Fixes <https://issues.guix.gnu.org/55806>.
* gnu/system/install.scm (%installation-services): Refactor into a
procedure, so that it can capture the system it's installing for.
Conditionally add uvesafb-service-type based on whether v86d is
supported by the target architecture.
(installation-os)[services]: Use the %installation-service procedure.
(uvesafb-shepherd-service): Remove %host-type checks.
Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>
* gnu/build/image.scm (make-vfat-image): Pass fs-bits as an argument and force
1kb logical sector size only if "ESP" flag is set.
(make-partition-image): Add "fat32" partition type, support explicit "fat16"
type with vfat alias.
* gnu/system/image.scm (partition->dos-type partition): Return file system IDs
for "fat16" and "fat32" partitions.
(partition->gpt-type partition): Ditto.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/build/image.scm (sexp->partition): Add flags support.
* gnu/system/image.scm (partition->gexp): Ditto.
(system-disk-image): Set the genimage bootable flag if it is part of the
partition flags.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
This makes sure warnings like "incompatible bytecode version" don't go
through when looking for (guix store).
* gnu/system/file-systems.scm (%store-prefix): Parameterize
'current-warning-port' around 'resolve-module' call.
Fixes <https://issues.guix.gnu.org/54770>.
Regression introduced in 400c9ed3d7.
Previously, for an encrypted /home (say), "cryptsetup open" would be
invoked by shepherd, with /dev/null as its standard input. It would
thus run in non-interactive mode and, instead of asking for a
passphrase, fail with:
Nothing to read on input.
This change ensures it runs in interactive mode.
* gnu/build/file-systems.scm (system*/console, system*/tty): New
procedures.
* gnu/system/mapped-devices.scm (open-luks-device): Use 'system*/tty'
instead of 'system*'.
* gnu/system/images/novena.scm (novena-barebones-os)[kernel]: Use the
linux-libre-arm-generic kernel.
[initrd-modules]: Do not specify any modules as sdhci-esdhc-imx, ahci_imx and
i2c-dev are built-in in the arm-generic kernel.
This is to make it less surprising, given the common convention sets forth by
the kernel Linux command-line parameters.
* gnu/build/linux-boot.scm (boot-system): Rename '--load', '--repl', '--root'
and '--system' to 'gnu.load', 'gnu.repl', 'root' and 'gnu.system',
respectively. Adjust doc.
(find-long-option): Adjust doc.
* gnu/installer/parted.scm (installer-root-partition-path): Adjust accordingly.
* gnu/system.scm (bootable-kernel-arguments): Add a VERSION argument and
update doc. Use VERSION to conditionally return old style vs new style initrd
arguments.
(%boot-parameters-version): Increment to 1.
(operating-system-boot-parameters): Adjust doc.
(operating-system-boot-parameters-file): Likewise.
* gnu/system/linux-initrd.scm (raw-initrd, base-initrd): Likewise.
* doc/guix.texi: Adjust doc.
* gnu/build/activation.scm (boot-time-system): Adjust accordingly.
* gnu/build/hurd-boot.scm (boot-hurd-system): Likewise.
* gnu/packages/commencement.scm (%final-inputs-riscv64): Adjust comment.
* gnu/packages/patches/linux-pam-unix_chkpwd.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/linux.scm (linux-pam): Use it.
* gnu/system/pam.scm (pam-root-service-type): Add unix_chkpwd to setuid.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
These changes broke the creation of the 'linux-modules-database' for all kernel
series besides 5.15, 5.4, and 5.10, like this:
------
gnu/build/linux-modules.scm:257:5: kernel module not found "framebuffer_coreboot" "/gnu/store/yff45fr6q93mw44zdql9ffr95zcvwxcn-linux-libre-4.9.299/lib/modules"
------
We should support the coreboot framebuffer, but we need to test that change more
completely before deploying it.
This effectively reverts the following commits:
1dfe8c3721 "gnu: linux-libre: Build simplefb into all x86{,_64} kernels."
bc09e7ab56 "gnu: linux-libre: Support the Coreboot framebuffer."
Fixes <https://issues.guix.gnu.org/52667> "System reconfiguration fails to build
linux-modules.drv".
This is a follow-up to 49599fab56.
Fixes: <https://issues.guix.gnu.org/52908>.
* gnu/services/xorg.scm (set-xorg-configuration)[login-manager-service-type]:
When the current system or target system begins with the string "x86_64", use
gdm-service-type as before; otherwise, use sddm-service-type.
* gnu/system/examples/vm-image.tmpl (services): Add sddm-service-type to the
list of service types to remove.
* gnu/system/examples/desktop.tmpl: Only use gnome-desktop-service-type and
the default login manager in set-xorg-configuration when the target system is
x86_64.
Fixes <https://issues.guix.gnu.org/52539>.
Reported by Jacob First <jacob.first@member.fsf.org>.
* gnu/build/accounts.scm (allocate-passwd): Add comment as to why
'real-name' is taken from PREVIOUS. Add (not system?) to the
condition.
* gnu/system.scm (operating-system-etc-service) <login.defs>: Add
"CHFN_RESTRICT".
* gnu/system.scm (%setuid-programs): Add "chfn".
* gnu/system/pam.scm (base-pam-services): Add "chfn".
* doc/guix.texi (User Accounts): Document it.
This attempts to mitigate <https://issues.guix.gnu.org/52667>.
It makes linux-libre@5.15 consistent with older versions which do not
support a modular simplefb, allowing a single %base-initrd-modules
simple list for all of them.
Unlike CONFIG_FB_SIMPLE=m, CONFIG_FB_SIMPLE=y conflicts with
CONFIG_DRM_SIMPLEDRM, so the latter is now disabled. Let us hope it is
not missed.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Unset CONFIG_DRM_SIMPLEDRM to build in CONFIG_FB_SIMPLE=y.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Remove "simplefb".
This code duplicates the (gnu system image) and (gnu build image) code. Using
VM for image generation is not needed, not portable and really slow. Remove
all the VM image generation code to make sure that only the image API is used.
* gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ...
* gnu/build/marionette.scm: ... here.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it.
* tests/modules.scm: Ditto.
* gnu/tests/install.scm: Ditto.
* gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm,
qemu-img, system-qemu-image/shared-store and system-docker-image procedures.
* doc/guix.texi (G-Expressions): Adapt it.
Also add a volatile? argument to the virtual-machine record. When volatile? is
true generate a QEMU script that mounts an overlay on top of a read only
storage. When volatile? is false, use a persistent, read-write storage.
* gnu/system/vm.scm (common-qemu-options): Add a rw-image? argument to use a
persistent storage.
(system-qemu-image/shared-store-script): Add a volatile? argument and honor
it. Use the image API to build the QEMU image.
(<virtual-machine>)[volatile?]: New field.
(virtual-machine-compiler): Pass the volatile? argument to the
system-qemu-image/shared-store-script procedure.
Without this, the kernel cannot write to the display until the
full-featured driver module (often i915) is loaded from the root file
system.
If the root file system is encrypted, the initrd's passphrase prompt
won't make it to the screen, and the fully responsive system will appear
frozen whilst waiting for user input.
* gnu/packages/aux-files/linux-libre/4.4-i686.conf,
gnu/packages/aux-files/linux-libre/4.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Mark simple framebuffers as generic system ones and enable ‘Google’
firmware drivers to enable Coreboot table support and its dependent
framebuffer driver module.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Add the framebuffer_coreboot and simplefb modules on x86 systems.
* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (%qemu-static-networking): New variable.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
* gnu/system/vm.scm (common-qemu-options): Remove the "-vga std" argument that
is the default since QEMU 2.2.
Suggested-by: Attila Lendvai <attila@lendvai.name>
It configures QEMU to use the tty it was started in for IO (as opposed to
opening a separate graphical window). This enables copy-pasting and
scrollback. Exit QEMU with C-a x.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Also add the
'-nographic' QEMU argument when called with #:graphic? #false.
* guix/scripts/system.scm (system-derivation-for-action): Propagate
the #:graphic? keyword arg.
(perform-action): Add and propagate the #:graphic? keyword arg.
(show-help): Add --no-graphic CLI arg.
(%options): Process the new --no-graphic CLI arg.
(process-action): Feed in the CLI arg through the #:graphic? keyword arg.
* doc/guix.texi (Invoking guix system): Add example to combine guix system and
invoking the vm start script into one command. Split the description of the
various options into separate paragraphs. Add a paragraph to describe
--no-graphic.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
'qemu-minimal' is enough for system tests, which is the main (only?) use
of <virtual-machine>.
* gnu/system/vm.scm (<virtual-machine>)[qemu]: Default to QEMU-MINIMAL.
Fixes <https://issues.guix.gnu.org/51425>.
Reported by Jonathan Brielmaier <jonathan.brielmaier@web.de>.
* gnu/system/file-systems.scm (invalid-file-system-flags)
(%validate-file-system-flags): New procedures.
(validate-file-system-flags): New macro.
(<file-system>)[flags]: Add 'sanitize' property.
Fixes regression introduced in d5073fd113,
whereby childhurd dependencies such as 'hurd' would erroneously be
attempted to build natively on x86_64-linux.
* gnu/system/images/hurd.scm (hurd-disk-image)[platform]: New field.
Let this be a warning against—even cautiously and deliberately—using
double negatives. You shall stare, but you shall not see.
* gnu/system/file-systems.scm (<file-system>): Fix the default
skip-check-if-clean? value to match the documentation and the intention.
It was never guaranteed to be run for non-root file systems. It was for
root file systems only due to a bug now fixed.
* gnu/build/file-systems.scm (check-btrfs-file-system): Don't invoke
‘btrfs device scan’ here.
* gnu/system/linux-initrd.scm (raw-initrd): Do so here if any btrfs file
systems are present.
* gnu/build/file-systems.scm (check-ext2-file-system)
(check-bcachefs-file-system, check-btrfs-file-system)
(check-fat-file-system, check-jfs-file-system, check-f2fs-file-system)
(check-ntfs-file-system, check-file-system): Take and honour new FORCE?
and REPAIR arguments. Update the docstring. Adjust all callers.
* gnu/system/file-systems.scm <file-system>: Add new SKIP-CHECK-IF-CLEAN?
and REPAIR fields.
(file-system->spec, spec->file-system): Adjust accordingly.
* gnu/build/linux-boot.scm (mount-root-file-system): Take new
SKIP-CHECK-IF-CLEAN? and REPAIR keyword arguments. Thread them through
to CHECK-FILE-SYSTEM.
* doc/guix.texi (File Systems): Document both new <file-system> options.
* gnu/system/pam.scm (unix-pam-service): Add account and session PAM entries
for pam-gnupg. Don't pass "#f" to "allow-root?" argument, because "lambda*"
already does this by default.
* doc/guix.texi (X Window): Document this.
* gnu/services/xorg.scm (<slim-configuration>)[gnupg?]: New record field.
(slim-pam-service): Pass "#:gnupg?" argument to "unix-pam-service".
This is a followup to a7ac19851b.
* gnu/system/install.scm (installation-os)[setuid-programs]: Use
'setuid-program'.
* gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'.
Thanks to Guillem Jover <guillem@debian.org> on the OFTC's #debian-dpkg
channel for helping with troubleshooting.
Letting GNU Tar recursively walk the complete files hierarchy side-steps the
risks associated with providing a list of file names:
1. Duplicated files in the archive (recorded as hard links by GNU Tar)
2. Missing parent directories.
The above would cause dpkg to malfunction, for example by aborting early and
skipping triggers when there were missing parent directories.
* guix/scripts/pack.scm (self-contained-tarball/builder): Do not call
POPULATE-SINGLE-PROFILE-DIRECTORY, which creates extraneous files such as
/root. Instead, call POPULATE-STORE and INSTALL-DATABASE-AND-GC-ROOTS
individually to more precisely generate the file system. Replace the list of
files by the current directory, "." and streamline the way options are passed.
* gnu/system/file-systems.scm (reduce-directories): Remove procedure.
* tests/file-systems.scm ("reduce-directories"): Remove test.
Tar translate duplicate files in the archive into hard links. These can cause
problems, as not every tool support them; for example dpkg doesn't.
* gnu/system/file-systems.scm (reduce-directories): New procedure.
(file-prefix?): Lift the restriction on file prefix. The procedure can be
useful for comparing relative file names. Adjust doc.
(file-name-depth): New procedure, extracted from ...
(btrfs-store-subvolume-file-name): ... here.
* guix/scripts/pack.scm (self-contained-tarball/builder): Use
reduce-directories.
* tests/file-systems.scm ("reduce-directories"): New test.
Inspired by
1270b2e209.
The price to pay is about 5% of a CPU core usage in the guest in the worst
scenario.
* gnu/system/examples/vm-image.tmpl
(auto-update-resolution-crutch): New mcron job.
[services]: Extend the mcron-service with it.
Having 2.29 is most likely no longer justified. Removing it reduces the
closure size returned by:
guix size $(guix system build gnu/system/install.scm)
from 1.6G to 1.5G.
* gnu/system/locale.scm (%default-locale-libcs): Remove GLIBC-2.29.
Fixes <https://issues.guix.gnu.org/47225>.
* gnu/system/vm.scm (%default-msize-value): New variable.
(%linux-vm-file-systems): Use it as the value of the msize option.
(mapping->file-system): Likewise.
Reported-by: Leo Famulari <leo@famulari.name>
Some services require networking, I'm looking at the Guix Build Coordinator
agent. Networking seems to work in the childhurd VM, so I think this change
makes sense.
* gnu/system/hurd.scm (%base-services/hurd): Add 'networking to the provision
parameter for the static-networking service.
Remove the 'vm-image' command that has been superseded by the 'image'
command.
* gnu/system/vm.scm (system-qemu-image): Remove it.
* guix/scripts/system.scm (system-derivation-for-action): Mark 'vm-image'
command as deprecated and use the image API to produce the VM image.
(perform-action, show-help): Adapt accordingly.
* tests/guix-system.sh: Ditto.
* doc/guix.texi (Invoking guix system,
Running Guix in a VM): Ditto.
* etc/completion/fish/guix.fish: Ditto.
* etc/completion/zsh/_guix: Ditto.
* gnu/system/shadow.scm (account-activation): Delete duplicate (eq?) users
and groups before transforming them to specs and asserting, that names are
unique.
The change from formatted message causes the line to no longer automatically
be ended. This will need to be reverted once again, when duplicate names
become hard errors.
* gnu/system/shadow.scm (assert-unique-account-names)
(assert-unique-group-names): End format strings in ~%.
This reverts commit a3002104a8, which
breaks certain system configurations like:
$ guix system reconfigure config.scm
guix system: error: the following groups appear more than once: lp
*gnu/system/shadow.scm (find-duplicates): New variable.
(assert-unique-account-names, assert-unique-group-names): New variables.
(account-activation): Use them here.
Until now deduplication was performed as an additional pass after
copying files, which involve re-traversing all the files that had just
been copied.
* guix/store/deduplication.scm (copy-file/deduplicate): New procedure.
* tests/store-deduplication.scm ("copy-file/deduplicate"): New test.
* guix/build/store-copy.scm (populate-store): Add #:deduplicate?
parameter and honor it.
* tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f
to 'populate-store'.
* gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate?
to 'populate-store'. Pass #:deduplicate? #f to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
* gnu/build/install.scm (populate-single-profile-directory): Pass
#:deduplicate? #f to 'populate-store'.
* gnu/build/linux-initrd.scm (build-initrd): Likewise.
* guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New
procedure.
[build]: Pass it as an argument to 'source-module-closure'.
* guix/scripts/pack.scm (squashfs-image)[build]: Wrap in
'with-extensions'.
* gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New
procedure.
[builder]: Pass it to 'source-module-closure'.
* gnu/system/install.scm (cow-store-service-type)[import-module?]: New
procedure. Pass it to 'source-module-closure'.
* gnu/system/linux-initrd.scm (file-system-packages): Add
bcachefs-tools/static.
(file-system-type-modules): Add an entry for the "bcachefs" type and
module.
When the image type is "raw" or derived from it (such as "qcow2"), an ESP
partition and file system is already added by the image generator. If a
conflicting user-provided EFI file system is provided, it causes the boot to
fail, as happens for the lightweight-desktop.tmpl and desktop.tmpl templates
under gnu/system/examples.
* gnu/system/image.scm (operating-system-for-image): Remove file systems whose
mount point is "/boot/efi".
Fixes <https://bugs.gnu.org/44511>.
Reported by Maxim Cournoyer <maxim.cournoyer@gmail.com>.
* gnu/system/vm.scm (system-qemu-image): Add 'bootloader' field to OS.
* gnu/system/vm.scm (system-qemu-image)[file-systems-to-keep]: Check
whether SOURCE is a string before calling 'string-prefix?'. Remove
UUIDs and file system labels as well.
This builds are extremely I/O-intensive so they'd rather not run on the
head node of the build farm.
* gnu/system/image.scm (system-disk-image, system-iso9660-image): Pass
#:local-build? #f.
* gnu/system/image.scm (arm32-disk-image, arm32-image-type): New variables.
(arm64-disk-image): Inherit from arm32-disk-image.
(arm64-image-type): Change name to 'arm64-raw.
* gnu/build/vm.scm (load-in-linux-vm): Rename the RNG.
* gnu/system/vm.scm (common-qemu-options): Likewise.
(system-docker-image): Rename the ROOT-DIRECTORY.
* gnu/packages/crypto.scm (eschalot)[arguments]: Use a different
arbitrary string.
* gnu/packages/wicd.scm (wicd)[arguments]: Remove unused configure flag.
* gnu/packages/xorg.scm (xorg-server): Set a more accurate OS vendor.
* gnu/system/images/pine64.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
* gnu/system/image.scm (arm64-disk-image, arm64-image-type): New variables.
This is a follow-up of f19cf27c2b. The
bootloader installation must be done on the final disk-image, hence using
"disk-image-installer" instead of "installer" callback.
* gnu/bootloader/u-boot.scm: Turn all installer callbacks into
disk-image-installer callbacks.
* gnu/build/bootloader.scm (write-file-on-device): Open the output file with
'no-truncate and 'no-create options.
* gnu/system/image.scm (with-imported-modules*): Add (gnu build bootloader)
module.
* gnu/system/linux-container.scm (%nscd-container-caches): New variable.
(containerized-operating-system): Instantiate nscd-service with smaller caches
and add it to the generated operating-system, replacing any nscd-service
specified by the caller.
* gnu/system/file-systems.scm: (%network-file-mappings): Remove "/var/run/nscd".
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/system/image.scm (image-with-os): New macro. Rename the old
"image-with-os" procedure to ...
(image-with-os*): ... this new procedure,
(system-image): adapt according,
(raw-image-type, iso-image-type, uncompressed-iso-image-type
%image-types): new variables,
(lookup-image-type-by-name): new procedure.
(find-image): remove it.
* gnu/system/images/hurd.scm (hurd-image-type): New variable,
use it to define ...
(hurd-disk-image): ... this variable, using "os->image" procedure.
* gnu/tests/install.scm (run-install): Rename
installation-disk-image-file-system-type parameter to installation-image-type,
use os->config instead of find-image to compute the image passed to system-image,
(%test-iso-image-installer) adapt accordingly,
(guided-installation-test): ditto.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/build/image.scm (convert-disk-image): New procedure.
(genimage): Remove target argument.
* gnu/system/image.scm (system-disk-image): Add support for 'compressed-qcow2
image format. Call "convert-disk-image" to apply image conversions on the
final image. Add "qemu-minimal" to the build inputs.
(system-image): Also add support for 'compressed-qcow2.
Move the cow-store procedure from the service declaration in (gnu system
install) to (gnu build install), so that it can be called from within a
different context than Shepherd.
* gnu/build/install.scm (mount-cow-store, unmount-cow-store): New procedures.
* gnu/system/install.scm (make-cow-store): Remove it,
(cow-store-service-type): adapt it accordingly.
* guix/scripts/system.scm (%options): Add `--label'.
(system-derivation-for-action): Take a #:label key to set volume ID.
(perform-action): Take a #:label key.
(%default-options): Add default label value.
(process-action): Pass label value from command-line to perform-action.
* gnu/system/image.scm (image-with-label): New procedure.
Only use the current glibc, as adding glibc-2.29 for compatibility adds
~100MiB to the barebones system closure.
* gnu/system/locale.scm (%default-locale-libcs): Remove glibc-2.29.
Image files can be very large (multiple gigabytes), and the process of
generating them is primarily I/O bound. As disk access is typically faster
than network access, it makes sense build them locally.
* gnu/system/image.scm (system-disk-image): Pass the #:local-build? #t
parameter to computed-file calls dealing with generating image files.
(system-iso9660-image): Likewise.
This is a follow-up of 755f365b02.
As (zlib) is autoloaded in (gnu build linux-modules), "guile-zlib" is needed
as an extension only when it is effectively used.
* gnu/installer.scm (installer-program): Remove "guile-zlib" from the extensions.
* gnu/machine/ssh.scm (machine-check-initrd-modules): Ditto.
* gnu/services.scm (activation-script): Ditto.
* gnu/services/base.scm (default-serial-port): Ditto,
(agetty-shepherd-service): ditto,
(udev-service-type): ditto.
* gnu/system/image.scm (gcrypt-sqlite3&co): Ditto.
* gnu/system/shadow.scm (account-shepherd-service): Ditto.
This commit adds support for GZIP compression for linux-libre kernel
modules. The initrd modules are kept uncompressed as the initrd is already
compressed as a whole.
The linux-libre kernel also supports XZ compression, but as Guix does not have
any available bindings for now, and the compression time is far more
significant, GZIP seems to be a better option.
* gnu/build/linux-modules.scm (modinfo-section-contents): Use
'call-with-gzip-input-port' to read from a module file using '.gz' extension,
(strip-extension): new procedure,
(dot-ko): adapt to support compression,
(ensure-dot-ko): ditto,
(file-name->module-name): ditto,
(find-module-file): ditto,
(load-linux-module*): ditto,
(module-name->file-name/guess): ditto,
(module-name-lookup): ditto,
(write-module-name-database): ditto,
(write-module-alias-database): ditto,
(write-module-device-database): ditto.
* gnu/installer.scm (installer-program): Add "guile-zlib" to the extensions.
* gnu/machine/ssh.scm (machine-check-initrd-modules): Ditto.
* gnu/services.scm (activation-script): Ditto.
* gnu/services/base.scm (default-serial-port): Ditto,
(agetty-shepherd-service): ditto,
(udev-service-type): ditto.
* gnu/system/image.scm (gcrypt-sqlite3&co): Ditto.
* gnu/system/linux-initrd.scm (flat-linux-module-directory): Add "guile-zlib"
to the extensions and make sure that the initrd only contains
uncompressed module files.
* gnu/system/shadow.scm (account-shepherd-service): Add "guile-zlib" to the
extensions.
* guix/profiles.scm (linux-module-database): Ditto.
Instead of hard coding the debug directory to that of the user profile, use
Guile scripting in combination with a new search path specification on GDB to
specify the debug file directories.
* gnu/packages/gdb.scm (gdb-9.1): Add a search path specification for the
GDB_DEBUG_FILE_DIRECTORY environment variable.
* gnu/system/shadow.scm (default-skeletons)[gdbinit]: Derive the value of
DEBUG-FILE-DIRECTORY via the GDB_DEBUG_FILE_DIRECTORY environment variable.
* doc/guix.texi (Installing Debugging Files): Document it.
Tools such as efibootmgr rely on the deprecated /sys/firmware/efi/vars API as
well as on the new /sys/firmware/efi/efivars API. The latter needs to be
mounted.
Reported by Keyhenge here:
https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00274.html
Here is the efivarfs documentation:
https://www.kernel.org/doc/Documentation/filesystems/efivarfs.txt.
* gnu/system/file-systems.scm (%efivars-file-system): New exported variable,
(%base-file-systems): add it.
* gnu/system/install.scm (%efivars-file-system): Add it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/system/file-systems.scm (<file-system>): Add a mount-may-fail? field.
(file-system->spec): adapt accordingly,
(spec->file-system): ditto.
* gnu/build/file-systems.scm (mount-file-system): If 'system-error is raised
and mount-may-fail? is true, ignore it. Otherwise, re-raise the exception.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
This allows users to specify network interface settings with 'guix system vm'
without having to create a new NIC. Fixes <https://bugs.gnu.org/42252>.
Reported by Christopher Lemmer Webber <cwebber@dustycloud.org>.
This reverts commit 5379392731.
This fixes <https://bugs.gnu.org/42151>.
* gnu/system/images/hurd.scm (hurd-initialize-root-partition): Use #:wal-mode #f
in call to ...
* gnu/build/image.scm (initialize-root-partition): ... this, add #:wal-mode?
parameter, pass it to ...
(register-closure): ... this, add #:wal-mode? parameter, pass it to ...
* guix/store/database.scm (with-database): ... this, add #:wal-mode?
parameter, pass it to ...
(call-with-database): ... this, add #:wal-mode? parameter; when
set to #f, do not set journal_model=WAL.
This is a follow-up to commit b904b59ce5.
* gnu/system/image.scm (hurd-initialize-root-partition): Move to ...
* gnu/system/images/hurd.scm (hurd-initialize-root-partition): ... here.
(hurd-disk-image): Use it.
This is a follow-up to commit b904b59ce5.
* gnu/system/images/hurd.scm (hurd-disk-image): Add file-system-options to
create an ext2 file-system that is compatible with the Hurd.
These issues were reported by -Wformat, though they were harmless in
practice because importing (ice-9 format) changes the global 'format'
binding currently.
* gnu/services/nix.scm: Import (ice-9 format).
* gnu/services/web.scm: Likewise.
* gnu/system/mapped-devices.scm: Likewise.
ISO9660 image compression was temporarily disabled to speed-up tests of the
new image API. Enable it again.
* gnu/system/image.scm (iso9660-image)[compression]: Enable it.
This moves hurd-disk-image to a dedicated file. It also defines a default
operating-system so that the image can be built standalone.
* gnu/system/images/hurd.scm: New file,
* gnu/local.mk (GNU_SYSTEM_MODULES): add it,
* gnu/system/image.scm (root-offset, root-label): Export it,
(hurd-disk-image): remove it as this is now defined in the new, Hurd dedicated
file above,
(find-image): adapt to avoid loop dependency.
Since c29bb909d2, fakeroot "sed" and "coreutils"
dependencies are now explicit.
* gnu/system/image.scm (system-disk-image): Remove "sed" and "coreutils" from
inputs.
The "image-root" derivation output is used as a temporary directory that is
passed to mke2fs and mkdosfs later on. By merging the creation of this
directory and the production of partition images, we can get rid of the
derivation.
As mke2fs and mkdosfs are not able to override file permissions, call those
commands with fakeroot. This way, all the image files will be owned by root,
even if image generation is done in an unprivilegded context.
* gnu/system/image.scm (system-disk-image): Merge "image-root" and
"iso9660-image" derivations so that we spare an extra derivation. Also add
"fakeroot" and its runtime dependencies to the inputs.
* gnu/build/image.scm (make-ext-image, make-vfat-image): Make sure that mke2fs
and mkdosfs are respectively called by fakeroot.
The "image-root" derivation output is used as a temporary directory that is
passed to GNU Xorriso later on. By merging the creation of this directory and
the production of an ISO image, we can get rid of the derivation.
* gnu/system/image.scm (system-iso9660-image): Merge "image-root" and
"iso9660-image" derivations so that we spare an extra derivation.
* gnu/image.scm (<image>)[target]: New field,
(image-target): new public method.
* gnu/system/image.scm (hurd-disk-image): Set "i586-pc-gnu" as image 'target'
field,
(maybe-with-target): new procedure,
(system-image): honor image 'target' field using the above procedure.
The initial
guix build -f gnu/system/hurd.scm
hack has been superseded by regular guix system (cross) build.
* gnu/system/hurd.scm (compile-manifest, cross-hurd-image): Remove.
* gnu/system/hurd.scm (%hurd-def%hurd-default-operating-system-kernel,
%hurd-default-operating-system): New exported variables.
* gnu/system/examples/bare-hurd.tmpl: New file.
* Makefile.am (EXAMPLES): Add it.
* tests/guix-system.sh: Add --target=i586-pc-gnu when testing it.
Ludovic Courtès
Josselin Poiret
Maxim Cournoyer
Pavel Shlyak
Efraim Flashner
Mathieu Othacehe
Andrew Tropin
Leo Famulari
Chris Marusich
Ricardo Wurmus
Tobias Geerinckx-Rice
Denis 'GNUtoo' Carikli
Tobias Geerinckx-Rice via Guix-patches via
Attila Lendvai
Ryan Sundberg
Marius Bakke
Christopher Lemmer Webber
Oleg Pykhalov
Christopher Baines
Caliph Nomble
Leo Prikler
Jonathan Brielmaier
Danny Milosavljevic
Mikhail Tsykalov
raingloom
Jan (janneke) Nieuwenhuizen
Florian Pelz
Jason Conroy
Mathieu Othacehe
Julien Lepiller
Royce Strange