* gnu/system/shadow.scm (default-skeleton): Update gdbinit to search for
more debug packages in guix-home and the system profile.
(skeleton-directory): Move .gdbinit to .config/gdb/gdbinit.
Make it consistent with bash_profile generated by Guix Home.
* gnu/system/shadow.scm (default-skeletons)[bash_profile]: Source .profile in
skeleton bash_profile.
Users can override 'PS1' in ~/.bashrc if they wish.
Previously, on Guix Home, the "default" 'PS1' would be set in ~/.bashrc
when 'home-bash-configuration-guix-defaults?' is true, preventing users
from overriding it via the 'environment-variables' field of
'home-bash-extension'.
* gnu/system/shadow.scm (%default-bashrc): Remove 'PS1' setting.
* gnu/system.scm (operating-system-etc-service): Define PS1 in
/etc/bashrc.
* gnu/home/services/shells.scm (add-bash-configuration): When
'home-bash-configuration-guix-defaults?' is true, add a default 'PS1' to
~/.bash_profile.
* gnu/system/shadow.scm (%default-bashrc): New variable. Source
/etc/bashrc only if it exists.
(default-skeletons): Use it.
* gnu/home/services/shells.scm (guix-bashrc): Remove.
(add-bash-configuration): Refer to '%default-bashrc' instead.
* gnu/system/shadow.scm (account-activation): Delete duplicate (eq?) users
and groups before transforming them to specs and asserting, that names are
unique.
The change from formatted message causes the line to no longer automatically
be ended. This will need to be reverted once again, when duplicate names
become hard errors.
* gnu/system/shadow.scm (assert-unique-account-names)
(assert-unique-group-names): End format strings in ~%.
This reverts commit a3002104a8, which
breaks certain system configurations like:
$ guix system reconfigure config.scm
guix system: error: the following groups appear more than once: lp
*gnu/system/shadow.scm (find-duplicates): New variable.
(assert-unique-account-names, assert-unique-group-names): New variables.
(account-activation): Use them here.
This is a follow-up of 755f365b02.
As (zlib) is autoloaded in (gnu build linux-modules), "guile-zlib" is needed
as an extension only when it is effectively used.
* gnu/installer.scm (installer-program): Remove "guile-zlib" from the extensions.
* gnu/machine/ssh.scm (machine-check-initrd-modules): Ditto.
* gnu/services.scm (activation-script): Ditto.
* gnu/services/base.scm (default-serial-port): Ditto,
(agetty-shepherd-service): ditto,
(udev-service-type): ditto.
* gnu/system/image.scm (gcrypt-sqlite3&co): Ditto.
* gnu/system/shadow.scm (account-shepherd-service): Ditto.
This commit adds support for GZIP compression for linux-libre kernel
modules. The initrd modules are kept uncompressed as the initrd is already
compressed as a whole.
The linux-libre kernel also supports XZ compression, but as Guix does not have
any available bindings for now, and the compression time is far more
significant, GZIP seems to be a better option.
* gnu/build/linux-modules.scm (modinfo-section-contents): Use
'call-with-gzip-input-port' to read from a module file using '.gz' extension,
(strip-extension): new procedure,
(dot-ko): adapt to support compression,
(ensure-dot-ko): ditto,
(file-name->module-name): ditto,
(find-module-file): ditto,
(load-linux-module*): ditto,
(module-name->file-name/guess): ditto,
(module-name-lookup): ditto,
(write-module-name-database): ditto,
(write-module-alias-database): ditto,
(write-module-device-database): ditto.
* gnu/installer.scm (installer-program): Add "guile-zlib" to the extensions.
* gnu/machine/ssh.scm (machine-check-initrd-modules): Ditto.
* gnu/services.scm (activation-script): Ditto.
* gnu/services/base.scm (default-serial-port): Ditto,
(agetty-shepherd-service): ditto,
(udev-service-type): ditto.
* gnu/system/image.scm (gcrypt-sqlite3&co): Ditto.
* gnu/system/linux-initrd.scm (flat-linux-module-directory): Add "guile-zlib"
to the extensions and make sure that the initrd only contains
uncompressed module files.
* gnu/system/shadow.scm (account-shepherd-service): Add "guile-zlib" to the
extensions.
* guix/profiles.scm (linux-module-database): Ditto.
Instead of hard coding the debug directory to that of the user profile, use
Guile scripting in combination with a new search path specification on GDB to
specify the debug file directories.
* gnu/packages/gdb.scm (gdb-9.1): Add a search path specification for the
GDB_DEBUG_FILE_DIRECTORY environment variable.
* gnu/system/shadow.scm (default-skeletons)[gdbinit]: Derive the value of
DEBUG-FILE-DIRECTORY via the GDB_DEBUG_FILE_DIRECTORY environment variable.
* doc/guix.texi (Installing Debugging Files): Document it.
* gnu/services/dbus.scm (polkit-service-type)[description]: New field.
* gnu/services/dict.scm (dicod-service-type)[description]: New field.
* gnu/services/dns.scm (knot-service-type)[description]: New field.
* gnu/services/networking.scm (dhcpd-service-type)[description]: New field.
* gnu/services/shepherd.scm (shepherd-root-service-type)[description]:
New field.
* gnu/services/xorg.scm (slim-service-type)[description]: New field.
(screen-locker-service-type)[description]: New field.
* gnu/system/pam.scm (pam-root-service-type)[description]: New field.
* gnu/system/shadow.scm (account-service-type)[description]: New field.
Until now, 'user-homes' happened to start right after 'user-processes'
and before services that depend on a home directory but the dependency
was not explicit. This addresses it.
* gnu/system/shadow.scm (account-service-type): Extend
USER-PROCESSES-SERVICE-TYPE.
This reverts commit bd71818df3.
This changed caused system reconfiguration to fail like this:
------
building /gnu/store/y1x8asbzw624ywgkpin35p1i4bqnyfy2-skel.drv...
Backtrace:
4 (primitive-load "/gnu/store/2x7d0jsbgf2ndb5fsk0nj07rhsx?")
In ice-9/eval.scm:
619:8 3 (_ #f)
In ice-9/boot-9.scm:
260:13 2 (for-each #<procedure 7ffff6ad8100 at ice-9/eval.scm:3?> ?)
In guix/build/utils.scm:
343:27 1 (_ "/gnu/store/ajrgkj1s9vdcq00drn703f4zj9dvfrsv-nanorc" ?)
In unknown file:
0 (copy-file "/gnu/store/ajrgkj1s9vdcq00drn703f4zj9dvfrs?" ?)
ERROR: In procedure copy-file:
In procedure copy-file: No such file or directory
`/gnu/store/v1grsca743phw41lyf63dzmh9nz5jlpn-bash_profile' -> `.bash_profile'
`/gnu/store/xdsaw0mj6axj427hyi6ysrnsxi21n7d5-bashrc' -> `.bashrc'
`/gnu/store/6i0b236dyar78zc5k5hrj5dv3vr4zb9w-zprofile' -> `.zprofile'
`/gnu/store/ajrgkj1s9vdcq00drn703f4zj9dvfrsv-nanorc' -> `.config/nano/nanorc'
builder for `/gnu/store/y1x8asbzw624ywgkpin35p1i4bqnyfy2-skel.drv' failed with exit code 1
------
* gnu/system/accounts.scm (sexp->user-group, sexp->user-account): New
procedures.
* gnu/system/shadow.scm (account-activation): Call them in the arguments
to 'activate-users+groups'.
(account-shepherd-service): Likewise.
* gnu/build/activation.scm (activate-users+groups): Expect a list of
<user-account> and a list of <user-group>. Replace uses of 'match' on
tuples with calls to record accessors.
(activate-user-home): Likewise.
The (gnu system accounts) module is meant to be used both on the build-
and on the host-side.
* gnu/system/shadow.scm <top level>: Call 'default-shell'.
(<user-account>, <user-group>): Move to...
* gnu/system/accounts.scm: ... here. New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add system/accounts.scm.
* gnu/system/shadow.scm (default-skeletons): Substitute ‘--color=auto’
for ‘--color’ (which implies ‘=always’) in aliases.
* doc/guix.texi (G-Expressions): Also adjust examples as that makes
more sense.
This is a followup to commit 1382bde93c,
which disabled automatic sourcing of /etc/bashrc by interactive shell.
The noticeable effect of the change would be that Bash completion would
only work in login shells.
* gnu/system/shadow.scm (default-skeletons)["bashrc"]: Source
/etc/bashrc.
This reduces the closure of Guile from 131 MiB to 116 MiB and removes
extra readline/ncurses builds from the bootstrap path.
* gnu/packages/guile.scm (guile-2.0)[inputs]: Remove READLINE.
(make-guile-readline): New procedure.
(guile-readline): New variable.
* gnu/system/shadow.scm (default-skeletons): Adjust '.guile' so that it
gracefully deals with missing (ice-9 readline).
Fixes <http://bugs.gnu.org/21108>.
Reported by Andy Patterson <ajpatter@uwaterloo.ca>
and Leo Famulari <leo@famulari.name>.
* gnu/build/activation.scm (activate-users+groups)[activate-user]: Pass
#:create-home? #t iff CREATE-HOME? and SYSTEM?.
(activate-user-home): New procedure.
* gnu/system/shadow.scm (account-shepherd-service): New procedure.
(account-service-type)[extensions]: Add SHEPHERD-ROOT-SERVICE-TYPE
extension.
* gnu/tests/base.scm (run-basic-test)["home"]
["skeletons in home directories"]: New tests.
* gnu/tests/install.scm (%separate-home-os, %separate-home-os-source)
(%test-separate-home-os): New variables.
Fixes <http://bugs.gnu.org/24275>.
Reported by John Darrington <john@darrington.wattle.id.au>.
* gnu/system/shadow.scm (%base-user-accounts):
Add (create-home-directory? #f) for "nobody".
Fixes <http://bugs.gnu.org/23971>.
Reported by Vincent Legoll <vincent.legoll@gmail.com>.
* gnu/system/shadow.scm (%base-user-accounts): Add 'shell' field. Set
'home-directory' to "/nonexistent".
Bruno Victal
Ludovic Courtès
Andrew Tropin
宋文武
Efraim Flashner
Christopher Baines
Leo Prikler
Jonathan Brielmaier
Mathieu Othacehe
Maxim Cournoyer
Leo Famulari
Jan Nieuwenhuizen
Chris Marusich
Tobias Geerinckx-Rice
Marius Bakke
Alex Griffin