item @code{log-path} (default: @code{'()}) (type: list-of-strings)
|
||||
The file names of the log files to be monitored.
|
||||
|
||||
@item @code{action} (default: @code{()}) (type: list-of-fail2ban-jail-actions)
|
||||
@item @code{action} (default: @code{'()}) (type: list-of-fail2ban-jail-actions)
|
||||
A list of @code{<fail2ban-jail-action-configuration>}.
|
||||
|
||||
@item @code{extra-content} (default: @code{()}) (type: text-config)
|
||||
@item @code{extra-content} (default: @code{'()}) (type: text-config)
|
||||
Extra content for the jail configuration, provided as a list of file-like
|
||||
objects.
|
||||
|
||||
|
|
@ -39653,7 +39653,7 @@ points of the EFI file system, usually @file{/boot/efi}. For
|
|||
points corresponding to TFTP root directories served by your TFTP
|
||||
server.
|
||||
|
||||
@item @code{menu-entries} (default: @code{()})
|
||||
@item @code{menu-entries} (default: @code{'()})
|
||||
A possibly empty list of @code{menu-entry} objects (see below), denoting
|
||||
entries to appear in the bootloader menu, in addition to the current
|
||||
system entry and the entry pointing to previous system generations.
|
||||
|
|
@ -39767,9 +39767,9 @@ convention,,, grub, GNU GRUB manual}), for example:
|
|||
If the device is specified explicitly as above, then the @code{device}
|
||||
field is ignored entirely.
|
||||
|
||||
@item @code{linux-arguments} (default: @code{()})
|
||||
@item @code{linux-arguments} (default: @code{'()})
|
||||
The list of extra Linux kernel command-line arguments---e.g.,
|
||||
@code{("console=ttyS0")}.
|
||||
@code{'("console=ttyS0")}.
|
||||
|
||||
@item @code{initrd} (default: @code{#f})
|
||||
A G-Expression or string denoting the file name of the initial RAM disk
|
||||
|
|
@ -39794,10 +39794,10 @@ For example:
|
|||
(file-append mach "/boot/gnumach")
|
||||
@end lisp
|
||||
|
||||
@item @code{multiboot-arguments} (default: @code{()})
|
||||
@item @code{multiboot-arguments} (default: @code{'()})
|
||||
The list of extra command-line arguments for the multiboot-kernel.
|
||||
|
||||
@item @code{multiboot-modules} (default: @code{()})
|
||||
@item @code{multiboot-modules} (default: @code{'()})
|
||||
The list of commands for loading Multiboot modules. For example:
|
||||
|
||||
@lisp
|
||||
|
|
@ -42536,7 +42536,7 @@ that @file{~/.profile} is sourced by @file{~/.bash_profile} and
|
|||
Available @code{home-shell-profile-configuration} fields are:
|
||||
|
||||
@table @asis
|
||||
@item @code{profile} (default: @code{()}) (type: text-config)
|
||||
@item @code{profile} (default: @code{'()}) (type: text-config)
|
||||
@code{home-shell-profile} is instantiated automatically by
|
||||
@code{home-environment}, DO NOT create this service manually, it can
|
||||
only be extended. @code{profile} is a list of file-like objects, which
|
||||
|
|
@ -42565,13 +42565,13 @@ The Bash package to use.
|
|||
Add sane defaults like reading @file{/etc/bashrc} and coloring the output of
|
||||
@command{ls} to the top of the @file{.bashrc} file.
|
||||
|
||||
@item @code{environment-variables} (default: @code{()}) (type: alist)
|
||||
@item @code{environment-variables} (default: @code{'()}) (type: alist)
|
||||
Association list of environment variables to set for the Bash session. The
|
||||
rules for the @code{home-environment-variables-service-type} apply
|
||||
here (@pxref{Essential Home Services}). The contents of this field will be
|
||||
added after the contents of the @code{bash-profile} field.
|
||||
|
||||
@item @code{aliases} (default: @code{()}) (type: alist)
|
||||
@item @code{aliases} (default: @code{'()}) (type: alist)
|
||||
Association list of aliases to set for the Bash session. The aliases
|
||||
will be defined after the contents of the @code{bashrc} field has been
|
||||
put in the @file{.bashrc} file. The alias will automatically be quoted,
|
||||
|
|
@ -42587,19 +42587,19 @@ turns into
|
|||
alias ls="ls -alF"
|
||||
@end example
|
||||
|
||||
@item @code{bash-profile} (default: @code{()}) (type: text-config)
|
||||
@item @code{bash-profile} (default: @code{'()}) (type: text-config)
|
||||
List of file-like objects, which will be added to @file{.bash_profile}.
|
||||
Used for executing user's commands at start of login shell (In most
|
||||
cases the shell started on tty just after login). @file{.bash_login}
|
||||
won't be ever read, because @file{.bash_profile} always present.
|
||||
|
||||
@item @code{bashrc} (default: @code{()}) (type: text-config)
|
||||
@item @code{bashrc} (default: @code{'()}) (type: text-config)
|
||||
List of file-like objects, which will be added to @file{.bashrc}. Used
|
||||
for executing user's commands at start of interactive shell (The shell
|
||||
for interactive usage started by typing @code{bash} or by terminal app
|
||||
or any other program).
|
||||
|
||||
@item @code{bash-logout} (default: @code{()}) (type: text-config)
|
||||
@item @code{bash-logout} (default: @code{'()}) (type: text-config)
|
||||
List of file-like objects, which will be added to @file{.bash_logout}.
|
||||
Used for executing user's commands at the exit of login shell. It won't
|
||||
be read in some cases (if the shell terminates by exec'ing another
|
||||
|
|
@ -42636,24 +42636,24 @@ You would then add @code{bash-fancy-prompt-service} to the list in the
|
|||
Available @code{home-bash-extension} fields are:
|
||||
|
||||
@table @asis
|
||||
@item @code{environment-variables} (default: @code{()}) (type: alist)
|
||||
@item @code{environment-variables} (default: @code{'()}) (type: alist)
|
||||
Additional environment variables to set. These will be combined with the
|
||||
environment variables from other extensions and the base service to form one
|
||||
coherent block of environment variables.
|
||||
|
||||
@item @code{aliases} (default: @code{()}) (type: alist)
|
||||
@item @code{aliases} (default: @code{'()}) (type: alist)
|
||||
Additional aliases to set. These will be combined with the aliases from
|
||||
other extensions and the base service.
|
||||
|
||||
@item @code{bash-profile} (default: @code{()}) (type: text-config)
|
||||
@item @code{bash-profile} (default: @code{'()}) (type: text-config)
|
||||
Additional text blocks to add to @file{.bash_profile}, which will be combined
|
||||
with text blocks from other extensions and the base service.
|
||||
|
||||
@item @code{bashrc} (default: @code{()}) (type: text-config)
|
||||
@item @code{bashrc} (default: @code{'()}) (type: text-config)
|
||||
Additional text blocks to add to @file{.bashrc}, which will be combined
|
||||
with text blocks from other extensions and the base service.
|
||||
|
||||
@item @code{bash-logout} (default: @code{()}) (type: text-config)
|
||||
@item @code{bash-logout} (default: @code{'()}) (type: text-config)
|
||||
Additional text blocks to add to @file{.bash_logout}, which will be combined
|
||||
with text blocks from other extensions and the base service.
|
||||
|
||||
|
|
@ -42675,33 +42675,33 @@ Place all the configs to @file{$XDG_CONFIG_HOME/zsh}. Makes
|
|||
Shell startup process will continue with
|
||||
@file{$XDG_CONFIG_HOME/zsh/.zshenv}.
|
||||
|
||||
@item @code{environment-variables} (default: @code{()}) (type: alist)
|
||||
@item @code{environment-variables} (default: @code{'()}) (type: alist)
|
||||
Association list of environment variables to set for the Zsh session.
|
||||
|
||||
@item @code{zshenv} (default: @code{()}) (type: text-config)
|
||||
@item @code{zshenv} (default: @code{'()}) (type: text-config)
|
||||
List of file-like objects, which will be added to @file{.zshenv}. Used
|
||||
for setting user's shell environment variables. Must not contain
|
||||
commands assuming the presence of tty or producing output. Will be read
|
||||
always. Will be read before any other file in @env{ZDOTDIR}.
|
||||
|
||||
@item @code{zprofile} (default: @code{()}) (type: text-config)
|
||||
@item @code{zprofile} (default: @code{'()}) (type: text-config)
|
||||
List of file-like objects, which will be added to @file{.zprofile}. Used
|
||||
for executing user's commands at start of login shell (In most cases the
|
||||
shell started on tty just after login). Will be read before
|
||||
@file{.zlogin}.
|
||||
|
||||
@item @code{zshrc} (default: @code{()}) (type: text-config)
|
||||
@item @code{zshrc} (default: @code{'()}) (type: text-config)
|
||||
List of file-like objects, which will be added to @file{.zshrc}. Used
|
||||
for executing user's commands at start of interactive shell (The shell
|
||||
for interactive usage started by typing @code{zsh} or by terminal app or
|
||||
any other program).
|
||||
|
||||
@item @code{zlogin} (default: @code{()}) (type: text-config)
|
||||
@item @code{zlogin} (default: @code{'()}) (type: text-config)
|
||||
List of file-like objects, which will be added to @file{.zlogin}. Used
|
||||
for executing user's commands at the end of starting process of login
|
||||
shell.
|
||||
|
||||
@item @code{zlogout} (default: @code{()}) (type: text-config)
|
||||
@item @code{zlogout} (default: @code{'()}) (type: text-config)
|
||||
List of file-like objects, which will be added to @file{.zlogout}. Used
|
||||
for executing user's commands at the exit of login shell. It won't be
|
||||
read in some cases (if the shell terminates by exec'ing another process
|
||||
|
|
@ -42747,7 +42747,7 @@ Available @code{home-mcron-configuration} fields are:
|
|||
@item @code{mcron} (default: @code{mcron}) (type: file-like)
|
||||
The mcron package to use.
|
||||
|
||||
@item @code{jobs} (default: @code{()}) (type: list-of-gexps)
|
||||
@item @code{jobs} (default: @code{'()}) (type: list-of-gexps)
|
||||
This is a list of gexps (@pxref{G-Expressions}), where each gexp
|
||||
corresponds to an mcron job specification (@pxref{Syntax, mcron job
|
||||
specifications,, mcron,GNU@tie{}mcron}).
|
||||
|
|
@ -43571,7 +43571,7 @@ Available @code{home-msmtp-configuration} fields are:
|
|||
@item @code{defaults} (type: msmtp-configuration)
|
||||
The configuration that will be set as default for all accounts.
|
||||
|
||||
@item @code{accounts} (default: @code{()}) (type: list-of-msmtp-accounts)
|
||||
@item @code{accounts} (default: @code{'()}) (type: list-of-msmtp-accounts)
|
||||
A list of @code{msmtp-account} records which contain information about
|
||||
all your accounts.
|
||||
|
||||
|
|
|
|||
Reference in New Issue