Reported by bjc on #guix.
* gnu/services/base.scm (valid-name, cidr->netmask): Wrap in 'eval-when'
since they are used by "compile-time procedures" (macros).
The 'stop' method of Shepherd services is supposed to return #f on
success.
* gnu/services/base.scm (console-font-shepherd-services): 'stop' method
returns #f.
* gnu/services/networking.scm (connman-shepherd-service): Make 'networking a
virtual service and set 'connman as its canonical name.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
According to the semantics in [1], 'networking should be a "virtual service"
and NetworkManager its canonical-name. This does not influence
existing services and they should continue to use the 'networking symbol.
One visible change is that 'herd status' doesn't show 'networking' anymore,
instead listing 'NetworkManager' in its place but both symbols are can be used
to start and stop the same service.
Note: Though the symbol NetworkManager doesn't really conform with the overall kebab-case
used throughout Guix, this is intentional as we really want to make it clear that
that the symbol NetworkManager really refers to the software called NetworkManager,
since it's a canonical name here. (rather than risk misleading the user to interpret
the symbol network-manager as a symbol for some unspecific network management software)
[1]: https://www.gnu.org/software/shepherd/manual/html_node/Jump-Start.html
* gnu/services/networking.scm (network-manager-shepherd-service): Make 'networking a
virtual service and set 'NetworkManager as its canonical name.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This is similar to its NetworkManager-wait-online.service systemd counterpart,
with the main difference being that we handle it all in 'networking symbol, rather than
introduce a new 'networking-online symbol. (see discussion #47253)
As a result of this change, with opensmtpd-service-type as an example,
manual 'herd restart smtpd' after system bootups are no longer required
when opensmtpd is configured with a smtpd.conf containing non-loopback interfaces.
(this issue is described in more detail at #60300)
Fixes <https://issues.guix.gnu.org/60300>.
* gnu/services/networking.scm (network-manager-shepherd-service): Await for
NetworkManager to finish starting up.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/networking.scm (<connman-configuration>)
[iwd?]: Use helper to warn deprecated field.
(connman-shepherd-service): Make iwd? a local variable independent from
the deprecated field.
* doc/guix.texi (Networking Setup): Remove mention of iwd? field.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/networking.scm (warn-iwd?-field-deprecation): New procedure,
helper for deprecated field.
(<network-manager-configuration>)[iwd?]: Use helper to warn deprecated field.
(network-manager-shepherd-service): Make iwd? a local variable independent
from the deprecated field.
* doc/guix.texi (Networking Setup): Remove mention of iwd? field.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Note: This also makes wpa-supplicant an optional requirement.
* gnu/services/networking.scm (<network-manager-configuration>)
[shepherd-requirement]: New field.
(network-manager-shepherd-service): Honor it.
(network-manager-configuration-shepherd-requirement): Export accessor.
* doc/guix.texi (Networking Setup): Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
The Knot DNS service in Guix uses two days, or 48 hours, for the SOA
refresh interval but that is outside the range of RFC 1912, which is
entitled "Common DNS Operational and Configuration Errors." [1]
Section 2.2 of RFC 1912 recommends a maximum of 12 hours for the SOA
refresh rate: "You can keep it short (20 mins to 2 hours) if you
aren't worried about a small increase in bandwidth used, or longer
(2-12 hours) if your Internet connection is slow or is started on
demand."
This commit sets the default refresh interval at the nearest value
recommended by the standard, which is 12 hours.
Due to the widespread adoption of NOTIFY messages between primary and
secondary DNS servers, the SOA refresh interval has arguably lost some
importance, but the Guix default should still be in line with the
standards.
Values outside the recommended range can provoke warning messages from
services commonly used to find bugs in DNS configurations, such as the
MX Toolbox Super Tool. [2]
[1] https://datatracker.ietf.org/doc/rfc1912/
[2] https://mxtoolbox.com/SuperTool.aspx
* gnu/services/dns.scm (<zone-file>)[refresh]: Default to (* 12 3600).
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
* gnu/services/desktop.scm (<sugar-desktop-configuration>): Add new fields for
activities and gobject-introspection.
(sugar-gobject-introspection, sugar-activities): New procedures.
(sugar-desktop-service-type): Install packages for activities and
gobject-introspection alongside the sugar package.
* doc/guix.texi (Desktop Services): Document changes.
Fixes <https://issues.guix.gnu.org/61201>.
Previously, common practice was to splice arbitrary strings (user names,
file names, etc.) into Texinfo snippets passed to 'display-hint'. This
is unsafe in the general case because at signs and braces need to be
escaped to produced valid Texinfo. This commit addresses that.
* guix/ui.scm (texinfo-quote): New procedure.
(display-hint): When ARGUMENTS is non-empty, pass it to 'texinfo-quote'
and call 'format'.
(report-unbound-variable-error, check-module-matches-file)
(display-collision-resolution-hint, run-guix-command): Remove explicit
'format' call; pass 'format' arguments as extra arguments to 'display-hint'.
* gnu/services/monitoring.scm (zabbix-front-end-config): Likewise.
* guix/scripts.scm (warn-about-disk-space): Likewise.
* guix/scripts/build.scm (%standard-cross-build-options)
(%standard-native-build-options): Likewise.
* guix/scripts/describe.scm (display-checkout-info): Likewise.
* guix/scripts/environment.scm (suggest-command-name): Likewise.
* guix/scripts/home.scm (process-command): Likewise.
* guix/scripts/home/edit.scm (service-type-not-found): Likewise.
* guix/scripts/import.scm (guix-import): Likewise.
* guix/scripts/package.scm (display-search-path-hint): Likewise.
* guix/scripts/pull.scm (build-and-install): Likewise.
* guix/scripts/shell.scm (auto-detect-manifest): Likewise.
* guix/scripts/system.scm (check-file-system-availability): Likewise.
(guix-system): Likewise.
* guix/scripts/system/edit.scm (service-type-not-found): Likewise.
* guix/status.scm (print-build-event): Likewise.
This follows up on commit ae0975332c60818793c6c63a3646c982d686bf49?.
* gnu/services/desktop.scm (geoclue-service-type): Set default-value.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
* doc/guix.texi (Miscellaneous Services): Replace 'lirc-service' with 'lirc-service-type'.
Document <lirc-configuration>.
* gnu/services/lirc.scm (<lirc-configuration>): Set default values based on
the arguments from the now deprecated 'lirc-service' procedure.
(lirc-service-type): Set default value.
(lirc-service): Deprecate procedure.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Desktop Services): Replace 'geoclue-service' with 'geoclue-service-type'.
* gnu/services/desktop.scm (<geoclue-configuration>): Set default values
based on the values from the now deprecated geoclue-service procedure.
(geoclue-service): Deprecate procedure.
(desktop-services-for-system): Use geoclue-service-type.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/desktop.scm (<elogind-configuration>)[handle-hibernate-key]: Set default value to 'hibernate.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Networking Services): Remove mention of lsh-service.
Document lsh-service-type and lsh-service-configuration.
* gnu/services/ssh.scm (<lsh-configuration>): Set default values based
on the now deprecated 'lsh-service' procedure.
(lsh-service-type): Set default value.
(lsh-service): Deprecate procedure.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Base Services): Replace rngd-service with rngd-service-type.
Document <rngd-configuration>.
* gnu/services/base.scm (<rngd-configuration>): Set default values from
the values in the now deprecated 'rngd-service' procedure.
(rngd-service): Deprecate procedure.
(rngd-service-type): Set default value.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/desktop.scm (gnome-setuid-programs): New variable.
(gnome-desktop-service-type): Extend setuid-program-service-type with it.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/desktop.scm (<gnome-desktop-configuration>): Rename gnome
package accessor to gnome-desktop-configuration-gnome, to avoid name conflict.
(gnome-packages): Change first argument from a config object to a the gnome
package used. Rename second argument from package to name. Extract core
logic into...
(gnome-package): ... this.
(gnome-udev-rules, gnome-polkit-settings): Adjust accordingly.
(gnome-desktop-service-type): Likewise.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/desktop.scm (gnome-polkit-settings): Add spice-gtk to the GNOME
packages providing polkit rules.
(package-direct-input-selector): Allow passing a list corresponding to the
dependency tree, so that non-propagated transitive inputs can be specified.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Fixes a regression introduce in 01334a61c7
that would prevent system cross-compilation (with "guix system image
--target=...") due to 'font-gnu-unifont' depending on 'perl-gd', which
currently cannot be cross-compiled.
* gnu/services/base.scm (%default-console-font, kmscon-service-type):
Refer to 'font-gnu-unifont' with 'ungexp-native'.
It has even better language support than LatGrkCyr-8x16 and can show
fancy progress bars.
* gnu/services/base.scm (%default-console-font): Use unifont.
* gnu/services/configuration.scm
(generate-documentation): Format a list of packages by their names.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Deprecates %facebook-host-aliases in favour of using
hosts-service-type service extensions.
* gnu/services/networking.scm
(block-facebook-hosts-service-type): New variable.
(%facebook-host-aliases): Deprecate variable.
* doc/guix.texi: Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/base.scm (<host>): New record type.
(host): New procedure.
(hosts-service-type): New variable.
* doc/guix.texi (Service Reference): Document it.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/packages/jami.scm (libjami) [outputs]: Add a "bin" output.
[arguments]: Add a move-jamid phase.
* gnu/services/telephony.scm
(jami-configuration->command-line-arguments): Refer to the "bin" output of
libjami.
(jami-shepherd-services): Likewise.
This is a followup to commit 5c5f0fc113
* gnu/services/audio.scm (mpd-serialize-list-of-string): Fix serialization procedure.
Signed-off-by: Leo Famulari <leo@famulari.name>
* gnu/services/audio.scm (mympd-service-type): New variable.
* gnu/tests/audio.scm (%test-mympd): New variable.
* doc/guix.texi: Document it.
Signed-off-by: Liliana Marie Prikler <liliana.prikler@gmail.com>
Services should not expect for XDG_RUNTIME_DIR to be set.
Inferring from the past comment, this seemed to resolve an issue when
the service was launched with an _interactive_ user-account,
which tends to have this variable set by the login-manager.
This is not the case for system accounts and setting this variable
results in PulseAudio (launched by the same system user) failing to start
since it attempts to use a nonexistent directory.
Ideally, this service should have a home-service counterpart but the old
behavior can be emulated by setting the environment-variables field to:
(environment-variables
(list
(string-append "XDG_RUNTIME_DIR=/run/user/"
(number->string (passwd:uid (getpwnam "myuser"))))))
* gnu/services/audio.scm
(mpd-configuration)[environment-variables]: New field.
(mpd-shepherd-service)[start]: Use new field.
* doc/guix.texi (Audio Services)[Music Player Daemon]: Document it.
Signed-off-by: Liliana Marie Prikler <liliana.prikler@gmail.com>
* gnu/services/web.scm (<hpcguix-web-configuration>)[specs]: Default to #f.
(hpcguix-web-shepherd-service): Do not pass '--config' when SPECS is #f.
(hpcguix-web-service-type)[default-value]: New field.
* doc/guix.texi (Web Services): Adjust accordingly.
* gnu/services/base.scm (<greetd-terminal-configuration>)[source-profile?]:
New field.
(make-greetd-terminal-configuration-file): Serialize new field to
configuration file.
* doc/guix.texi (Base Services): Document it.
* gnu/services/games.scm (joycond-configuration): New configuration type.
(joycond-shepherd-service): New procedure.
(joycond-service-type): New variable.
* doc/guix.texi (Game Services): Document it.
This fixes a regression from 543d971ed2 whereby
match-lambda due to configuration field reordering.
* gnu/services/security.scm:
[serialize-fail2ban-ignore-cache-configuration]: Switch to match-record.
[serialize-fail2ban-jail-filter-configuration]: Switch to match-record.
[serialize-fail2ban-jail-action-configuration]: Switch to match-record.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/desktop.scm (enlightenment-desktop-service-type): Extend
the enlightenment-desktop-service-type with the udev rules from the
ddcutil input in the udev-service-type.
Fixes <https://issues.guix.gnu.org/60383>.
* gnu/services/sound.scm (pulseaudio-etc): Produce daemon.conf
unconditionally, with the correct default-script-file location. Produce
client.conf unconditionally.
Reported-by: Bruno Victal <mirai@makinata.eu>
* gnu/services/desktop.scm (bluetooth-service): Sync docstring with info,
remove mention to group not really needed to access D-Bus service.
* doc/guix.texi (Desktop Services): Also remove mention to group here.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/ganeti.scm (ganeti-watcher-jobs): Label job as "ganeti-watcher".
(ganeti-cleaner-jobs): Labels jobs as "ganeti master cleaner" and "ganeti node
cleaner".
This provides glyphs for additional fonts such as Amharic that were
otherwise missing.
Fixes <https://issues.guix.gnu.org/60164>.
Reported by Wolf <wolf@wolfsden.cz>.
* gnu/services/base.scm (kmscon-service-type): In 'start' method,
pass #:environment-variables to set 'XDG_DATA_DIRS'.
* gnu/services/ldap.scm (slapd-configuration): Update default value for
run-dir to match defaults of 389-ds-base package.
* doc/guix.texi: Update documentation.
'generic-serialize-alist' refers to (gnu home services version-control)
for usage examples but there's no such module.
* gnu/services/configuration.scm (generic-serialize-alist): Adjust
docstring.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/nix.scm (<nix-configuration>)[build-directory]: New field.
(nix-service-etc, nix-shepherd-service): Take them into account.
* doc/guix.texi (Nix): Update it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Previously the service would keep starting more and more processes.
* gnu/services/guix.scm (guix-build-coordinator-shepherd-services): Fix how
make-forkexec-constructor is called.
This reduces the closure size of systems by removing one glibc
copy--namely (@ (gnu packages base) glibc) in addition to (@ (gnu
packages commencement) glibc-final).
* gnu/services/base.scm (<nscd-configuration>)[glibc]: Change default
value to use 'let-system' and 'canonical-package' as appropriate.
This allows 'match-record' to be more efficient (field offsets are
computed at compilation time) and to report unknown fields at
macro-expansion time.
* guix/records.scm (map-fields): New macro.
(define-record-type*)[rtd-identifier]: New procedure.
Define TYPE as a macro and use a separate identifier for the RTD.
(lookup-field, match-record-inner): New macros.
(match-record): Rewrite in terms of 'match-error-inner'.
* tests/records.scm ("match-record, simple")
("match-record, unknown field"): New tests.
* gnu/services/cuirass.scm (cuirass-shepherd-service): Rename 'log-file'
local variable to 'main-log-file'.
* gnu/services/getmail.scm (serialize-getmail-configuration-file): Move
after <getmail-configuration-file> definition.
Previously, we were passing '-b', thereby starting the server in the
background. Consequently the 'start' method could complete before the
server was ready to accept connections on its socket, leading to
non-deterministic test failures.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
* gnu/services/security.scm (fail2ban-shepherd-service): Change
FAIL2BAN-ACTION to invoke 'fail2ban-client'.
Change 'start' method to use 'make-forkexec-constructor'; start the
server in the foreground with '-f' and pass '-x' to force execution of
the server, as done upstream in 'fail2ban.service.in'.
* gnu/services/security.scm (fail2ban-shepherd-service): Change
FAIL2BAN-ACTION to return an 'invoke' gexp.
Adjust the shepherd 'start' and 'stop' fields accordingly. Have 'stop'
return #f on success.
Fixes <https://issues.guix.gnu.org/59423>.
* gnu/services/configuration.scm (define-configuration-helper): Rename the
accessor of the %location field from "NAME-location" to
"NAME-source-location".
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Reported-by: Pierre Langlois <pierre.langlois@gmx.com>
* gnu/services/vpn.scm (wireguard-activation): Use the "wg" binary from
the package given to <wireguard-configuration>.
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
The service already runs with the specified user and group, so there is no use
in writing it to the configuration files. This change is mainly done for
compatibility with 'zabbix-agent2' which does not understand the User=
setting, but also to document the correct data type for the "group" setting.
* gnu/services/monitoring.scm (serialize-string): Filter USER and GROUP
fields.
(group?, serialize-group): Remove variables.
(zabbix-server-configuration, zabbix-agent-configuration): Document the GROUP
field as 'string'.
* doc/guix.texi (Monitoring Services): Adjust accordingly.
Fixes <https://issues.guix.gnu.org/59423>.
* gnu/services/configuration.scm (define-configuration-helper): Rename the
accessor of the %location field from "NAME-location" to
"NAME-source-location".
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Reported-by: Pierre Langlois <pierre.langlois@gmx.com>
This allows 'match-record' to be more efficient (field offsets are
computed at compilation time) and to report unknown fields at
macro-expansion time.
* guix/records.scm (map-fields): New macro.
(define-record-type*)[rtd-identifier]: New procedure.
Define TYPE as a macro and use a separate identifier for the RTD.
(lookup-field, match-record-inner): New macros.
(match-record): Rewrite in terms of 'match-error-inner'.
* tests/records.scm ("match-record, simple")
("match-record, unknown field"): New tests.
* gnu/services/cuirass.scm (cuirass-shepherd-service): Rename 'log-file'
local variable to 'main-log-file'.
* gnu/services/getmail.scm (serialize-getmail-configuration-file): Move
after <getmail-configuration-file> definition.
* gnu/services/networking.scm (network-manager-configuration)[iwd?]: New
field.
(network-manager-shepherd-service): Add iwd to requirements if needed.
* doc/guix.texi: Add information about iwd? option.
* gnu/services/databases.scm (mysql-install): Run "mariadb-install-db" instead
of a hard coded set of SQL commands.
(mysql-upgrade-wrapper): Explicitly run as mysql user.
* gnu/services/databases.scm (mysql-with-install-lock): Remove variable.
(mysql-start): Rename to ...
(mysqld-wrapper): ... this. Do the preliminary initialization steps and call
out to MYSQL-INSTALL when necessary.
(mysql-install): Only initialize table schemas.
(mysql-install-shepherd-service): Remove.
(mysql-service)[requirement]: Remove 'mysql-install. Add 'user-processes.
[start]: Don't pass #:user and #:group.
(mysql-shepherd-services): Remove MYSQL-INSTALL-SHEPHERD-SERVICE.
* gnu/services/databases.scm (mysql-upgrade-wrapper): Take service
configuration as argument, and pass the config file to mysql_upgrade.
(mysql-upgrade-shepherd-service): Pass CONFIG instead of just socket and
executable to MYSQL-UPGRADE-WRAPPER.
* gnu/services/databases.scm (mysql-configuration): Add datadir property.
* gnu/services/databases.scm (mysql-configuration-file): Replace hard coded
data dir with property from config.
* gnu/services/databases.scm (%mysql-activation): Remove activation, it runs
before PID 1. The data dir may reside on a file system not mounted at this
time.
* gnu/services/databases.scm (mysql-install-shepherd-service): Create service
which replaces the activation. Provide mysql-install.
* gnu/services/databases.scm (mysql-shepherd-service): Move invocation of
mysqld to mysql-start program-file, because the invocation gotten more
complex. Require mysql-install.
* gnu/services/databases.scm (mysql-start): Invoke mysqld only if a lock file
appears.
* gnu/services/databases.scm (mysql-shepherd-services): Prepend the install
service before the normal service.
* gnu/services/databases.scm (mysql-upgrade-wrapper): Increase timeout to
20s to let the mysql install procedure finish.
Signed-off-by: Marius Bakke <marius@gnu.org>
This is a follow-up to commit 9ad311ec15.
* gnu/packages/virtualization.scm: Remove copyright line.
* gnu/services/virtualization.scm: Add copyright line.
Signed-off-by: Christopher Baines <mail@cbaines.net>
* gnu/services/guix.scm (guix-build-coordinator-shepherd-services,
guix-build-coordinator-agent-shepherd-services,
guix-build-coordinator-queue-builds-shepherd-services): Set
%current-logfile-date-format to "".
Signed-off-by: Christopher Baines <mail@cbaines.net>
There's an unwritten policy to not use GOOPS in Guix.
* gnu/services/lightdm.scm (strip-class-name-brackets): Rename to...
(strip-record-type-name-brackets): ... this.
(config->name): Adjust accordingly and use 'record-type-name' instead of
'class-name'.
(list-of-greeter-configurations?): Likewise.
Fixes a regression introduced in
44554e7133 whereby the wrong record fields
would be accessed, leading to a <location> record being spliced in the
result.
* gnu/services/getmail.scm (serialize-getmail-configuration-file): Use
'match-record' instead of 'match'.
(getmail-shepherd-services): Likewise.
The default value for <gitolite-configuration> has "git" for both the values
of the user and the group, as costumary, which means that unless someone uses
a custom configuration and chooses different strings for user and group, this
wouldn't show up.
* gnu/services/version-control.scm (gitolite-accounts): Use the correct
variable for the name of a (user-group ...).
Signed-off-by: Christopher Baines <mail@cbaines.net>
These were spot while working on a fix for commit 543d971ed2 ("services:
configuration: Re-order generated record fields").
* gnu/services/web.scm (php-fpm-accounts): Remove extraneous trailing dummy
catchall patterns.
(agate-accounts): Access the configuration fields directly since there are
only two, which is less error-prone.
Commit 543d971ed2 ("services: configuration: Re-order generated record
fields") introduced two regressions, one in guix home and another one in the
zabbix service.
* gnu/home/services/shells.scm (home-bash-extensions): Remove the first
pattern in the match, which used to be to ignore %location.
* gnu/services/monitoring.scm (zabbix-front-end-nginx-extension): Likewise.
This reverts commit 39e4e00f75, with fixes for
the guix home issues reported and another one found while reconfiguring berlin
in the subsequent commit.
This reverts commit 543d971ed2, and
its dependent commit 9b21cd2e9a, which
appear to have triggered a recent wave of ‘guix home’ regressions
involving (services (list (service home-bash-service-type))):
In gnu/home/services/shells.scm:
504:7 3 (home-bash-extensions #<<home-bash-configuration> package: #<package bash@5.1.8 gnu/packages/ba…> …)
In unknown file:
2 (append #<<location> file: "…" line: 14 column: 12> ())
In ice-9/boot-9.scm:
1685:16 1 (raise-exception _ #:continuable? _)
1685:16 0 (raise-exception _ #:continuable? _)
ice-9/boot-9.scm:1685:16: In procedure raise-exception:
In procedure append: Wrong type argument in position 1 (expecting empty list): #<<location> file: "…" line: 14 column: 12>
I should love to dive in & fix this rather than revert, but urgently
need sleep.
* gnu/services/mcron.scm (list-of-gexps?): New predicate.
(mcron-configuration): Rewrite using define-configuration.
[log?, log-format]: New fields.
(mcron-shepherd-services): Invoke mcron with the --log and --log-format
arguments when log? is #t,
(generate-doc): New procedure.
* doc/guix.texi (Scheduled Job Execution): Update doc.
(Mcron Home Service): Likewise.
* gnu/home/services/mcron.scm: Keep in sync with the above changes to
gnu/services/mcron.scm.
This is so that the first field of the generated record matches the first one
declared, which makes 'define-configuration' record API compatible with
define-record-type* ones.
* gnu/services/configuration.scm (define-configuration-helper): Move the
%location field below the ones declared by the user.
* gnu/services/monitoring.scm (zabbix-front-end-config): Adjust match pattern
accordingly.
This is a follow-up of: fb35b7cedd.
* gnu/services/vpn.scm (wireguard-service-type): Add the wireguard package
from the configuration to the profile.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/services/vpn.scm (wireguard-service-type): Include the
"wireguard-tools" package as an extension to profile-service-type, so
that users that enable the wireguard service can interact with it via
the command-line without having to manually install wireguard-tools.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/services/ganeti.scm (<ganeti-os>)[extension]: Default to #f.
(ganeti-os->directory): Only add extension if set. Support a file-like object
for VARIANTS.
* doc/guix.texi (Virtualization Services): Document this change and add
example. Update Ganeti URLs while at it.
* gnu/services/vpn.scm (<wireguard-configuration>)[pre-up, post-up, pre-down,
post-down, table]: New fields.
(wireguard-configuration-file): Take them into account.
* doc/guix.texi (Wireguard): Update it.
* gnu/services/web.scm (nginx-shepherd-service): Be explicit about the
reload action not changing the configuration file, but instead
respawning worker processes.
Signed-off-by: Christopher Baines <mail@cbaines.net>
* gnu/services/web.scm (nginx-shepherd-service): Use the simpler
"nginx-action" helper, for the same reload side-effect.
Signed-off-by: Christopher Baines <mail@cbaines.net>
These typos were found and reported through weblate.
* gnu/packages/audio.scm (wildmidi)[description]: Fix typo.
* gnu/packages/games.scm (cgoban)[description]: Fix typo.
* gnu/services/version-control.scm (gitolite-service-type)[description]:
Fix typo.
* gnu/installer/newt/substitutes.scm (run-substitutes-page): Remove full
stop at end of title.
* gnu/machine/ssh.scm (machine-ssh-configuration-system): Move
punctuation outside of quotes.
* guix/scripts/home.scm (process-action): Remove trailing space before
newline.
* guix/scripts/system.scm (show-help): Fix typo.
* guix/scripts/environment.scm (with-store/maybe): Fix typo.
In a new "reload" shepherd-action, send a SIGHUP to the NGINX master process,
so that it can re-read the configuration file and start new worker processes.
* gnu/services/web.scm (nginx-shepherd-service): Add the "reload"
shepherd-action.
Signed-off-by: Christopher Baines <mail@cbaines.net>
This is not done for gdm-service-type, so do not do it here either, for
consistency. Perhaps that change had been motivated by the fact that using
ratpoison without a default terminal makes for a poor user experience (one
cannot even view the help screen without a terminal); this was fixed with the
preceding commit.
* gnu/services/xorg.scm (slim-service-type)
[profile-service-type]: Remove extension.
* gnu/services/guix.scm (guix-build-coordinator-agent-configuration-max-allocated-builds):
New procedure.
(guix-build-coordinator-agent-shepherd-services): Use max-allocated-builds.
* doc/guix.texi (Guix Build Coordinator): Document this new field.
This allows the dconf profile directive "system-db:" to look up profiles by
name from under /etc/dconf/db/.
* gnu/services/xorg.scm (dconf-keyfile, dconf-profile): New procedures.
(dconf-profiles?): New predicate.
(dconf-configuration): New procedure.
(dconf-profile->profile-file): Likewise.
(dconf-profile->db-keyfile): Likewise.
(dconf-profile->db-keyfile-dir): Likewise.
(dconf-profile->db): Likewise.
(dconf-profile->files): Likewise.
(dconf-service-type): New service type.
* gnu/services/xorg.scm (<gdm-configuration>)[xdmcp?]: New field.
* gnu/services/xorg.scm (gdm-configuration-file): Use it. Use (ice-9 format)
to serialize boolean.
(gdm-polkit-rules): New variable.
(gdm-service-type): Use it to extend polkit.
* doc/guix.texi (X Window): Document it.
* gnu/services/networking.scm (dhcp-client-configuration): New record
configuration.
(dhcp-client-shepherd-service): Implement a shepher service. Provide a
deprication message for legacy configurations.
(dhcp-client-service-type): Use dhcp-client-shepherd-service.
* doc/guix.texi (Networking Setup): Update.
* po/guix/POTFILES.in: Add 'gnu/services/networking.scm'.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/web.scm (anonip-shepherd-service)[start]: Accept zero
arguments. Define 'spawn'. Print a message and return #f when #$INPUT
does not denote a FIFO.
When trying to run certbot, the mcron command fails, as
/etc/letsencrypt/live is missing. This patch adds it into the certbot
activation service.
* gnu/services/certbot.scm (certbot-activation): Make /etc/letsencrypt/live.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This gets rid of that (in)famous at boot time:
error in finalization thread: Success
This was caused by the file-descriptor closing loop, which would clause
the finalization pipe, leading the finalization thread to (erroneously)
error out.
Thanks to Josselin Poiret for locating the problem!
* gnu/services/shepherd.scm (shepherd-boot-gexp): In 'loop', replace
'close-fdes' with a pair of 'fcntl' calls to add FD_CLOEXEC.
An empty root or index field is an error in nginx.
* gnu/services/web.scm (emit-nginx-server-config): Don't emit root or
index fields when they are empty
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://issues.guix.gnu.org/44944>.
* gnu/services/xorg.scm (%gdm-activation): Delete variable.
(gdm-service-type): De-register it.
* gnu/services/desktop.scm (%gdm-file-system): New variable.
(gdm-file-system-service): Likewise.
(desktop-services-for-system): Use it.
This a followup to 59ee837d8b, which changed the
default value of the HandleLidSwitchExternalPower to the empty string.
Unfortunately this causes elogind to print a warning (although it otherwise
works as intended). This change fixes that.
* gnu/services/desktop.scm (elogind-configuration-file)<handle-action>: Let
the unspecified value go through.
<ini-file-clause>: When an unspecified file is encountered, do not produce any
text to serialize.
Conflicts resolved in:
gnu/local.mk
gnu/packages/cmake.scm
gnu/packages/glib.scm
gnu/packages/gnome.scm
gnu/packages/gtk.scm
gnu/packages/sdl.scm
pango-next, vala-next and librsvg-bootstrap were removed in the process.
Fixes a bug introduced with the Shepherd 0.9.2 upgrade in commit
1ba0e38267 whereby files opened by, say,
the 'start' method of 'urandom-seed', could leak into the execution
environment of some other service--e.g., 'term-tty4'.
* gnu/services/shepherd.scm (shepherd-configuration-file)[config]:
Override 'call-with-input-file' and 'call-with-output-file'.
Reported by zamfofex.
Regression introduced in 2bac6ea177.
* gnu/services/virtualization.scm (secret-service-operating-system):
Add 'inherit' keyword for 'guix-configuration'.
Failing to do that, that file descriptor could be inherited by child
processes as of Shepherd 0.9.2.
* gnu/services/shepherd.scm (shepherd-configuration-file): Open
/dev/null as O_CLOEXEC.
* gnu/services/web.scm (<nginx-configuration>)[shepherd-requirement]:
New field.
(nginx-shepherd-service): Honor it.
* doc/guix.texi (Web Services): Document it.
This is the documented default of UPower 0.99.15 (the actual default
appears to be #f though).
* gnu/services/desktop.scm (<upower-configuration>)
[use-percentage-for-policy?]: Default to #t.
* doc/guix.texi (Desktop Services): Adjust accordingly. Explain the
tradeoff.
These values are those used by default by UPower 0.99.15.
* gnu/services/desktop.scm (<upower-configuration>)[percentage-low]
[percentage-critical]: Increase.
* doc/guix.texi (Desktop Services): Update accordingly.
* gnu/services/security.scm: Wrong condition in string-filter
function in fail2ban-jail-configuration-serialize-field-name.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Fixes https://issues.guix.gnu.org/56444
* gnu/services/version-control.scm (gitolite-activation): Modify permissions
on home directory so that git group has read access.
Reported-by: Evgeny Pisemsky <evgeny@pisemsky.com>
Experienced by David Thompson for years, wondering what was wrong. Thanks for
finding the root cause, Evgeny! :)
* gnu/services/lightdm.scm: New service.
* tests/services/lightdm.scm: Test it.
* doc/guix.texi (X Window): Document it.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register it.
Co-authored-by: L p R n d n <guix@lprndn.info>
Co-authored-by: Ricardo Wurmus <rekado@elephly.net>
* gnu/services/base.scm (<greetd-configuration>)
[greeter-supplementary-groups]: New field.
(%greetd-accounts): Rename to...
(greetd-accounts): ... this. Convert to a function that takes a config
argument. Use greeter-supplementary-groups.
(greetd-service-type): Adjust accordingly.
* gnu/tests/desktop.scm (%minimal-services): Add test for
greeter-supplementary-groups.
* doc/guix.texi ("Base Services")[greetd-service-type]: Document
greeter-supplementary-groups.
* gnu/services/desktop.scm (seatd-group-sanitizer): New variable.
(<seatd-configuration>)[user]: Removed field.
[group]: Changed to "seat". Sanitize via seatd-group-sanitizer.
(seatd-accounts): New variable.
(seatd-environment): Adjust to <seatd-configuration> ABI.
(seatd-service-type)[extensions]: Add account-service-type with seatd-accounts.
* gnu/tests/desktop.scm (run-minimal-desktop-test): Check for correct
ownership of $SEATD_SOCK.
* doc/guix.texi ("Desktop Services")[seatd-service-type]: Mention that users
may need to become members of the "seat" group.
Update default value for group field.
Add explanation on seatd.sock file.
Remove dropped user field.
The new value of %unset-value sticks out more when something goes wrong, and
is also more unique; i.e. easier to search for.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/home/services/ssh.scm (serialize-address-family): Use the public API of
the maybe infrastructure.
* gnu/services/file-sharing.scm (serialize-maybe-string): Use maybe-value.
(serialize-maybe-file-object): Use maybe-value-set?.
* gnu/services/getmail.scm (getmail-retriever-configuration): Don't use
internals in unset field declarations.
(getmail-destination-configuration): Ditto.
* gnu/services/messaging.scm (raw-content?): Use maybe-value-set?.
(prosody-configuration): Use %unset-value.
* gnu/services/telephony.scm (jami-shepherd-services): Use maybe-value-set?.
(archive-name->username): Use maybe-value-set?.
* tests/services/configuration.scm ("maybe type, no default"): Use
%unset-value.
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/configuration.scm (%unset-value): New variable.
(normalize-field-type+def): Use it.
(maybe-value-unset?): Use it.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/configuration.scm (maybe-value-set?): New procedure.
* doc/guix.texi (Complex Configurations): Document it. Remove comment showing
usage of 'maybe-string' with a default value, which doesn't make sense.
Co-authored-by: Attila Lendvai <attila@lendvai.name>
Fixes <https://issues.guix.gnu.org/57052>, which was a behavior change
introduced inadvertently in 4c698cd512.
* gnu/services/desktop.scm (<elogind-configuration>)
[handle-lid-switch-external-power]: Default to *unspecified*, which serializes
to nothing. This matches upstream behavior, meaning that even when plugged to
a power cord, a laptop will suspend when the lid is closed.
* doc/guix.texi (Desktop Services): Update doc.
Reported-by: Cairn <cairn@pm.me>
Fix the check for empty device path. Do not use --daemonize, since that is
handled by make-forkexec-constructor. Drop the --pidfile option which is
unused without --daemonize.
* gnu/services/virtualization.scm (qemu-guest-agent-shepherd-service): Modify
command arguments.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://issues.guix.gnu.org/56799>.
This partially reverts 8cb1a49a39.
Rationale: *unspecified* cannot be serialized thus used as a G-Expression
input, which is problematic/inconvenient when using deeply nested records. As
an example, jami-service-type was broken when using partially defined
<jami-account> records.
* gnu/services/configuration.scm (define-maybe-helper): Check against the
'unset symbol.
(normalize-field-type+def): Adjust value to 'unset.
(define-configuration-helper): Use 'unset as the default value thunk.
* gnu/services/file-sharing.scm (serialize-maybe-string): Check against the
'unset symbol.
(serialize-maybe-file-object): Likewise.
* gnu/services/messaging.scm (define-all-configurations): Use 'unset as
value.
(raw-content?): Check against 'unset symbol.
(prosody-configuration)[http-max-content-size]: Default to 'unset.
[http-external-url]: Likewise.
[mod-muc]: Likewise.
[raw-content]: Likewise.
* gnu/services/networking.scm (opendht-configuration): Adjust documentation.
* gnu/services/telephony.scm (jami-shepherd-services): Replace *undefined*
with the 'unset symbol.
* tests/services/configuration.scm ("maybe type, no default"): Check against
the 'unset symbol.
* doc/guix.texi: Regenerate the opendht-configuration,
openvpn-client-configuration and openvpn-server-configuration documentation.
This is a patch that fixes "<executable name>: this program must be setgid smtpq".
* gnu/services/mail.scm (<opensmtpd-configuration>)[setgid-commands?]: New field.
(opensmtpd-set-gids): New procedure.
(opensmtpd-service-type)[extensions]: Add SETUID-PROGRAM-SERVICE-TYPE extension.
* doc/guix.texi (Mail Services): Document it.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
The default "rotate" value is 1 as of rottlog 0.72.2, meaning that only
one rotated file would be kept in addition to the active file.
* gnu/services/admin.scm (%default-rotations): Add "rotate" option for
%ROTATED-FILES.
The service uses syslog and additionally shepherd 0.9 captures its
stdout/stderr, so there's no point in passing #:log-file.
* gnu/services/networking.scm (tor-shepherd-service): Remove #:log-file
argument to 'make-forkexec-constructor'.
(%tor-log-rotation): Remove.
(tor-service-type): Remove ROTTLOG-SERVICE-TYPE extension.
* gnu/services/networking.scm (tor-configuration->torrc): Remove "User"
and "PidFile".
(tor-shepherd-service): Use 'least-authority-wrapper' and
'make-forkexec-constructor' instead of
'make-forkexec-constructor/container'.
Since revision 32, guix-data-service starts immediately but returns an HTTP
error code until initialization is complete. Adjust the test accordingly, and
remove the increased startup time limit.
* gnu/services/guix.scm (guix-data-service): Use default #:pid-file-timeout.
* gnu/tests/guix.scm (guix-data-service): Retry the http-get test several
times to give the service time to initialize.
Signed-off-by: Christopher Baines <mail@cbaines.net>
The previous approach didn't support a simple alist.
* gnu/services/guix.scm (make-guix-build-coordinator-start-script): Fix
passing parallel-hooks in to the start gexp.
Fixes <https://issues.guix.gnu.org/56327>.
Reported by André Batista <nandre@riseup.net>.
* gnu/services/ssh.scm (openssh-shepherd-service)[ipv6-support?]: New
variable.
Use it in 'start' method.
I'm looking at this as I'd like to use the keepalive functionality.
* gnu/services/web.scm (nginx-upstream-configuration-extra-content): New
procedure.
(emit-nginx-upstream-config): Include the extra-content if applicable.
* doc/guix.texi (NGINX): Document this.
* gnu/services/guix.scm (guix-build-coordinator-configuration-parallel-hooks):
New procedure.
(make-guix-build-coordinator-start-script): Accept and use #:parallel-hooks.
(guix-build-coordinator-shepherd-services): Pass parallel-hooks to
make-guix-build-coordinator-start-script.
* doc/guix.texi (Guix Build Coordinator): Document this new field.
switch-symlinks has been moved to (guix build utils). We need not duplicate it
anymore.
* gnu/services/security-token.scm (pcscd-activation): Use switch-symlinks
from (guix build utils).
Now that configuration records use the 'sanitize' property for each
field, 'validate-configuration' has become useless because it's
impossible to construct an invalid configuration record.
* gnu/services/configuration.scm (validate-configuration): Remove.
* gnu/services/mail.scm (dovecot-service): Remove call.
* gnu/services/vpn.scm (openvpn-client-service)
(openvpn-server-service): Likewise.
* doc/guix.texi (Complex Configurations): Remove documentation.
Previously field type errors would be reported in a non-standard way,
and without any source location information. This fixes it.
* gnu/services/configuration.scm (configuration-field-error): Add a
'loc' parameter and honor it. Use 'formatted-message' instead of plain
'format'.
(define-configuration-helper)[field-sanitizer]: New procedure.
Use it. Use STEM as the identifier of the syntactic constructor of the
record type. Add a 'sanitize' property to each field. Remove now
useless STEM macro that would call 'validate-configuration'.
* gnu/services/mail.scm (serialize-listener-configuration): Adjust to
new 'configuration-field-error' prototype.
* tests/services/configuration.scm ("wrong type for a field"): New test.
* po/guix/POTFILES.in: Add gnu/services/configuration.scm.
Until now the 'stop' method would return #t, which shepherd would
interpret as "services could not be stopped".
* gnu/services/vpn.scm (wireguard-shepherd-service): Have 'stop' return #f.
* gnu/services/desktop.scm (seatd-service-type): New variable
* gnu/services/desktop.scm (seatd-configuration): New data type
Signed-off-by: Lars-Dominik Braun <ldb@leibniz-psychology.org>
* gnu/services/base.scm (greetd-service-type): New variable
* gnu/services/base.scm (greetd-configuration): New data type
* gnu/services/base.scm (greetd-terminal-configuration): New data type
* gnu/services/base.scm (greetd-agreety-session): New data type
* gnu/services/base.scm (pam-limits-service-type): Should be aware of
greetd PAM service
* gnu/services/pam-mount.scm (pam-mount-pam-service): Should be aware
of greetd PAM service
Signed-off-by: Lars-Dominik Braun <ldb@leibniz-psychology.org>
Use *unspecified* as a marker for field values that have not been set.
Rationale: 'disabled may easily clash with user values for boolean fields, is
confusing (i.e. its meaning is *not* boolean false, but unspecified) and it
also passes silently through the symbol? predicate of a field of type symbol.
* gnu/services/configuration.scm (configuration-missing-default-value):
Renamed from configuration-no-default-value.
(define-maybe-helper): Use *unspecified* instead of 'disabled, and make
the default value optional.
* gnu/home/services/desktop.scm (home-redshift-configuration):
Change (maybe-xyz 'disabled) to maybe-xyz.
* gnu/services/authentication.scm (nslcd-configuration): Likewise.
* gnu/services/cgit.scm (repository-cgit-configuration): Likewise.
* gnu/services/file-sharing.scm (serialize-maybe-string)
(serialize-maybe-file-object): Use 'unspecified?' instead of (eq? val
'disabled).
* gnu/services/messaging.scm (raw-content?): Likewise.
(ssl-configuration): Change (maybe-xyz 'disabled) to maybe-xyz.
(prosody-configuration): Likewise.
* gnu/services/file-sharing.scm (transmission-daemon-configuration):
Likewise.
* gnu/services/messaging.scm (define-all-configurations):
Use *unspecified* instead of 'disabled'.
* gnu/services/networking.scm (opendht-configuration): Likewise.
* gnu/services/pm.scm (tlp-configuration): Likewise.
* gnu/services/telephony.scm (jami-account): Likewise.
(jami-configuration): Likewise.
* gnu/services/vpn.scm (openvpn-client-configuration): Likewise.
* tests/services/configuration.scm ("maybe type, no default")
("maybe type, with default"): New tests.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
As opposed to explicitly using 'disabled as value, or using the
(field1 (maybe-number) "") format.
It's mostly the work of Maxime Devos shared under #54674, with some
modifications by Attila Lendvai.
* gnu/services/configuration.scm (normalize-field-type+def): New function.
(define-configuration-helper) (define-configuration): Support new field
format.
* tests/services/configuration.scm (config-with-maybe-number->string): New
function.
("maybe value serialization of the instance"): New test.
("maybe value serialization of the instance, unspecified"): New test.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/dbus.scm (<dbus-configuration>)[verbose?]: New field.
(dbus-shepherd-service): Use it.
(dbus-service)[verbose?]: Add argument and update doc.
* doc/guix.texi (Desktop Services): Document it.
Fixes <https://issues.guix.gnu.org/55707>.
Previously Inetutils' syslogd would call 'fsync' after each line written
to a file. This would significantly increase boot times on machines
with slow-ish spinning HDDs, where each 'fsync' call would take between
0.1s and 0.4s (and we'd do two of them for each line, one for
/var/log/messages and one for /var/log/debug).
* gnu/services/base.scm (%default-syslog.conf): Add a '-' before each
file name, except /var/log/secure. Change what goes to /var/log/debug.
Fixes <https://issues.guix.gnu.org/54783>.
* gnu/services/linux.scm (zram-device-configuration)
[priority]: Adapt to use #f or an integer from 0 to 32767. Add sanitizer to
warn for the change and delay the field.
(zram-device-configuration->udev-string): Adapt as above.
* doc/guix.texi (Zram Device Service): Remove double copyright line.
Change priority description to refer to the Swap Space one, and suggest not
leaving the default #f on to properly use zram.
Reported-by: Stefan Baums <baums@stefanbaums.com>
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami'
and 'jami-provisioning' system tests to pass again.
In version 0.9.0, Shepherd constructors are now run concurrently, via
cooperative scheduling (Guile Fibers). The Jami service previously relied on
blocking sleeps while polling for D-Bus services to become ready after forking
a process; this wouldn't work anymore since while blocking the service process
wouldn't be given the chance to finish starting. The new reliance on Fibers
in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant
that it wouldn't work outside of Shepherd anymore. Finally, the
'start-service' Shepherd procedure used in the test suite would cause the Jami
daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0).
To fix/simplify these problems, this change does the following:
1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify
things, such as avoiding the need to fork 'dbus-send' processes.
2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries'
waiting syntax.
3. A 'dbus' package variant is used to adjust the session bus configuration,
tailoring it for the use case at hand.
4. Avoid start-service in the tests, preferring 'jami-service-available?' for
now.
* gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes)
(deserialize-item, serialize-boolean, dbus-dict->alist)
(dbus-array->list, parse-account-ids, parse-account-details)
(parse-contacts): Delete procedures.
(%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group)
(%send-dbus-debug): Delete parameters.
(jami-service-running?): New procedure.
(send-dbus/configuration-manager): Rename to...
(call-configuration-manager-method): ... this. Turn METHOD into a positional
argument. Turn ARGUMENTS into an optional argument. Invoke
`call-dbus-method' instead of `send-dbus', adjusting callers accordingly.
(get-account-ids, id->account-details, id->account-details)
(id->volatile-account-details, username->id, add-account remove-account)
(username->contacts, remove-contact, add-contact, set-account-details)
(set-all-moderators, username->all-moderators?, username->moderators)
(set-moderator): Adjust accordingly.
(with-retries, send-dbus, dbus-available-services)
(dbus-service-available?): Move to ...
* gnu/build/dbus-service.scm: ... this new module.
(send-dbus): Rewrite to use the Guile AC/D-Bus library.
(%dbus-query-timeout, sleep*): New variables.
(%current-dbus-connection): New parameter.
(initialize-dbus-connection!, argument->signature-type)
(call-dbus-method): New procedures.
(dbus-available-services): Adjust accordingly.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register new module.
* gnu/packages/glib.scm (dbus-for-jami): New variable.
* gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to
dbus-for-jami.
(jami-dbus-session-activation): Write a D-Bus daemon configuration file at
'/var/run/jami/session-local.conf'.
(jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers
as extensions. Adjust imported modules. Remove no longer used parameters.
<jami-dbus-session>: Use a PID file, avoiding the need for the manual
synchronization.
<jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using
'jami-service-available?' instead of 'dbus-service-available?'.
* gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set
DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use
'jami-service-available?' to determine if the service is started rather than
the now problematic Shepherd's 'start-service'.
The guix-data-service system test fails on a slower machine with a one-minute
time limit.
* gnu/services/guix.scm (guix-data-service): Double the #:pid-file-timeout.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/packages/cups.scm (cups-minimal, cups): Update to 2.4.2.
[arguments]: Remove --disable-* #:configure-flags as they do nothing.
Add (different) --without-* ones that do.
Run a newly passing test; skip a newly failing test.
[home-page]: Link to specific subdirectory.
[description]: Better describe the state & direction of the project.
* gnu/services/cups.scm (comma-separated-string-list-or-#f?)
(serialize-comma-separated-string-list-or-#f): New procedures.
(cups-configuration): Update <default-auth-type> and
<browse-dns-sd-sub-types> defaults.
Remove obsolete <classification>, <listen-back-log>, <page-log-format>
and <rip-cache> fields.
Add new <max-subscriptions>, <max-subscriptions-per-job>,
<max-subscriptions-per-printer>, <max-subscriptions-per-user>, and
<ready-paper-sizes> ones.
* doc/guix.texi (Desktop Services): Likewise for their documentation.
* gnu/services/messaging.scm (bitlbee-shepherd-service): In the
'make-inetd-constructor' case, set GUIX_LOCPATH and LC_ALL. In the
'least-authority-wrapper' call, preserve GUIX_LOCPATH and LC_ALL, and
map /run/current-system/locale.
Fixes <https://issues.guix.gnu.org/55444>.
Previously shepherd and dbus-daemon would race to start elogind. In
some cases (for instance if one logs in quickly enough on the tty),
dbus-daemon would "win" and start elogind before shepherd has had a
chance to do it. Consequently, shepherd would fail to start elogind and
mark it as stopped and disabled, in turn preventing services that depend
on it such as 'xorg-server' from starting.
* gnu/services/desktop.scm (elogind-dbus-service): Rewrite to refer to a
wrapper that waits for the 'elogind' Shepherd service.
Fixes a bug introduced in 1f29ed4a81,
whereby 'authorized-key-directory' would end up creating empty files for
authorized keys passed as an extension.
See <https://issues.guix.gnu.org/55359>.
* gnu/services/ssh.scm (extend-openssh-authorized-keys): Call
'alist->vhash' on the alist resulting from the 'append' call.
* gnu/packages/package-management.scm (guix-build-coordinator): Update to
0-53.3de63f1.
* gnu/services/guix.scm (guix-build-coordinator-queue-builds-configuration-guix-data-service-build-server-id):
New procedure.
(guix-build-coordinator-queue-builds-shepherd-services): Use the guix-data-service-build-server-id.
* doc/guix.texi (Guix Build Coordinator): Document the new queue builds
configuration field.
This adds a simple log rotation extension to every networking service that
specifies a #:log-file in its Shepherd service, which should prevent some logs
from accumulating indefinitely.
* gnu/services/networking.scm (%ntp-log-rotation): New variable.
(ntp-service-type): Extend 'rottlog-service-type'.
(openntpd-shepherd-service): Change #:log-file argument to "/var/log/ntpd.log".
(openntpd-service-type): Extend 'rottlog-service-type'.
(%tor-log-rotation): New variable.
(tor-service-type): Extend 'rottlog-service-type'.
(%connman-log-rotation): New variable.
(connman-service-type): Extend 'rottlog-service-type'.
(%hostapd-log-rotation): New variable.
(hostapd-service-type): Extend 'rottlog-service-type'.
(%pagekite-log-rotation): New variable.
(pagekite-service-type): Extend 'rottlog-service-type'.
(%yggdrasil-log-rotation): New variable.
(yggdrasil-service-type): Extend 'rottlog-service-type'.
(%ipfs-log-rotation): New variable.
(ipfs-service-type): Extend 'rottlog-service-type'.
(%keepalived-log-rotation): New variable.
(keepalived-service-type): Extend 'rottlog-service-type'.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://issues.guix.gnu.org/55335>.
Reported by Christopher Baines <mail@cbaines.net>.
* gnu/services/ssh.scm (openssh-shepherd-service)[inetd-style?]: New variable.
<start>: Use it. When using 'make-inetd-constructor', pass a list of
endpoints as is possible with the Shepherd 0.9.1.
<stop>: Adjust accordingly.
* gnu/tests/ssh.scm (run-ssh-test)["wait for port 22"]: Rename to...
["wait for port 22, IPv4"]: ... this.
["wait for port 22, IPv6"]: New test.
Fixes <https://issues.guix.gnu.org/55450>.
Fixes a bug introduced in 211fe3f66e
whereby the inetd-spawned process would run as root (it would still run
in a separate user namespace, with UID 1000 inside of it, but had the
authority of root).
* gnu/services/messaging.scm (bitlbee-shepherd-service): Pass #:user
and #:group to 'make-inetd-constructor'. Remove "-u bitlbee" argument
to BITLBEE*.
Previously, in the absence of extensions of 'pipefs-service-type', we'd
get a wrong-type-arg exception while folding services:
In gnu/services/nfs.scm:
134:37 1 (_ #<<pipefs-configuration> mount-point: "/var/lib/nfs…> …)
In ice-9/boot-9.scm:
1685:16 0 (raise-exception _ #:continuable? _)
In procedure car: Wrong type argument in position 1 (expecting pair): ()
* gnu/services/nfs.scm (pipefs-service-type)[extend]: Gracefully handle
the case where VALUES is the empty list, as done in 'gss-service-type'.
This is a followup to b06ecc5751,
211fe3f66e, and
fd57ce267c.
* gnu/services/base.scm (guix-publish-shepherd-service): Change 'stop'
method to use 'make-systemd-destructor' when 'make-systemd-constructor'
is used.
* gnu/services/dict.scm (dicod-shepherd-service): Change 'stop' method
to use 'make-inetd-destructor' when 'make-inetd-constructor' is used.
* gnu/services/messaging.scm (bitlbee-shepherd-service): Likewise.
Fixes a regression introduced in
211fe3f66e whereby, in inetd mode, and
when using 'bitlbee-purple', libpurple plugins would not be found.
* gnu/services/messaging.scm (bitlbee-shepherd-service): Pass
#:preserved-environment-variables to 'least-authority-wrapper'.
* gnu/services/networking.scm (opendht-configuration->command-line-arguments):
Use 'least-authority-wrapper'.
(opendht-shepherd-service): Use 'make-forkexec-constructor'.
* gnu/services/messaging.scm (bitlbee-shepherd-service): Add call to
'least-authority-wrapper'. In 'start' method, use
'make-inetd-constructor' when available.
* gnu/tests/messaging.scm (run-bitlbee-test)["valid PID"]: Remove test.
* gnu/services/dict.scm (dicod-shepherd-service): Rewrite using
'least-authority-wrapper' plus 'make-forkexec-constructor' instead of
'make-forkexec-constructor/container'.
* gnu/services/databases.scm (postgresql-service-type)[description]: New field.
(memcached-service-type)[description]: New field.
(mysql-service-type)[description]: New field.
(redis-service-type)[description]: New field.
* gnu/services/desktop.scm (geoclue-service-type)[description]: New
field.
(udisks-service-type)[description]: New field.
(elogind-service-type)[description]: New field.
(account-service-type)[description]: New field.
* gnu/services/kerberos.scm (krb5-service-type)[description]: New field.
(pam-krb5-service-type)[description]: New field.
* gnu/services/lirc.scm (lirc-service-type)[description]: New field.
* gnu/services/mail.scm (dovecot-service-type)[description]: New field.
(opensmtpd-service-type)[description]: New field.
(mail-aliases-service-type)[description]: New field.
(exim-service-type)[description]: New field.
* gnu/services/monitoring.scm (zabbix-server-service-type)[description]:
New field.
(zabbix-agent-service-type)[description]: New field.
* gnu/services/nfs.scm (rpcbind-service-type)[description]: New field.
(pipefs-service-type)[description]: New field.
(gss-service-type)[description]: New field.
(idmap-service-type)[description]: New field.
* gnu/services/spice.scm (spice-vdagent-service-type)[description]: New field.
* gnu/services/sysctl.scm (sysctl-service-type)[description]: New field.
* gnu/services/virtualization.scm (libvirt-service-type)[description]:
New field.
(virtlog-service-type)[description]: New field.
* gnu/services/vpn.scm (openvpn-server-service-type)[description]: New field.
(openvpn-client-service-type)[description]: New field.
(wireguard-service-type)[description]: New field.
* gnu/services/web.scm (httpd-service-type)[description]: New field.
(fcgiwrap-service-type)[description]: New field.
(agate-service-type)[description]: New field.
[name]: Fix.
* gnu/services/guix.scm (nar-herder-configuration-log-level): New procedure.
(nar-herder-shepherd-services): Pass the log-level to the nar-herder process.
* doc/guix.texi (Nar Herder): Document configuring the log-level.
Fixes <https://issues.guix.gnu.org/54812>.
Starting with Shepherd 0.9.0 and the use of 'make-inetd-constructor' in
commit 808b9e8504, systems might be
running transient Shepherd services such as those corresponding to SSH
connections. Before this change, 'shepherd-service-upgrade' would have
those transient services in the list of services to unload; concretely,
that would lead all SSH connections to be closed upon 'guix system
reconfigure'.
* gnu/services/shepherd.scm (shepherd-service-upgrade): Remove transient
services to TO-UNLOAD.
* gnu/services/herd.scm (<live-service>)[transient?]: New field.
(current-services): Check the value of 'transient?'. Call
'resolve-transients'.
(resolve-transients): New procedure.
* gnu/services/ssh.scm (openssh-shepherd-service): Use
'make-inetd-constructor' when it is defined.
(<openssh-configuration>)[max-connections]: New field.
* gnu/tests/ssh.scm (run-ssh-test)["sshd PID"]: Adjust to cope with
PID-FILE being #f.
* gnu/tests/ssh.scm (%test-openssh): Pass #f as the 'pid-file'
argument.
* doc/guix.texi (Networking Services): Document 'max-connections'.
* gnu/services/shepherd.scm (scm->go): Define 'shepherd&co' and pass it
to 'with-extensions'.
(shepherd-configuration-file): Call 'start-in-the-background' when it is
defined.
(<shepherd-configuration>)[shepherd]: Default to SHEPHERD-0.9.
* gnu/system.scm (hurd-default-essential-services): Use SHEPHERD-0.8.
* gnu/services/admin.scm (<log-cleanup-configuration>): New record
type.
(log-cleanup-program, log-cleanup-mcron-jobs): New procedures.
(log-cleanup-service-type): New variable.
* doc/guix.texi (Log Rotation): Document it.
Fixes <https://issues.guix.gnu.org/35450>.
This driver isn't intended to be installed by default as it takes
precedence over the recommended xf86-input-libinput.
* gnu/services/xorg.scm (%default-xorg-modules): Remove
xf86-input-synaptics.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/services/telephony.scm (murmur-activation):
(murmur-shepherd-service): Change file name of mumble server, which is
now called mumble-server instead of murmurd since version 1.4.x.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/pm.scm (<thermald-configuration>): Add 'adaptive?' field.
(thermald-shepherd-service): Use it to pass --adaptive to thermald.
* doc/guix.texi (Power Management Services): Document the 'adaptive?' field of
'thermald-configuration'.
This reverts commit 0a9e82b430, which didn't end
up fixing anything. The problem was elsewhere; namely, using
'operating-system-services' instead of 'operating-system-user-services'.
Attempting to use the 'nfs-service-type' as part of a computed
operating-system definition, the following exception would be thrown:
ice-9/boot-9.scm:1685:16: In procedure raise-exception:
ERROR:
1. &ambiguous-target-service-error:
service: #<<service> type: #<service-type rpcbind 7f7529853780> value: #<<rpcbind-configuration> rpcbind: #<package rpcbind@1.2.6 gnu/packages/onc-rpc.scm:87 7f75389e78f0> warm-start?: #t>>
target-type: #<service-type shepherd-root 7f7529396080>
2. &message: "more than one target service of type 'shepherd-root'"
The problem was that the rpcbind shepherd-service object was dynamically
instantiated every time the rpcbind-service-type would be called, causing
multiple objects in some situations, resulting in the above condition.
* gnu/services/nfs.scm (rpcbind-service-type): Refactor and adjust in a way to
extract...
(rpcbind-shepherd-service): ... this new procedure.
The justification about the order of activation snippets given in the
comment had been obsolete since
39e3b4b7ce.
Lately, running the activation snippets for "ssh-keygen -A" and "guix
archive --generate-key" would take a little bit too long, thereby
preventing the childhurd from starting on time.
* gnu/services/virtualization.scm (secret-service-operating-system):
Clear 'generate-host-keys?' and 'generate-substitute-key?'.
* gnu/services/ssh.scm (<openssh-configuration>)[generate-host-keys?]:
New field.
(openssh-activation): Honor it.
* doc/guix.texi (Networking Services): Document it.
* gnu/services/base.scm (<guix-configuration>)[generate-substitute-key?]:
New field.
(guix-activation): Honor it.
* doc/guix.texi (Base Services): Document it.
* gnu/services/sound.scm (pulseaudio-environment)
[PULSE_CONFIG, PULSE_CLIENTCONFIG]: Use fixed locations, and move logic to...
(pulseaudio-etc): ... this service extension. Guard against producing empty
files.
Fixes <https://issues.guix.gnu.org/47681>.
This change adjusts the location of the udev configuration file and rules
directory to a fixed location. Since udev relies on inotify to discover
change to its rules directory (/etc/udev/rules.d), by using a fixed directory
layout, new udev rules can be automatically picked up without restarting the
service.
* gnu/services/base.scm (udev-rules-union): Build rules output directly
in #$output.
(udev-shepherd-service)[start]: Adjust the UDEV_CONFIG_FILE and
EUDEV_RULES_DIRECTORY environment variables.
[actions]: Remove field. The 'rules' action is no longer useful.
(udev.conf): New variable.
(udev-etc): New procedure.
(udev-service-type): Extend the etc-service-type with it.
This is a follow-up to 488f1c589df; the problem had re-appeared on my machine.
* gnu/services/dbus.scm (dbus-configuration-directory): Increase
'auth_timeout' value from 60000 to 300000 ms (5 minutes).
Previously, by accessing the raw <qemu-guest-agent-configuration>
fields, 'qemu' would match the first field, which is the '%location'
field, not the 'qemu' field.
It would seem this bug has always been present since the addition of the
'location' field in d132d9f96b predates
the addition of 'qemu-guest-agent-service-type' in
f634a0baab.
Fixes <https://issues.guix.gnu.org/54041>.
Reported by Ricardo Wurmus <rekado@elephly.net>.
* gnu/services/virtualization.scm (qemu-guest-agent-shepherd-service):
Use accessors for <qemu-guest-agent-configuration>.
This ensures the services does not start before mounts are up.
Reported by rekado on #guix.
* gnu/services/monitoring.scm (zabbix-server-shepherd-service,
zabbix-agent-shepherd-service)[requirement]: New field.
* doc/guix.texi (Monitoring Services): Document the various 'zabbix-*' service
types, and expand description of all Zabbix services. Use less marketing terms.
(Web Services): Add subsubheading for PHP-FPM, and anchors for
cross-referencing.
* gnu/services/monitoring.scm (zabbix-front-end-configuration): Use @ref
instead of @pxref for cross-referencing.
This is a follow-up to 326e08bf0f, et.al.
* gnu/services/monitoring.scm (%zabbix-front-end-nginx-configuration): Rename
to ...
(%zabbix-front-end-configuration-nginx): ... this.
(zabbix-front-end-nginx-extension): Adjust accordingly.
Commit e301f1a8ed removed the NGINX argument
entirely, but users may rely on and override it. Reported by rekado on #guix.
* gnu/services/monitoring.scm (%zabbix-front-end-nginx-configuration): Restore
exported variable.
(zabbix-front-end-nginx-extension): New procedure.
(zabbix-front-end-configuration): Remove FASTCGI-PARAMS field. Restore NGINX
field, but default to the empty list.
(zabbix-front-end-service-type): Extend NGINX-SERVICE-TYPE by
ZABBIX-FRONT-END-NGINX-EXTENSION.
* doc/guix.texi (Monitoring Services): Regenerate documentation.
* gnu/services/guix.scm (<nar-herder-configuration>): Add ttl and negative-ttl
fields.
(nar-herder-shepherd-services): Pass the ttl and negative-ttl values to the
service.
* doc/guix.texi (Guix Services): Document this.
This resolves some warnings with Django 3.2.
This was added by upstream to the base settings
43e5c4a0ac
* gnu/services/web.scm (patchwork-settings-module-compiler): Specify
DEFAULT_AUTO_FIELD in the settings module.
PulseAudio provides udev rules used to adjust the configuration of certain
hardware (e.g., sound cards); ensure they get used.
* gnu/services/sound.scm (pulseaudio-service-type): Extend the
udev-service-type with the pulseaudio package.
This makes it possible to do e.g. (include-files (list (local-file "foo.conf"))).
* gnu/services/monitoring.scm (serialize-field, serialize-list,
serialize-include-files, serialize-extra-options): Rewrite as gexps.
(zabbix-server-config-file, zabbix-agent-config-file): Simplify builders by
using FORMAT.
* gnu/services/monitoring.scm (zabbix-server-runtime-control-procedure,
zabbix-server-actions): New variables.
(zabbix-server-shepherd-service)[actions]: New field. Let-bind variables
common between actions and the start procedure.
This is a follow-up to commit 078f5bfae7.
* gnu/services/monitoring.scm (zabbix-front-end-config): When DB-PASSWORD is
set, enclose the password with quotes in the configuration file.
I noticed that pam_mount mounts work fine when loging into a textual
session, but not when using sddm. This patch fixes this problem by
ensuring that pam_mount.so is included in /etc/pam.d/sddm config file.
* gnu/services/pam-mount.scm (pam-mount-pam-service): Add sddm to the list of
pam services.
Signed-off-by: Guillaume Le Vaillant <glv@posteo.net>
* gnu/services/telephony.scm (jami-configuration)[jamid]: Rename libring to
libjami.
* gnu/services/telephony.scm
(jami-configuration->command-line-arguments): Adjust daemon file name.
* gnu/services/telephony.scm (jami-service-type): Adjust doc.
* gnu/tests/telephony.scm (run-jami-test): Check for 'jamid' process, not
'dring'.
* doc/guix.texi (Telephony Services): Adjust doc for the jami-qt to jami and
libring to libjami packages renaming.
Earlier, the bind-rpc field of <laminar-configuration> was not used at
all. This was a bug.
* gnu/services/ci.scm (laminar-shepherd-service): Use bind-rpc to set
LAMINAR_BIND_RPC environment variable.
* gnu/services/xorg.scm (set-xorg-configuration)[login-manager-service-type]:
Use target-x86-64? from (guix utils) to decide if the system is an x86_64
system instead of comparing the strings ourselves.
Previously, we would get a fishy 127.0.0.1/0 interface:
$ ip a show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 127.0.0.1/0 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
With this change, we get nothing but the "/8" version:
$ ip a show dev lo
1: lo: <LOOPBACK,MULTICAST,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
Reported by Yann Dupont <Yann.Dupont@univ-nantes.fr>.
* gnu/services/base.scm (assert-valid-address): Remove special cases for
127.0.0.1 and ::1.
(%loopback-static-networking): Add "/8".
This is a follow-up to 49599fab56.
Fixes: <https://issues.guix.gnu.org/52908>.
* gnu/services/xorg.scm (set-xorg-configuration)[login-manager-service-type]:
When the current system or target system begins with the string "x86_64", use
gdm-service-type as before; otherwise, use sddm-service-type.
* gnu/system/examples/vm-image.tmpl (services): Add sddm-service-type to the
list of service types to remove.
Fixes: <https://issues.guix.gnu.org/32166>.
* gnu/services/desktop.scm (gnome-packages, gnome-udev-rules): New procedures.
(gnome-polkit-settings): Use the gnome-packages procedure.
(gnome-desktop-service-type): Add an udev service extension.
This avoids issues where the coordinator component dependencies (like sqitch
and guile-fibers) make it harder to use the agent.
* gnu/packages/package-management.scm (guix-build-coordinator/agent-only): New
variable.
* gnu/services/guix.scm (<guix-build-coordinator-agent-configuration>): Use
the guix-build-coordinator/agent-only package by default.
* doc/guix.texi (Guix Services): Update accordingly.
Fixes <https://issues.guix.gnu.org/issue/52051>.
* gnu/services/dbus.scm (dbus-configuration-directory): Set a 60 second
authentication timeout in the D-Bus configuration.
Until now the rsync service would export a single module, named
"files". This allows users to specify as many modules as they want, in
line with rsyncd.conf(5).
* gnu/services/rsync.scm (warn-share-field-deprecation): New procedure.
(<rsync-configuration>)[modules]: New field.
[share-path, share-comment, read-only?, timeout]: Mark as deprecated.
(<rsync-module>): New record type.
(%default-modules): New variable.
(rsync-configuration-modules): New procedure.
(rsync-activation): Create the directory of each module.
(rsync-config-file): Generate configuration for each module.
(rsync-service-type)[description]: New field.
* doc/guix.texi (Networking Services): Adjust documentation. Augment
example.
This makes sure users do not mistakenly configuring a network with "/0"
as its netmask.
* gnu/services/base.scm (assert-valid-address): New procedure.
(<network-address>)[value]: Add it as 'sanitize'.
Bruno Victal
Ludovic Courtès
Andreas Enge
Andrew Tropin
Sergey Trofimov
Felix Lechner
Christopher Baines
Ricardo Wurmus
Maxim Cournoyer
Julien Lepiller
Jelle Licht
Efraim Flashner
Declan Tsien
Zhu Zihao
David Thompson
muradm
Giacomo Leidi
Mathieu Othacehe
jgart
Ivan Vilata i Balaguer
Timo Wilken
Marius Bakke
Florian Pelz
Petr Hodina
EuAndreh
Ellen Papsch
Leo Nikkilä
Tobias Geerinckx-Rice
( via Guix-patches via
Alexey Abramov
Vagrant Cascadian
(
Mája Tomášek
Brice Waegeneire
Simen Endsjø
Simon Streit
Oleg Pykhalov
Hilton Chain
Attila Lendvai
Timotej Lazar
Maya
Lars-Dominik Braun
Arun Isaac
terramorpha
Josselin Poiret
Kiran Shila
ykonai
Liliana Marie Prikler
SeerLite
fesoj000
Remco van 't Veer
Demis Balbach
Cameron Chaparro
Danny Milosavljevic
Guillaume Le Vaillant
Timothy Sample
Nick Zalutskiy
Chris Marusich
Ludovic Courtès
Leo Famulari
Nathan Dehnel