Those tests were racy: it could take a while for those files to appear
and for the shepherd service to be up. Thus, wait a little longer for
each of them.
* gnu/tests/networking.scm (run-dhcpd-test)["pid file exists"]
["lease file exists"]: Use 'wait-for-file'.
["dhcpd is alive"]: Use 'wait-for-service'.
This would break "make as-derivation" because /etc/services is
unavailable in the build environment:
[ 38/ 80] loading... 95.0% of 40 filesBacktrace:
In guix/build/compile.scm:
249:8 19 (compile-files "." "/gnu/store/s5nadqd6hkzivkxp33svwqslfn608ng5-guix-system-tests" ("gnu/tests/audio.scm" "gnu/tests/base.scm" "gnu/tests/ci.scm" "gnu/tests/cups.scm" "gnu/tests/d…" …) …)
[…]
In unknown file:
0 (getserv "discard" "tcp")
ERROR: In procedure getserv:
In procedure getserv: no such service discard
builder for `/gnu/store/…-guix-system-tests.drv' failed with exit code 1
* gnu/tests/vnstat.scm (run-vnstat-test): Hard-code 'guest-port' instead
of calling 'getservbyname'.
Checking for "br0" should only be done once the
'openvswitch-configuration' service is up because it's the one that sets
it up.
* gnu/tests/networking.scm (run-openvswitch-test)["openvswitch-configuration
is running"]: New test.
This missing imports became apparent with commit
a09c7da8f8, which runs the marionette
service in a fresh Guile process with fewer imports.
* gnu/tests/databases.scm (run-postgresql-test, run-timescaledb-test)
(run-mysql-test): Add missing module imports for code passed to
'marionette-eval'.
* gnu/tests/docker.scm (run-docker-test, run-docker-system-test): Likewise.
* gnu/tests/mail.scm (run-dovecot-test, run-getmail-test): Likewise.
* gnu/tests/monitoring.scm (run-zabbix-server-test): Likewise.
* gnu/tests/pam.scm (run-test-pam-limits): Likewise.
* gnu/tests/reconfigure.scm (run-switch-to-system-test)
(run-install-bootloader-test): Likewise.
* gnu/tests/security-token.scm (run-pcscd-test): Likewise.
* gnu/tests/install.scm (gui-test-program): Likewise.
* gnu/tests/telephony.scm (run-jami-test): Add modules to
the #:imported-modules argument of 'marionette-operating-system'.
[test]: Remove them from 'with-imported-modules'; remove
'with-extensions'. Add "d-bus tooling loaded" test to set up %load-path
and %load-compiled-path so the marionette process can find
guile-ac-d-bus and guile-packrat.
The previous code worked "by chance": 'start' from (shepherd service)
happened to be in scope because the marionette REPL is created by a mere
'primitive-fork', and 'start' happened to kinda work.
* gnu/tests/base.scm (run-basic-test): Use 'start-service' from (gnu
services herd), not 'start' from (shepherd service), which is not
supposed to work.
* gnu/tests/install.scm (run-install): Likewise.
* gnu/packages/databases.scm (mariadb): Update to 10.9.3.
[source](snippet): Remove adjustments for deprecated TokuDB.
[arguments]: Remove obsolete #:configure-flags. Build with system libfmt.
Adjust tests for 10.10.2, and mariadb_config file name. Remove patch phase.
[native-inputs]: Remove obsolete patch.
[inputs]: Add FMT. Change from OPENSSL-1.1 to OPENSSL.
* gnu/tests/databases.scm (%mysql-os): Adjust config file so MariaDB works on
overlayfs.
This test never managed to reveal the problem described in [1] because
from gnu/system/vm.scm it is seen that our "/tmp" mount is filtered out and
replaced with a "/tmp" file-system that is mounted with (needed-for-boot? #t).
This last bit is crucial as the problem was caused by the user specified "/tmp"
file-system lacking this part which caused "/tmp" being mounted after
x11-socket-directory-service has run, effectively shadowing the directory.
[1]: <https://issues.guix.gnu.org/57589>
* gnu/tests/gdm.scm (%test-gdm-wayland-tmpfs): Delete variable.
(make-os): Remove tmpfs? argument.
(run-gdm-test): Remove tmpfs? argument. Add a small delay since
waiting for gdm.pid is not enough, causing the tests to fail sporadically.
Reviewed-by: Josselin Poiret <dev@jpoiret.xyz>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
The x11-socket-directory-service misuses activation-service-type
to create directories. This kind of usage is incorrect since
activation-service-type does not depend on file-systems, hence incompatible
with user defined /tmp mount.
This commit turns x11-socket-directory-service into a shepherd one-shot
service by defining a new x11-socket-directory-service-type.
* gnu/services/desktop.scm (x11-socket-directory-service-type): New variable.
(x11-socket-directory-service): Deprecate procedure.
(desktop-services-for-system): Use new service-type.
* gnu/tests/lightdm.scm: Ditto.
Reviewed-by: Josselin Poiret <dev@jpoiret.xyz>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/system.scm (operating-system-hosts-file): Deprecate procedure.
(warn-hosts-file-field-deprecation): New procedure, helper for
deprecated variable.
(operating-system)[hosts-file]: Use helper to warn deprecated field.
(local-host-aliases): Mark as deprecated.
(local-host-entries): New procedure.
(operating-system-default-essential-services,
hurd-default-essential-services): Use hosts-service-type. Use
'%operating-system-hosts-file' and 'local-host-entries'.
(default-/etc/hosts): Remove procedure.
(operating-system-etc-service): Remove hosts file.
* doc/guix.texi (operating-system Reference)
(Networking Services) (Virtualization Services): Rewrite documentation
entries to use hosts-service-type.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/audio.scm (mympd-service-type): New variable.
* gnu/tests/audio.scm (%test-mympd): New variable.
* doc/guix.texi: Document it.
Signed-off-by: Liliana Marie Prikler <liliana.prikler@gmail.com>
* gnu/tests/base.scm (%test-basic-os): Rename to ...
(test-basic-os): ... this, and turn into procedure that takes optional KERNEL
argument.
(%test-basic-os): Use that procedure.
(%test-linux-libre-5.15, %test-linux-libre-5.10, %test-linux-libre-5.4,
%test-linux-libre-4.19, %test-linux-libre-4.14, %test-linux-libre-4.9): New
tests.
This reverts commit 0f66ef9aa9. e2fsprogs is
now included in the installation operating system since
34f69bc6e6ea555929ecca83ee7592f5261ff5f2, making this workaround obsolete.
Suggested-by: Ludovic Courtès <ludo@gnu.org>
This reverts commit 0f66ef9aa9. e2fsprogs is
now included in the installation operating system since
34f69bc6e6ea555929ecca83ee7592f5261ff5f2, making this workaround obsolete.
Suggested-by: Ludovic Courtès <ludo@gnu.org>
This is to validate that it works, when the login manager service type is
properly specified.
* gnu/tests/lightdm.scm (%lightdm-os): Use set-xorg-configuration.
There was a tiny possibility that the first QEMU process would still be
running by the time we launch the second one.
* gnu/build/marionette.scm (marionette-pid): Export.
* gnu/tests/base.scm (run-root-unmount-test)[test]: Add 'waitpid' call.
Doing so would cause the extra package dependencies to not be
correctly registered as dependencies, which would lead to a silent
failure when attempting to load or byte compile the module at the time
guix build itself (e.g., when running 'guix pull').
* gnu/tests/vnc.scm (%xvnc-os) [packages]: Turn the the
specification->package declaration into a list of package objects.
It has only one user, which is better suited for wait-for-screen-text anyway.
* gnu/tests/base.scm (run-basic-test): Refactor to use wait-for-screen-text
instead of marionette-screen-text.
This is a follow-up of: 45eac6cdf5.
It fixes the following error:
+ mkfs.ext4 -L my-root /dev/vda2
sh: line 12: mkfs.ext4: command not found
* gnu/tests/install.scm (%test-iso-image-installer): Add e2fsprogs to the
appended packages.
* gnu/tests/telephony.scm (make-jami-os): Add libjami:debug, gdb, guile,
guile-ac-d-bus, guile-readline, guile-fibers, screen and strace.
(run-jami-test)<jami service actions, ban/unban contacts>: Add (ice-9 match),
for lambda-match (worked without it but needed when manually testing).
Add a new image test module to validate the image creation itself. The images
structures are validated using guile-parted. Checking the content of those
images is out of scope and should be performed in other modules (installation
for instance).
* gnu/tests/image.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
* gnu/services/lightdm.scm: New service.
* tests/services/lightdm.scm: Test it.
* doc/guix.texi (X Window): Document it.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register it.
Co-authored-by: L p R n d n <guix@lprndn.info>
Co-authored-by: Ricardo Wurmus <rekado@elephly.net>
* gnu/services/base.scm (<greetd-configuration>)
[greeter-supplementary-groups]: New field.
(%greetd-accounts): Rename to...
(greetd-accounts): ... this. Convert to a function that takes a config
argument. Use greeter-supplementary-groups.
(greetd-service-type): Adjust accordingly.
* gnu/tests/desktop.scm (%minimal-services): Add test for
greeter-supplementary-groups.
* doc/guix.texi ("Base Services")[greetd-service-type]: Document
greeter-supplementary-groups.
* gnu/services/desktop.scm (seatd-group-sanitizer): New variable.
(<seatd-configuration>)[user]: Removed field.
[group]: Changed to "seat". Sanitize via seatd-group-sanitizer.
(seatd-accounts): New variable.
(seatd-environment): Adjust to <seatd-configuration> ABI.
(seatd-service-type)[extensions]: Add account-service-type with seatd-accounts.
* gnu/tests/desktop.scm (run-minimal-desktop-test): Check for correct
ownership of $SEATD_SOCK.
* doc/guix.texi ("Desktop Services")[seatd-service-type]: Mention that users
may need to become members of the "seat" group.
Update default value for group field.
Add explanation on seatd.sock file.
Remove dropped user field.
Enable the QEMU guest agent interface in marionette VMs, run the
qemu-guest-agent service in one and try talking to it.
* gnu/build/marionette.scm (make-marionette): Enable the guest agent device.
* gnu/tests/virtualization.scm (run-qemu-guest-agent-test): New procedure.
(%test-qemu-guest-agent): New variable.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://issues.guix.gnu.org/53210>.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
* gnu/system/install.scm (%installation-services): Set 'guix' to
use (current-guix) in 'guix-configuration'.
* gnu/system/examples/vm-image.tmpl: Likewise.
* gnu/tests/install.scm (operating-system-with-current-guix): Remove.
(run-install, installation-os-for-gui-tests): Remove its uses.
* Makefile.am (release): Remove intermediate use of
'update-guix-package.scm' and subsequent 'git commit' invocation.
* gnu/tests/telephony.scm (%dummy-jami-account-partial): New variable.
(make-jami-os): Add a PARTIAL? argument and use it to select the jami-account
variant to use.
(%jami-os-provisioning-partial): New variable.
(run-jami-test): Add a PARTIAL? argument, and use it to select operating
system variant. Skip allowed-contacts and moderators test when PARTIAL? is
true.
(%test-jami-provisioning-partial): New test.
Since revision 32, guix-data-service starts immediately but returns an HTTP
error code until initialization is complete. Adjust the test accordingly, and
remove the increased startup time limit.
* gnu/services/guix.scm (guix-data-service): Use default #:pid-file-timeout.
* gnu/tests/guix.scm (guix-data-service): Retry the http-get test several
times to give the service time to initialize.
Signed-off-by: Christopher Baines <mail@cbaines.net>
Previously, the default value would lead to a wrong-type-to-apply crash.
* gnu/system/image.scm (system-disk-image)[image-builder]: When
'partition-initializer' returns #f, fall back to
INITIALIZE-ROOT-PARTITION.
* gnu/tests/base.scm (run-root-unmount-test)[test-image]: Remove
'initializer' field of partition.
* gnu/image.scm (<partition>)[initializer]: Add comment.
With the default limit of 512 MB the test sometimes fails, in different
ways. Fixes https://issues.guix.gnu.org/55206.
* gnu/tests/ldap.scm (run-ldap-test): Increase memory size to 1024 MiB.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
The tests would otherwise fail on an old desktop.
* gnu/tests/docker.scm (run-docker-test)
<make-marionette>: Specify a timeout of 60 s.
(run-docker-system-test) <make-marionette>: Likewise.
This partially fixes <https://issues.guix.gnu.org/54786>, allowing the 'jami'
and 'jami-provisioning' system tests to pass again.
In version 0.9.0, Shepherd constructors are now run concurrently, via
cooperative scheduling (Guile Fibers). The Jami service previously relied on
blocking sleeps while polling for D-Bus services to become ready after forking
a process; this wouldn't work anymore since while blocking the service process
wouldn't be given the chance to finish starting. The new reliance on Fibers
in Shepherd's fork+exec-command in the helper 'send-dbus' procedure also meant
that it wouldn't work outside of Shepherd anymore. Finally, the
'start-service' Shepherd procedure used in the test suite would cause the Jami
daemon to be spawned multiple times (a bug introduced in Shepherd 0.9.0).
To fix/simplify these problems, this change does the following:
1. Use the Guile AC/D-Bus library for D-Bus communication, which simplify
things, such as avoiding the need to fork 'dbus-send' processes.
2. The non-blocking 'sleep' version of Fiber is used for the 'with-retries'
waiting syntax.
3. A 'dbus' package variant is used to adjust the session bus configuration,
tailoring it for the use case at hand.
4. Avoid start-service in the tests, preferring 'jami-service-available?' for
now.
* gnu/build/jami-service.scm (parse-dbus-reply, strip-quotes)
(deserialize-item, serialize-boolean, dbus-dict->alist)
(dbus-array->list, parse-account-ids, parse-account-details)
(parse-contacts): Delete procedures.
(%send-dbus-binary, %send-dbus-bus, %send-dbus-user, %send-dbus-group)
(%send-dbus-debug): Delete parameters.
(jami-service-running?): New procedure.
(send-dbus/configuration-manager): Rename to...
(call-configuration-manager-method): ... this. Turn METHOD into a positional
argument. Turn ARGUMENTS into an optional argument. Invoke
`call-dbus-method' instead of `send-dbus', adjusting callers accordingly.
(get-account-ids, id->account-details, id->account-details)
(id->volatile-account-details, username->id, add-account remove-account)
(username->contacts, remove-contact, add-contact, set-account-details)
(set-all-moderators, username->all-moderators?, username->moderators)
(set-moderator): Adjust accordingly.
(with-retries, send-dbus, dbus-available-services)
(dbus-service-available?): Move to ...
* gnu/build/dbus-service.scm: ... this new module.
(send-dbus): Rewrite to use the Guile AC/D-Bus library.
(%dbus-query-timeout, sleep*): New variables.
(%current-dbus-connection): New parameter.
(initialize-dbus-connection!, argument->signature-type)
(call-dbus-method): New procedures.
(dbus-available-services): Adjust accordingly.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register new module.
* gnu/packages/glib.scm (dbus-for-jami): New variable.
* gnu/services/telephony.scm: (jami-configuration)[dbus]: Default to
dbus-for-jami.
(jami-dbus-session-activation): Write a D-Bus daemon configuration file at
'/var/run/jami/session-local.conf'.
(jami-shepherd-services): Add the closure of guile-ac-d-bus and guile-fibers
as extensions. Adjust imported modules. Remove no longer used parameters.
<jami-dbus-session>: Use a PID file, avoiding the need for the manual
synchronization.
<jami>: Set DBUS_SESSION_BUS_ADDRESS environment variable. Poll using
'jami-service-available?' instead of 'dbus-service-available?'.
* gnu/tests/telephony.scm (run-jami-test): Add needed Guile extensions. Set
DBUS_SESSION_BUS_ADDRESS environment variable. Adjust all tests to use
'jami-service-available?' to determine if the service is started rather than
the now problematic Shepherd's 'start-service'.
* gnu/tests/virtualization.scm (run-childhurd-test)[run-uname-over-ssh]:
Rename to...
[run-command-over-ssh]: ... this. Add 'command' parameter and honor it.
["SSH up and running"]: Adjust accordingly.
Fixes <https://issues.guix.gnu.org/55335>.
Reported by Christopher Baines <mail@cbaines.net>.
* gnu/services/ssh.scm (openssh-shepherd-service)[inetd-style?]: New variable.
<start>: Use it. When using 'make-inetd-constructor', pass a list of
endpoints as is possible with the Shepherd 0.9.1.
<stop>: Adjust accordingly.
* gnu/tests/ssh.scm (run-ssh-test)["wait for port 22"]: Rename to...
["wait for port 22, IPv4"]: ... this.
["wait for port 22, IPv6"]: New test.
* gnu/services/messaging.scm (bitlbee-shepherd-service): Add call to
'least-authority-wrapper'. In 'start' method, use
'make-inetd-constructor' when available.
* gnu/tests/messaging.scm (run-bitlbee-test)["valid PID"]: Remove test.
This is a follow-up of 73eeeeafbb.
* gnu/tests/web.scm (run-tailon-test): Wait for the TCP port 8080 instead of
relying on start-service.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Fixes a regression introduced in the Shepherd 0.9.0 whereby clients can
start a service that is already being started, leading to two instances
of the process (and usually failure of the second attempt to start it).
Partly fixes <https://issues.guix.gnu.org/54786>.
Reported by Mathieu Othacehe.
* gnu/tests/version-control.scm (run-cgit-test)
["nginx running", "fcgiwrap running"]: Wail for a file/TCP port instead
of starting the service.
(run-git-http-test)["nginx running"]: Likewise.
(run-gitile-test)["nginx running"]: Likewise.
* gnu/services/ssh.scm (openssh-shepherd-service): Use
'make-inetd-constructor' when it is defined.
(<openssh-configuration>)[max-connections]: New field.
* gnu/tests/ssh.scm (run-ssh-test)["sshd PID"]: Adjust to cope with
PID-FILE being #f.
* gnu/tests/ssh.scm (%test-openssh): Pass #f as the 'pid-file'
argument.
* doc/guix.texi (Networking Services): Document 'max-connections'.
* gnu/tests/install.scm (run-install)[packages]: Unconditionally add to OS.
[NUMBER-OF-DISKS]: Add argument, update doc and adjust. The returned gexp
output is now a list of images rather than the image itself.
* gnu/tests/install.scm (qemu-command*): Rename IMAGE argument to IMAGES, to
account for the above change. Adjust doc. Generate a QEMU '-drive' argument
for each disk image.
(%test-installed-os): Rename the IMAGE variable to IMAGES.
(%test-installed-extlinux-os): Likewise.
(%test-iso-image-installer): Likewise.
(%test-separate-home-os): Likewise.
(%test-separate-store-os): Likewise.
(%test-raid-root-os): Likewise.
(%test-encrypted-root-os): Likewise.
(%test-lvm-separate-home-os): Likewise.
(%test-encrypted-root-not-boot-os): Likewise.
(%test-btrfs-root-os): Likewise.
(%test-btrfs-raid-root-os): Likewise.
(%test-btrfs-root-on-subvolume-os): Likewise.
(%test-jfs-root-os): Likewise.
(%test-f2fs-root-os): Likewise.
(%test-xfs-root-os): Likewise.
(guided-installation-test): Likewise.
* gnu/tests/install.scm (qemu-command/writable-image): Replace the use of a
writable backing file by the use of the '-snapshot' option, and rename to...
(qemu-command*): ... this, adjusting all calls.
The 'login on tty1' and 'getlogin on tty1' tests were failing on a machine
equipped with slower hard drives.
* gnu/tests/base.scm (run-basic-test)
["login on tty1", "getlogin on tty1"]: Bump timeout from 10 to 30 s.
The <nix/config.nix> support has been removed in Nix 2.4:
https://github.com/NixOS/nix/pull/4025. Rely on the store ping command instead
to check that we can communicate with the daemon.
* gnu/tests/package-management.scm (run-nix-test): Use the store ping command
instead of building a dummy derivation.
* gnu/services/telephony.scm (jami-configuration)[jamid]: Rename libring to
libjami.
* gnu/services/telephony.scm
(jami-configuration->command-line-arguments): Adjust daemon file name.
* gnu/services/telephony.scm (jami-service-type): Adjust doc.
* gnu/tests/telephony.scm (run-jami-test): Check for 'jamid' process, not
'dring'.
* doc/guix.texi (Telephony Services): Adjust doc for the jami-qt to jami and
libring to libjami packages renaming.
We had several bug reports with a root cause of "the clock was
incorrect" from users who used the installer to install a non-graphical
Guix System.
* gnu/installer/services.scm (%system-services): Add the ntp-service-type.
* gnu/installer/newt/services.scm (run-system-administration-cbt-page): New
variable.
(run-services-page): Use run-system-administration-cbt-page when not
installing a desktop.
* gnu/installer/tests.scm (choose-services): Add and use a
choose-misc-service? procedure.
* gnu/tests/install.scm (installation-target-os-for-gui-tests)<services>: Add
ntp-service-type.
This test has probably never been working. Rename it nfs-full, and test that
an NFS server can be started in a VM and mounted in another VM.
* gnu/tests/nfs.scm (run-nfs-root-fs-test): Rename it ...
(run-nfs-full-test): ... this way.
(%test-nfs-root-fs): Rename it ...
(%test-nfs-full): ... this way.
The docker tests are broken because the docker overlay doesn't support running
on our own storage overlay. Use the new <virtual-machine> volatile? field to
spawn a VM with a persistent storage and no overlay.
* gnu/tests/docker.scm (run-docker-test): Add the docker-tarball to the gc
roots as the host store is not shared anymore. Spawn a VM without volatile
storage.
(run-docker-system-test): Ditto.
(%test-docker-system): Adapt it to use the image API.
This code duplicates the (gnu system image) and (gnu build image) code. Using
VM for image generation is not needed, not portable and really slow. Remove
all the VM image generation code to make sure that only the image API is used.
* gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ...
* gnu/build/marionette.scm: ... here.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it.
* tests/modules.scm: Ditto.
* gnu/tests/install.scm: Ditto.
* gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm,
qemu-img, system-qemu-image/shared-store and system-docker-image procedures.
* doc/guix.texi (G-Expressions): Adapt it.
* gnu/tests/rsync.scm (run-rsync-test)["Test file not copied to
read-only share", "Test file correctly received from read-only share"]:
New tests.
(%rsync-os): Define two modules.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
Use a CEST timezone as this is the assumed timezone in the run-basic-test
procedure.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%btrfs-root-on-subvolume-os): Use a CEST timezone.
Fixes <https://issues.guix.gnu.org/50830>.
Reported by podiki on #guix.
Previously, glibc 2.33 would look for
/gnu/store/...-glibc-2.33/etc/localtime instead of /etc/localtime.
* gnu/packages/base.scm (glibc)[arguments]: Remove #:make-flags.
[phases]: In 'pre-configure', modify 'inet/Makefile' instead of
'sunrpc/Makefile' since this is where these bits are in 2.33.
(glibc-2.31)[arguments]: Add 'set-etc-rpc-installation-directory'
phase.
(glibc-2.30): Inherit from GLIBC-2.31.
* gnu/tests/base.scm (run-basic-test)["libc honors /etc/localtime"]: New
test.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Ludovic Courtès
Bruno Victal
Marius Bakke
Leo Famulari
Maxim Cournoyer
Mathieu Othacehe
Simon Streit
muradm
Timotej Lazar
Christopher Baines
Ludovic Courtès