This makes sure users do not mistakenly configuring a network with "/0"
as its netmask.
* gnu/services/base.scm (assert-valid-address): New procedure.
(<network-address>)[value]: Add it as 'sanitize'.
* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (%qemu-static-networking): New variable.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
* gnu/services/base.scm (static-networking-shepherd-service): Define
'set-up-via-ioctl', 'tear-down-via-ioctl', 'set-up-via-netlink',
'tear-down-via-netlink', and 'helpers' and use them in 'start' and
'stop'. Add (ip *) modules to 'modules'.
* gnu/services/base.scm (swap-service-type): Use default flags (0) if
SWAP is not a new-style <swap-space> record.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
Fixes <https://issues.guix.gnu.org/40158>.
* gnu/services/base.scm (file-system-shepherd-service): Update doc. Return a
shepherd service for the mount point when either MOUNT? or CREATE? is true.
[start]: Only mount when MOUNT? is true.
(file-system-shepherd-services): Also consider file systems with
create-mount-point? set to #t.
It's more explicit to specify used fields instead of depending on their
position.
* gnu/services/base.scm (guix-activation): Replace "match" with
"match-record".
This follows on from the changes in 4985a42724.
* gnu/services/base.scm (%default-authorized-guix-keys): Add
bordeaux.guix.gnu.org.pub.
Signed-off-by: Christopher Baines <mail@cbaines.net>
That way, the default config with (advertises? #t) and without a cache
will offer zstd-compressed substitutes, which should lead to much higher
throughput than gzip.
* gnu/services/base.scm (default-compression): When
'guix-publish-configuration-cache' returns true, use higher level
compression ratios. Add "zstd".
* doc/guix.texi (Base Services): Mention zstd.
References:
https://sysctl-explorer.net/fs/protected_hardlinks/https://sysctl-explorer.net/fs/protected_symlinks/
* gnu/services/sysctl.scm (%default-sysctl-settings): New public variable.
(<sysctl-configuration>): Use %default-sysctl-settings as the default value.
* gnu/services/base.scm (%base-services): Add sysctl-service-type.
* doc/guix.texi (Miscellaneous Services): Document the new defaults.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* guix/scripts/publish.scm (%options): Add "--advertise" option.
(show-help): Document it.
(service-name): New procedure,
(publish-service-type): new variable.
(run-publish-server): Add "advertise?" and "port" parameters. Use them to publish
the server using Avahi.
(guix-publish): Pass the "advertise?" option to "run-publish-server".
* gnu/services/base.scm (<guix-publish-configuration>): Add "advertise?"
field.
(guix-publish-shepherd-service): Honor it.
Fixes a regression introduced in
977eb5d023 whereby file system services
would now have a different name.
* gnu/services/base.scm (file-system->shepherd-service-name): Revert
changes introduced in 977eb5d023.
* gnu/services/shepherd.scm (%store-characters): New variable
(shepherd-service-file-name): Map all the characters outside
%STORE-CHARACTERS to #\-.
Fixes <https://bugs.gnu.org/44626>.
Reported by Vagrant Cascadian <vagrant@debian.org>.
* tests/build-utils.scm ("wrap-script, simple case"): Pass
SCRIPT-CONTENTS to 'display' rather than 'format'.
* gnu/services/base.scm (file-system->shepherd-service-name)
[valid-characters, mount-point]: New variables.
Filter out invalid store file name characters from the mount point of
FILE-SYSTEM.
Also change the default configuration to clear on logout, which is the
upstream default.
* gnu/services/base.scm (<mingetty-configuration>): Add 'clear-on-logout?'
field.
(mingetty-shepherd-service): Pass the "--noclear" option to mingetty only if
'clear-on-logout?' is #false.
* doc/guix.texi (Base Services): Document the 'clear-on-logout?' field.
Fixes a bug whereby different users would get different derivations for
the same service.
* gnu/services/base.scm (guix-shepherd-service): In 'start' method, do
not embed (guix config).
This is a followup to ecaa102a58.
* gnu/services/base.scm (<guix-publish-configuration>)[cache-bypass-threshold]:
New field.
(guix-publish-shepherd-service): Honor it.
* gnu/services/base.scm (swap-service-type)[device-lookup, device-name]:
New variables.
Add 'modules' field to 'shepherd-service'. In 'start' and 'stop', use
'device-lookup' to resolve UUIDs and labels.
* doc/guix.texi (operating-system Reference): Adjust accordingly.
Fixes <https://bugs.gnu.org/39819>.
Reported by Maxim Cournoyer <maxim.cournoyer@gmail.com>.
* gnu/services/base.scm (substitute-key-authorization): Symlink
DEFAULT-ACL to /etc/guix/acl unconditionally. Add code to optionally
back up /etc/guix/acl if it was possibly modified by hand.
* doc/guix.texi (Base Services): Clarify the effect of setting
'authorize-keys?' to true. Mention the backup. Give an example showing
how to authorize substitutes from another server.
When the store overlay is mounted, other processes such as kmscon, udev
and guix-daemon may open files from the store, preventing the
underlying install support from being umounted. See:
https://lists.gnu.org/archive/html/guix-devel/2018-12/msg00161.html.
To avoid this situation, mount the store overlay inside a container,
and run the installation from within that container.
* gnu/build/shepherd.scm (fork+exec-command/container): New procedure.
* gnu/services/base.scm (guix-shepherd-service): Support an optional PID
argument passed to the "start" method. If that argument is passed, ensure that
guix-daemon enters the given PID MNT namespace by using
fork+exec-command/container procedure.
* gnu/installer/final.scm (umount-cow-store): Remove it,
(install-system): run the installation from within a container.
* gnu/installer/newt/final.scm (run-install-shell): Remove the display hack.
This is a follow-up of 755f365b02.
As (zlib) is autoloaded in (gnu build linux-modules), "guile-zlib" is needed
as an extension only when it is effectively used.
* gnu/installer.scm (installer-program): Remove "guile-zlib" from the extensions.
* gnu/machine/ssh.scm (machine-check-initrd-modules): Ditto.
* gnu/services.scm (activation-script): Ditto.
* gnu/services/base.scm (default-serial-port): Ditto,
(agetty-shepherd-service): ditto,
(udev-service-type): ditto.
* gnu/system/image.scm (gcrypt-sqlite3&co): Ditto.
* gnu/system/shadow.scm (account-shepherd-service): Ditto.
This commit adds support for GZIP compression for linux-libre kernel
modules. The initrd modules are kept uncompressed as the initrd is already
compressed as a whole.
The linux-libre kernel also supports XZ compression, but as Guix does not have
any available bindings for now, and the compression time is far more
significant, GZIP seems to be a better option.
* gnu/build/linux-modules.scm (modinfo-section-contents): Use
'call-with-gzip-input-port' to read from a module file using '.gz' extension,
(strip-extension): new procedure,
(dot-ko): adapt to support compression,
(ensure-dot-ko): ditto,
(file-name->module-name): ditto,
(find-module-file): ditto,
(load-linux-module*): ditto,
(module-name->file-name/guess): ditto,
(module-name-lookup): ditto,
(write-module-name-database): ditto,
(write-module-alias-database): ditto,
(write-module-device-database): ditto.
* gnu/installer.scm (installer-program): Add "guile-zlib" to the extensions.
* gnu/machine/ssh.scm (machine-check-initrd-modules): Ditto.
* gnu/services.scm (activation-script): Ditto.
* gnu/services/base.scm (default-serial-port): Ditto,
(agetty-shepherd-service): ditto,
(udev-service-type): ditto.
* gnu/system/image.scm (gcrypt-sqlite3&co): Ditto.
* gnu/system/linux-initrd.scm (flat-linux-module-directory): Add "guile-zlib"
to the extensions and make sure that the initrd only contains
uncompressed module files.
* gnu/system/shadow.scm (account-shepherd-service): Add "guile-zlib" to the
extensions.
* guix/profiles.scm (linux-module-database): Ditto.
Commit 6680880f9b pushes out a new guix
package with a new key location, so we need to update to the new key
in order for systems to build correctly.
* gnu/services/base.scm (%default-authorized-guix-keys): Refer to berlin.guix.gnu.org.pub.
This reverts commit 4c0cc7bed3.
Fixes <https://bugs.gnu.org/41116>.
Reported by Alex Sassmannshausen <alex@komputilo.eu>.
The problem is that reconfiguring on a system running Shepherd < 0.8.0
would lead to an error, due to #:file-creation-mask not being supported.
The error is rather harmless: it prevents service upgrade but the system
itself is upgraded.
We can reinstate that commit eventually, once #:file-creation-mask has
become widespread.
This is a followup to d7113bb655 and
e3358a831e.
* gnu/services/base.scm (syslog-service-type): Change 'start' method to set
umask using the #:file-creation-mask parameter of
'make-forkexec-constructor' introduced in version 0.8.0 of the Shepherd.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Passing 'make-forkexec-constructor' a string or several string arguments
has been deprecated since dmd 0.1.
* gnu/services/base.scm (rngd-service-type): In 'start' method, pass a
list as the first argument to 'make-forkexec-constructor'.
* gnu/services/desktop.scm (bluetooth-shepherd-service): Likewise.
* gnu/services/spice.scm (spice-vdagent-shepherd-service): Likewise.
Fixes <https://bugs.gnu.org/25569>.
Reported by Divan Santana <divan@santanas.co.za>.
* gnu/services/base.scm (shepherd-set-http-proxy-action): New procedure.
(guix-shepherd-service): Add 'actions' field. Change 'start' to a
lambda; check the value of the "http_proxy" environment variable and
add "http_proxy" and "https_proxy" to #:environment-variables as a
function of that.
* gnu/tests/base.scm (run-basic-test)["guix-daemon set-http-proxy
action", "guix-daemon set-http-proxy action, clear"]: New tests.
* doc/guix.texi (Base Services): Document it.
Partly fixes <https://bugs.gnu.org/40405>.
Reported by Diego Nicola Barbato <dnbarbato@posteo.de>.
* gnu/services/base.scm (syslog-service-type): Change 'start' method to
set umask to #o137 before spawning syslogd.
* gnu/tests/base.scm (run-basic-test)["/var/log/messages is not
world-readable"]: New test.
* gnu/services/base.scm (%base-services): Add an instance of
ROTTLOG-SERVICE-TYPE.
* doc/guix.texi (Log Rotation): Mention that it's part of
%BASE-SERVICES and change example.
Discussed at <https://bugs.gnu.org/39926>.
* gnu/packages/linux.scm (eudev/btrfs-fix): New variable.
* gnu/services/base.scm (<udev-configuration>)[udev]: Default to it.
(udev-service): Likewise for #:udev.
Fixes <https://bugs.gnu.org/39671>.
* gnu/services/base.scm (udev-shepherd-service)[start] Move or copy
environment variables to 'fork+exec-command' instead of 'setenv'.
This solution was kindly provided by Bernard M. Wiedemann.
* gnu/services/base.scm (console-font-service-type): Add ter132n (terminus 132
nomal) font example, for HDPI displays.
* doc/guix.texi (Invoking guix system): Update to `guix system search console'
example output.
This is a followup to commit 62c2217570.
* gnu/services/base.scm (agetty-shepherd-service)[start]: Wrap un
'with-imported-modules'. This fixes a build error when TTY is true
("no code for module (gnu build linux-boot)").
Partly fixes <https://bugs.gnu.org/37501>.
Reported by Marius Bakke <mbakke@fastmail.com>.
* gnu/services/base.scm (urandom-seed-shepherd-service): In 'start'
method, add calls to 'add-to-entropy-count'.
* gnu/services/base.scm (pam-limits-service-type): For "gdm-password" pam
service, include "limits.conf".
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
This reverts commit 3b38bf141a.
The Guix project discussed this years ago and decided against including
/usr/bin/env. That decision should not be reversed without a wider
discussion.
This makes it easier to read the output, as it's recorded in a file.
* gnu/services/base.scm (guix-publish-shepherd-service): Add #:log-file to
make-forkexec-constructor.
This is a followup to b8fa86adfc.
* guix/deprecation.scm (warn-about-deprecation): Make public.
* gnu/services/base.scm (<guix-publish-configuration>)[compression]: New
field.
[compression-level]: Default to #f. Add '%' to getter name.
(guix-publish-configuration-compression-level): Define as deprecated.
(default-compression): New procedure.
(guix-publish-shepherd-service)[config->compression-options]: New
procedure.
Use 'match-record' instead of 'match'.
* doc/guix.texi (Base Services): Remove 'compression-level' and document
'compression'.
Fixes a longstanding issue whereby, due to our long fstab that included
pseudo file systems like cgroup mounts, graphical file managers would
display all of these. Initially reported at
<https://lists.gnu.org/archive/html/help-guix/2017-11/msg00084.html>.
* gnu/services/base.scm (file-system-fstab-entries): New procedure.
(file-system-service-type): Use it to extend FSTAB-SERVICE-TYPE.
This makes the first boot slightly faster.
* gnu/services/base.scm (not-config?): New procedure.
(hydra-key-authorization): Rewrite to pre-compute the default ACL, and
pre-compute it using (guix pki) directly.
Until now we were allocating the UIDs of build users above 30000, which
is in "normal" user UID range. This static allocation was unnecessary,
so this change lets the system allocate UIDs in the system range (below
1000).
* gnu/services/base.scm (guix-build-accounts): Remove #:first-uid, and
remove 'uid' field from 'user-account'.
kmscon does not require that virtual terminals run in UTF-8 mode.
* gnu/services/base.scm (kmscon-service-type): Remove virtual-terminal from
requirement list.
These procedures were already either undocumented (and de facto
deprecated) or documented as deprecated or redundant.
* gnu/services/base.scm (guix-service, guix-publish-service): Mark as
deprecated.
* gnu/services/mcron.scm (mcron-service): Likewise.
* gnu/services/networking.scm (tor-service): Likewise.
* doc/guix.texi (Scheduled Job Execution): Remove 'mcron-service' and
adjust example.
(Networking Services): Remove 'tor-service'.
* gnu/tests/base.scm (%mcron-os): Use 'mcron-service-type' instead of
'mcron-service'.
* gnu/tests/networking.scm (%tor-os): Use 'tor-service-type' instead of
'tor-service'.
* tests/guix-system.sh: Likewise.
Previously, the 'unless (file-exists? "/etc/guix/acl")' guard would mean
that only the first key in the list would get registered since were were
generating one registration snippet per key. This fixes that.
* gnu/services/base.scm (hydra-key-authorization): Change to be a
'for-each' loop iterating on #$KEYS.
Add an auto-login option that behaves as the one of mingetty-service.
* gnu/services/base.scm (kmscon-configuration)[auto-login]: New field.
(kmscon-service-type): Pass it to kmscon command.
* doc/guix.texi (Base Services): Document it.
Fixes a bug in containers whereby 'virtual-terminal' would always fail
to start because writing to /sys/…/default_utf8 would fail with EROFS.
* gnu/services/base.scm (virtual-terminal-service-type): Read from
"default_utf8" before attempting to write to it.
* gnu/services/base.scm (udev-shepherd-service)[start](find): Remove.
(udev): Hardwire the eudev file name.
Use 'fork+exec-command' instead of 'primitive-fork' and 'exec-command'.
The previous implementation of 'read-reference-graph' was good enough
for many use cases, but it discarded the graph structure, which is
useful information in some cases.
* guix/build/store-copy.scm (<store-info>): New record type.
(read-reference-graph): Rewrite to return a list of <store-info>.
(closure-size, populate-store): Adjust accordingly.
* gnu/services/base.scm (references-file): Adjust accordingly.
* gnu/system/vm.scm (system-docker-image): Likewise.
* guix/scripts/pack.scm (squashfs-image, docker-image): Likewise.
* tests/gexp.scm ("gexp->derivation #:references-graphs"): Likewise.
Fixes a regression introduced in
a5acc17a3c.
Reported by Tobias Geerinckx-Rice <me@tobias.gr>.
* gnu/services/base.scm (file-system->fstab-entry): Pass LABEL, not
FILE-SYSTEM, to 'file-system-label->string'.
The 'title' field was easily overlooked and was an endless source of
confusion. Now, the value of the 'device' field is self-contained.
* gnu/system/file-systems.scm (<file-system>): Change constructor name
to '%file-system'.
[title]: Remove.
(<file-system-label>): New record type with printer.
(report-deprecation, device-expression)
(process-file-system-declaration, file-system): New macros.
(file-system-title): New procedure.
(file-system->spec, spec->file-system): Adjust to handle
<file-system-label>.
* gnu/system.scm (bootable-kernel-arguments): Add case for
'file-system-label?'.
(read-boot-parameters): Likewise.
(mapped-device-user): Avoid 'file-system-title'.
(fs->boot-device): Remove.
(operating-system-boot-parameters): Use 'file-system-device' instead of
'fs->boot-device'.
(device->sexp): Add case for 'file-system-label?'.
* gnu/bootloader/grub.scm (grub-root-search): Add case for
'file-system-label?'.
* gnu/system/examples/bare-bones.tmpl,
gnu/system/examples/beaglebone-black.tmpl,
gnu/system/examples/lightweight-desktop.tmpl,
gnu/system/examples/vm-image.tmpl: Remove uses of 'title'.
* gnu/system/vm.scm (virtualized-operating-system): Remove uses of
'file-system-title'.
* guix/scripts/system.scm (check-file-system-availability): Likewise,
and adjust fix-it hint.
(check-initrd-modules)[file-system-/dev]: Likewise.
* gnu/build/file-systems.scm (canonicalize-device-spec): Remove 'title'
parameter.
[canonical-title]: Remove.
Match on SPEC's type rather than on CANONICAL-TITLE.
(mount-file-system): Adjust caller.
* gnu/build/linux-boot.scm (boot-system): Interpret ROOT here.
* gnu/services/base.scm (file-system->fstab-entry): Remove use of
'file-system-title'.
* doc/guix.texi (File Systems): Remove documentation of the 'title'
field. Rewrite documentation of 'device' and document
'file-system-label'.
* gnu/services/base.scm (%default-gpm-options): New variable.
(<gpm-configuration>)[gpm, options]: Add default values.
(gpm-service-type)[default-value]: New field.
(gpm-service): Use %DEFAULT-GPM-OPTIONS and mark as deprecated.
* doc/guix.texi (Base Services): Document 'gpm-service-type' and
'gpm-configuration'. Remove 'gpm-service'.
Previously the KNOWN-FS value used in 'essential-services' would be
incomplete: it would lack all the file systems provided by services that
extend 'file-system-service-type' (/sys/fs/cgroup,
/proc/sys/fs/binfmt_misc, etc.) Consequently, upon shutdown,
'user-processes' would unmount these file systems before their
corresponding service had been stopped; when their corresponding (e.g.,
'file-system-/proc/sys/fs/binfmt_misc') was stopped, its 'umount' call
would fail.
This was harmless in practice, but this patch makes sure things work as
intended and file systems are unmounted in the right order.
* gnu/services/base.scm (file-system-shepherd-services): Instantiate
'user-file-systems' Shepherd service from here.
(user-unmount-service-type, user-unmount-service): Remove.
* gnu/system.scm (essential-services): Remove call to 'user-unmount-service'.
* gnu/system/install.scm (cow-store-service-type): Adjust comment.
* gnu/services/base.scm (<guix-configuration>)[chroot-directories]: New
field.
(guix-shepherd-service): Honor it.
(references-file): New procedure.
(guix-service-type)[compose, extend]: New fields.
* gnu/services/base.scm (urandom-seed-service-type)[default-value]: New
field.
(urandom-seed-service): Mark as deprecated.
(%base-services): Use URANDOM-SEED-SERVICE-TYPE directly.
* gnu/services/base.scm (%base-services):
* doc/guix.texi (Base Services): Document 'urandom-seed-service-type'
instead of 'urandom-seed-service'.
This ensures that 'urandom-seed' is started before programs that rely on
sources of randomness.
Fixes <https://bugs.gnu.org/29773>.
Reported by Leo Famulari <leo@famulari.name>.
* gnu/services/base.scm (urandom-seed-shepherd-service): Change
'requirement' to (file-systems).
(urandom-seed-service-type): Extend USER-PROCESSES-SERVICE-TYPE.
* gnu/services/base.scm (user-processes-shepherd-service): New
procedure, taken from former 'user-processes-service-type'. Add
REQUIREMENTS argument; remove GRACE-DELAY argument.
(user-processes-service-type): Redefine in terms of 'service-type'.
(user-processes-service): Remove.
(file-system-service-type): Extend USER-PROCESSES-SERVICE-TYPE.
* gnu/system.scm (essential-services): Use USER-PROCESSES-SERVICE-TYPE
directly.
* gnu/services/base.scm (urandom-seed-shepherd-service): Try to read from
'/dev/hwrng' at boot, as a supplement to any saved random seed.
* doc/guix.texi (Base Services): Document the new feature.
This is more robust, faster, and incidentally gets rid of remaining
"error in the finalization thread: Bad file descriptor" messages.
* gnu/services/base.scm (unicode-start): Rewrite to use 'tcgetattr' and
'tcsetattr'.
(console-font-shepherd-services)[start]: Add 'loop' to check whether
DEVICE is ready. Tolerate EX_OSERR return from 'setfont'.
[modules]: New field.
This is a followup to b8f59cdc20e9d83ce63523ef917e95fcee07f134:
'list-runtime-roots' no longer depends on 'lsof'.
* gnu/services/base.scm (<guix-configuration>)[lsof]: Remove.
(guix-shepherd-service): Adjust accordingly.
* doc/guix.texi (Base Services): Adjust accordingly.
* gnu/system.scm (%base-packages): Remove LSOF.
This function allows passing a file-like object to the udev service.
* gnu/services/base.scm (file->udev-rule): New function.
* doc/guix.texi (Base Services): Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/build/file-systems.scm (mount-file-system): Rename 'spec' to 'fs'
and assume it's a <file-system>.
* gnu/build/linux-boot.scm (boot-system): Assume MOUNTS is a list of
<file-system> and adjust accordingly.
* gnu/build/linux-container.scm (mount-file-systems): Remove
'file-system->spec' call.
* gnu/services/base.scm (file-system-shepherd-service): Add
'spec->file-system' call. Add (gnu system file-systems) to 'modules'.
* gnu/system/linux-initrd.scm (raw-initrd): Use (gnu system
file-systems). Add 'spec->file-system' call for #:mounts.
Mathieu Othacehe
Ludovic Courtès
Tobias Geerinckx-Rice
Josselin Poiret
Maxim Cournoyer
muradm
Brice Waegeneire
luhui
Jack Hill
qblade
Leo Famulari
Mikhail Tsykalov
Marius Bakke
Mark H Weaver
Oleg Pykhalov
Christopher Lemmer Webber
Marius Bakke
Giacomo Leidi
Diego Nicola Barbato
Florian Pelz
Mathieu Othacehe
Efraim Flashner
Jan Nieuwenhuizen
Ricardo Wurmus
Jesse Gibbons
John Soo
Christopher Baines
Danny Milosavljevic
Hartmut Goebel