Since the update to the 2.6.2 release, the closure size of zile has
increased. Switch to mg which is lighter.
* gnu/system.scm (%base-packages-interactive): Replace zile by mg.
* doc/guix.texi (Proceeding with the Installation,
Using the Configuration System): Adapt those sections.
* gnu/system.scm (operating-system-directory-base-entries): Remove code
to handle generation of "kernel" for linux-libre kernels.
(operating-system-default-essential-services): Instantiate
linux-builder-service-type.
(package-for-kernel): Move ...
* gnu/services.scm: ... to here.
(linux-builder-service-type): New variable.
(linux-builder-configuration): New type.
(linux-loadable-module-service-type): New variable.
* gnu/tests/linux-modules.scm (run-loadable-kernel-modules-test): Move
code to ...
(run-loadable-kernel-modules-test-base): ... new procedure here.
(run-loadable-kernel-modules-service-test): New procedure.
(%test-loadable-kernel-modules-service-0): New variable.
(%test-loadable-kernel-modules-service-1): New variable.
(%test-loadable-kernel-modules-service-2): New variable.
* doc/guix.texi: Document linux-loadable-module-service-type.
Signed-off-by: Danny Milosavljevic <dannym@scratchpost.org>
Fixes <https://issues.guix.gnu.org/43530>.
Wget is typically included with most GNU/Linux distributions. It adds about
~3 MiB to the system size.
* gnu/system.scm (%base-packages-networking): Add the wget package.
* gnu/bootloader/grub.scm (grub-configuration-file): New parameter
store-crypto-devices.
[crypto-devices]: New helper function.
[builder]: Use crypto-devices.
* gnu/machine/ssh.scm (roll-back-managed-host): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* gnu/tests/install.scm (%encrypted-root-not-boot-os,
%encrypted-root-not-boot-os): New os declaration.
(%encrypted-root-not-boot-installation-script): New script, whose contents
were initially taken from %encrypted-root-installation-script.
(%test-encrypted-root-not-boot-os): New test.
* gnu/system.scm (define-module): Export
operating-system-bootoader-crypto-devices and
boot-parameters-store-crypto-devices.
(<boot-parameters>): Add field store-crypto-devices.
(read-boot-parameters): Parse store-crypto-devices field.
[uuid-sexp->uuid]: New helper function extracted from
device-sexp->device.
(operating-system-bootloader-crypto-devices): New function.
(operating-system-bootcfg): Use
operating-system-bootloader-crypto-devices to provide its contents to
the bootloader configuration generation process.
(operating-system-boot-parameters): Add store-crypto-devices to the
generated boot-parameters.
(operating-system-boot-parameters-file): Likewise to the file with
the serialized structure.
* guix/scripts/system.scm (reinstall-bootloader): Use
boot-parameters-store-crypto-devices to provide its contents to the
bootloader configuration generation process.
* tests/boot-parameters.scm (%default-store-crypto-devices): New
variable.
(%grub-boot-parameters, test-read-boot-parameters): Use
%default-store-crypto-devices.
(tests store-crypto-devices): New tests.
Fixes <http://issues.guix.gnu.org/44196>
* gnu/machine/ssh.scm (roll-back-managed-host): Use
boot-parameters-store-directory-prefix.
* gnu/system.scm (define-module): Export
boot-parameters-store-directory-prefix.
(<boot-parameters>)[store-directory-prefix]: New field. It is used to
generate the correct paths when /gnu/store is installed on a btrfs
subvolume whose name doesn't match the final runtime path, as the
bootloader doesn't have knowledge about the final mounting points.
[boot-parameters-store-directory-prefix]: New accessor.
(read-boot-parameters): Read directory-prefix from store field.
(operating-system-boot-parameters-file): Add directory-prefix to
store field.
* guix/scripts/system.scm (reinstall-bootloader): Use
boot-parameters-store-directory-prefix.
* test/boot-parameters.scm (%default-btrfs-subvolume,
%default-store-directory-prefix): New variables.
(%grub-boot-parameters): Use %default-store-directory-prefix.
(%default-operating-system): Use %default-btrfs-subvolume.
(test-boot-parameters): Add directory-prefix.
(test optional fields): Add test for directory-prefix.
(test os store-directory-prefix): New test.
* gnu/machine/ssh.scm (roll-back-managed-host): Use locale information
from boot-parameters.
* gnu/system.scm (operating-system-bootcfg): Provide locale information
to the bootloader.
* guix/system/script.scm (reinstall-bootloader): Use locale information
from boot-parameters.
This allows 'guix deploy' to save the config file when it's available.
* gnu/system.scm (operating-system-configuration-file): New procedure.
(operating-system-with-provenance): 'config-file' defaults to the value
returned by 'operating-system-configuration-file'.
When creating a disk-image using --save-provenance, "guix system describe"
now works.
* gnu/system.scm (operating-system-directory-base-entries): Add conditional
"hurd" parameter, make "initrd" parameter conditional.
(hurd-default-essential-services): Use them.
(operating-system-boot-parameters-file): Only add 'initrd' when set.
Note: Using `getxattr' on the Hurd instead of running showtrans does not
work (yet?).
* gnu/build/hurd-boot.scm (setup-translator): Use 'setxattr' instead of
invoking settrans.
* gnu/system.scm (hurd-multiboot-modules): Add --x-xattr-translator-records to
enable xattr-embedding of translators.
Reported by Vitaliy Shatrov <D0dyBo0D0dyBo0@protonmail.com> via IRC.
* gnu/system.scm (operating-system-etc-service): For the Hurd, add '/etc/ttys'
symlink. This fixes terminal behavior in the console by setting TERM=hurd.
This decouples startup of the Hurd from the "hurd" package, moving the RC
script into SYSTEM.
* gnu/packages/hurd.scm (hurd)[inputs]: Remove hurd-rc-script.
[arguments]: Do not substitute it. Update "runsystem.sh" to parse kernel
arguments and exec into --system=SYSTEM/rc.
(hurd-rc-script): Move to...
* gnu/services.scm (%hurd-rc-file): ...this new variable.
(hurd-rc-entry): New procedure.
(%hurd-startup-service): Use it in new variable.
* gnu/system.scm (hurd-default-essential-services): Use it.
* gnu/system.scm (operating-system-etc-service): Cater for missing nsswitch
and missing sudoers-file. For the Hurd, add "login" and "motd".
(hurd-default-essential-services): Add operating-system-etc-service.
* gnu/build/activation.scm (boot-time-system): Use "command-line" for the
Hurd.
* gnu/system.scm (hurd-default-essential-services): Add %boot-service and
%activation-service.
* gnu/system.scm (kernel->boot-label): Add keyword parameter 'hurd'. If set,
use it for label.
(operating-system-default-label): Call with it with operating-system-hurd.
* gnu/system.scm (<boot-parameters>)[multiboot-modules]: New field.
(read-boot-parameters): Initialize it.
(operating-system-multiboot-modules, hurd-multiboot-modules): New procedure.
(operating-system-boot-parameters): Cater for multiboot the Hurd and
initialize it; avoid initrd in that case.
(operating-system-kernel-file): Cater for for Gnumach (the Hurd) besides Linux.
(boot-parameters->menu-entry): Use it to support a multiboot <menu-entry>.
Following discussion in <https://issues.guix.gnu.org/37305>, it seems more
appropriate to give the parameter a more generic name that better describes
what it does.
* gnu/bootloader/grub.scm (normalize-file): Rename the
BTRFS-SUBVOLUME-FILE-NAME parameter to STORE-DIRECTORY-PREFIX, and always
assume this argument to be a string.
(eye-candy): Likewise. Default STORE-DIRECTORY-PREFIX to "".
(grub-configuration-file): Likewise.
* gnu/system.scm (operating-system-bootcfg): Adapt.
* gnu/bootloader/grub.scm (strip-mount-point): Remove procedure.
(normalize-file): Add procedure.
(grub-configuration-file): New BTRFS-SUBVOLUME-FILE-NAME parameter. When
defined, prepend its value to the kernel and initrd file names, using the
NORMALIZE-FILE procedure. Adjust the call to EYE-CANDY to pass the
BTRFS-SUBVOLUME-FILE-NAME argument. Normalize the KEYMAP file as well.
(eye-candy): Add a BTRFS-SUBVOLUME-FILE-NAME parameter, and use it, along with
the NORMALIZE-FILE procedure, to normalize the FONT-FILE and IMAGE nested
variables. Adjust doc.
* gnu/bootloader/depthcharge.scm (depthcharge-configuration-file): Adapt.
* gnu/bootloader/extlinux.scm (extlinux-configuration-file): Likewise.
* gnu/system/file-systems.scm (btrfs-subvolume?)
(btrfs-store-subvolume-file-name): New procedures.
* gnu/system.scm (operating-system-bootcfg): Specify the Btrfs
subvolume file name the store resides on to the
`operating-system-bootcfg' procedure, using the new
BTRFS-SUBVOLUME-FILE-NAME argument.
* doc/guix.texi (File Systems): Add a Btrfs subsection to document the use of
subvolumes.
* gnu/tests/install.scm (%btrfs-root-on-subvolume-os)
(%btrfs-root-on-subvolume-os-source)
(%btrfs-root-on-subvolume-installation-script)
(%test-btrfs-root-on-subvolume-os): New variables.
This is said to avoid a race with the usbhid kernel module.
See <https://issues.guix.gnu.org/35574#18>.
* gnu/system.scm (%default-modprobe-blacklist): Blacklist it.
This avoids a race with the bcm5974 kernel module.
Fixes <https://bugs.gnu.org/35574>.
* gnu/system.scm (%default-modprobe-blacklist): New variable.
(<operating-system>)[kernel-arguments]: Default to ...
(%default-kernel-arguments): ... this new variable.
* doc/guix.texi (operating-system Reference): Document the change.
Mathieu Othacehe
Maxim Cournoyer
raid5atemyhomework
Maxime Devos
Ludovic Courtès
Miguel Ángel Arruga Vivas
Mikhail Tsykalov
Efraim Flashner
Jan (janneke) Nieuwenhuizen
Stefan
Brice Waegeneire
Royce Strange
Marius Bakke
Mathieu Othacehe
Florian Pelz