* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
Use a CEST timezone as this is the assumed timezone in the run-basic-test
procedure.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%btrfs-root-on-subvolume-os): Use a CEST timezone.
Fixes <https://issues.guix.gnu.org/50830>.
Reported by podiki on #guix.
Previously, glibc 2.33 would look for
/gnu/store/...-glibc-2.33/etc/localtime instead of /etc/localtime.
* gnu/packages/base.scm (glibc)[arguments]: Remove #:make-flags.
[phases]: In 'pre-configure', modify 'inet/Makefile' instead of
'sunrpc/Makefile' since this is where these bits are in 2.33.
(glibc-2.31)[arguments]: Add 'set-etc-rpc-installation-directory'
phase.
(glibc-2.30): Inherit from GLIBC-2.31.
* gnu/tests/base.scm (run-basic-test)["libc honors /etc/localtime"]: New
test.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Fixes a regression introduced in
0b5e128750, whereby 'qemu-img create ...'
as used here would fail with:
qemu-img: disk.img: Backing file specified without backing format
thereby breaking tests from (gnu tests install).
* gnu/tests/install.scm (qemu-command/writable-image): Pass "-F qcow2".
Adapt to the postgresql default socket directory set to /var/run/postgresql.
* gnu/services/databases.scm (<postgresql-config-file>)[socket-directory]: Set
to /var/run/postgresql.
(<postgresql-role-configuration>): Ditto.
* gnu/tests/databases.scm (run-postgresql-test): Adapt it.
* gnu/services/version-control.scm (gitile-service-type): New variable.
* doc/guix.texi (Version Control Services): Document it.
* gnu/tests/version-control.scm (%test-gitile): New variable.
Fixes <https://issues.guix.gnu.org/40997>.
* gnu/bootloader.scm (<bootloader-configuration>): New 'targets' field.
(%bootloader-configuration-target): New procedure.
(bootloader-configuration-target): Add deprecation warning.
(bootloader-configuration-targets): New procedure.
* guix/scripts/system.scm (install): Access targets via
bootloader-configuration-targets.
(perform-action)[bootloader-target]: Remove unused argument and update doc.
Access targets via bootloader-configuration-targets and fix indentation.
(process-action): Access targets via bootloader-configuration-targets.
Do not provide the unused BOOTLOADER-TARGET argument when applying
`perform-action'.
* guix/scripts/system/reconfigure.scm (install-bootloader-program): Rename
DEVICE argument to DEVICES. Adjust doc and comment. Apply `installer' and
`disk-installer' for every DEVICES.
(install-bootloader): Access targets via bootloader-configuration-targets and
rename variable from DEVICE to DEVICES.
* gnu/tests/install.scm: Adjust accordingly.
* tests/guix-system.sh: Likewise.
* gnu/tests/reconfigure.scm (run-install-bootloader-test): Adjust the DEVICES
argument so that it is a list.
* doc/guix.texi: Update doc.
This reverts commit 4673f81793, which reverted
commit 69dcc24c9f with the fix detailed below.
Thanks to Christopher Baines for reporting the failure and proposing a fix.
* guix/self.scm (compiled-guix) [*system-test-modules*]: Add the test data
files via the 'extra-files' argument.
* gnu/local.mk (dist_patch_DATA): Move the tests/data/jami-dummy-account.dat
file to...
* gnu/local.mk (MODULES_NOT_COMPILED): ... here.
* gnu/services/telephony.scm (string-or-computed-file?)
(string-list?, account-fingerprint-list?): New procedures.
(maybe-string-list, maybe-account-fingerprint-list)
(maybe-boolean, maybe-string, jami-account-list): New configuration field
types.
(serialize-string-list, serialize-boolean, serialize-string)
(jami-account, jami-account->alist, jami-configuration)
(jami-account-list?, jami-account-list-maybe): New procedures.
(%jami-accounts): New variable.
(jami-configuration->command-line-arguments): New procedure.
(jami-dbus-session-activation, jami-shepherd-services): New procedures.
(jami-service-type): New variable.
* gnu/build/jami-service.scm: New file.
* gnu/tests/data/jami-dummy-account.dat: Likewise.
* gnu/tests/telephony.scm: Likewise.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register them.
* Makefile.am (SCM_TESTS): Register the test file.
(dist_patch_DATA): Register the new data file.
* doc/guix.texi (Telephony Services): Document it.
* gnu/installer/tests.scm (choose-services): Accept a new
choose-other-service? keyword argument, defaulting to false.
Expect an "Other services" checkbox-list. Update docstring.
For some time, OpenSSH's option 'PermitRootLogin' has deprecated the
ambiguous argument 'without-password' with 'prohibit-password'.
* doc/guix.texi (Network Services): Replace 'without-password by
'prohibit-password.
* gnu/machine/digital-ocean.scm (guix-infect): Change system
configuration to use 'prohibit-password.
* gnu/services/ssh.scm (openssh-configuration): Change comment to use
'prohibit-password.
(openssh-config-file): Add support for 'prohibit-password to
'permit-root-login'. Warn about deprecated 'without-password usage.
* gnu/tests/ganeti.scm (%ganeti-os): Replace 'without-password by
'prohibit-password.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
* gnu/tests/linux-modules.scm
(run-loadable-kernel-modules-service-test): Actually load the modules
with kernel-module-loader-service-type. Use a singleton service instead
of defining a custom one.
* doc/guix.texi (Service Reference): To give an example of
linux-loadable-module-service-type use a singleton instead of defining a
new service.
* gnu/system.scm (operating-system-directory-base-entries): Remove code
to handle generation of "kernel" for linux-libre kernels.
(operating-system-default-essential-services): Instantiate
linux-builder-service-type.
(package-for-kernel): Move ...
* gnu/services.scm: ... to here.
(linux-builder-service-type): New variable.
(linux-builder-configuration): New type.
(linux-loadable-module-service-type): New variable.
* gnu/tests/linux-modules.scm (run-loadable-kernel-modules-test): Move
code to ...
(run-loadable-kernel-modules-test-base): ... new procedure here.
(run-loadable-kernel-modules-service-test): New procedure.
(%test-loadable-kernel-modules-service-0): New variable.
(%test-loadable-kernel-modules-service-1): New variable.
(%test-loadable-kernel-modules-service-2): New variable.
* doc/guix.texi: Document linux-loadable-module-service-type.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
* gnu/installer/tests.scm (conclude-installation): Rename it into ...
(start-installation): ... this new procedure.
(complete-installation): New procedure.
(choose-partitioning): Add an uefi-support? argument.
* gnu/tests/install.scm (uefi-firmware): New procedure.
(run-install, qemu-command/writable-image, gui-test-program,
installation-target-os-for-gui-tests): Add an uefi-support? argument.
(%extra-packages): Add grub-efi, fatfsck/static and dosfstools.
(%test-gui-installed-os): New variable.
Fixes: <https://issues.guix.gnu.org/47745>.
* gnu/tests/ldap.scm (run-ldap-test): Use a password with more that 8
characters so that dscreate doesn't fail.
The patchwork test sometimes fail because there's not enough available RAM in
the marionette. Increase the VM memory size to 1024MiB.
* gnu/tests/web.scm (run-patchwork-test): Increase VM memory size to 1024MiB.
The "http-get" test is sometimes failing because the Web server is not yet
initialized and returns the 500 error code.
Use the retry-or-error procedure, like in the tailon test to do a few retries.
* gnu/tests/web.scm (run-tailon-test): Move "retry-or-error" procedure to the
top level and adapt its call.
(run-patchwork-test): Use it.
This fixes: <https://issues.guix.gnu.org/47727>. The OCR prompt detection is
failing, so remove it altogether. It looks like the test doesn't need the
prompt detection delay to work properly.
* gnu/tests/base.scm (run-halt-test): Remove failing OCR detection.
Fixes <https://bugs.gnu.org/46737>.
PostgreSQL running with a different socket directory to the default one in the
package itself breaks some services, this commit restores the previous
behaviour where PostgreSQL by default will run with a socket directory that
matches the default used by PostgreSQL packaged for Guix.
Switching to a different default value can happen, but only alongside changing
the PostgreSQL package.
* gnu/services/databases.scm (<postgresql-config-file>)[socket-directory]:
Change default to #false.
* doc/guix.texi (Database Services): Update documentation, and specify a
different value for disabling connections via sockets.
* gnu/tests/guix.scm (%guix-data-service-os): Use default PostgreSQL
behaviour.
* gnu/tests/monitoring.scm (%zabbix-os): Likewise.
* gnu/tests/web.scm (patchwork-os): Likewise.
Signed-off-by: Leo Famulari <leo@famulari.name>
It is tested whether the IPFS service listens
at the gateway and API ports and whether it
is possible to upload and download a bytevector.
* gnu/tests/networking.scm
(%ipfs-os): New variable.
(run-ipfs-test): New procedure.
(%test-ipfs): New system test.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This fixes the following error when running the "docker-system" test:
In ice-9/ftw.scm:
553:30 1 (_ #<directory stream db6660>)
In unknown file:
0 (readdir #<directory stream db6660>)
ERROR: In procedure readdir:
In procedure readdir: Cannot allocate memory
* gnu/tests/docker.scm (%test-docker-system): Bump image building VM memory
size to 1024 MiB.
Those tests don't make sense anymore as the Cuirass 1.0 version has removed
the possibility to execute a custom registration procedure.
* gnu/tests/cuirass.scm: Remove it.
* gnu/local.mk (GNU_SYSTEM_MODULES): Ditto.
mongodb 3.4.10 has unpatched CVEs and mongodb 3.4.24 has some files in the
release tarball under the SSPL, therefore we cannot provide mongodb while
upholding to good security standards.
It turns out feff80cec3 was right since while
the main license file wasnt altered to SSPL, some files in the tree contain
SSPL headers.
* gnu/packages/databases.scm (go-gopkg.in-mgo.v2): Remove.
* gnu/packages/databases.scm (mongo-tools): Remove.
* doc/guix.texi (mongodb-service-type): Remove.
* gnu/tests/databases.scm (%test-mongodb, %mongodb-os, run-mongodb-test):
Remove.
* gnu/services/databases.scm (mongodb-configuration, mongodb-configuration?,
mongodb-configuration-mongodb, mongodb-configuration-config-file,
mongodb-configuration-data-directory, mongodb-service-type,
%default-mongodb-configuration-file, %mongodb-accounts, mongodb-activation,
mongodb-shepherd-service): Remove.
* gnu/packages/databases.scm (mongodb): Remove.
Ludovic Courtès
Mathieu Othacehe
Marius Bakke
Ludovic Courtès
Tobias Geerinckx-Rice
Julien Lepiller
Maxim Cournoyer
Brice Waegeneire
raid5atemyhomework
Christopher Baines
Maxime Devos
Pierre Langlois
Simon South
Léo Le Bouter