Rationale: It is only used in INSTALLATION-OS and doesn't make sense to be
used in another context, given that file systems now automatically pull their
dependencies since commit 45eac6cdf5 (services:
Add file system utilities to profile).
* gnu/system.scm (%base-packages-disk-utilities): Deprecate and rename to...
* gnu/system/install.scm (%installer-disk-utilities): ... this.
(installation-os) [packages]: Adjust accordingly.
* gnu/system/images/pine64.scm (pine64-barebones-os) [services]: Add
dhcp-client-service-type and ntp-service-type to the list of services.
[packages]: Add nss-certs to the list of packages.
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
Rationale: It is only used in INSTALLATION-OS and doesn't make sense to be
used in another context, given that file systems now automatically pull their
dependencies since commit 45eac6cdf5 (services:
Add file system utilities to profile).
* gnu/system.scm (%base-packages-disk-utilities): Deprecate and rename to...
* gnu/system/install.scm (%installer-disk-utilities): ... this.
(installation-os) [packages]: Adjust accordingly.
* gnu/packages/raspberry-pi.scm (grub-efi-bootloader-chain-raspi-64): New
bootloader variable, capable to boot a Raspberry Pi over network or from a
local storage.
* gnu/system/examples/raspberry-pi-64.tmpl: New operating-system example.
* gnu/system/examples/raspberry-pi-64-nfs-root.tmpl: New operating-system
example for booting over network.
* Makefile.am (EXAMPLES): Register the new files.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Cross-building a docker image with:
$ guix system image --image-type=docker --target=aarch64-linux-gnu os.scm
results in an image where the architecture declared in its config.json is
the host architecture rather than the target one. The binaries are
correctly cross-compiled, so the image can be loaded and used despite the
warning message shown by docker:
$ docker load -i vcal7bvsqcijchifhqdvprpd1niqh8sk-docker-image.tar.gz
Loaded image: guix:latest
$ docker create guix:latest
WARNING: The requested image's platform (linux/amd64) does not match the
detected host platform (linux/arm64/v8) and no specific platform was
requested
40f06aa869ed690489c4a3824a7f7721bd4bf453b85f25ac7199266939fe2fba
$ echo $?
0
This is fixed by passing the correct triplet to the build-docker-image
function.
* gnu/system/image.scm (system-docker-image) Add ‘image-target’ variable.
[builder]: Pass ‘#:system’ argument to ‘build-docker-image’.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Make the operating-system field mandatory as creating an image without it
makes no sense. Introduce a new macro, image-without-os for the specific cases
where the image is only created to be inherited from afterwards.
* gnu/image.scm (<image>)[operating-system]: Make it mandatory.
* gnu/system/image.scm (image-without-os): New macro.
(efi-disk-image, efi32-disk-image, iso9660-image, docker-image,
raw-with-offset-disk-image): Use it.
* gnu/system/images/hurd.scm (hurd-disk-image): Ditto.
Running the following command where my-pine.scm contains an operating-system
declaration:
guix system image --image-type=pine64-raw my-pine.scm
returns:
guix system: error: package linux-libre-arm64-generic@5.18.19 does not support
x86_64-linux
That's because there's no platform defined in the pine64-raw image-type, hence
the guix system image tries to build the image for the host architecture.
* gnu/system/images/novena.scm (novena-image-type): Use the armv7-linux platform.
* gnu/system/images/pine64.scm (pine64-image-type): Use the aarch64-linux platform.
* gnu/system/images/pinebook-pro.scm (pinebook-pro-image-type): Use the aarch64-linux platform.
* gnu/system/images/rock64.scm (rock64-image-type): Use the aarch64-linux platform.
* gnu/system/linux-container.scm (container-script): Accept command line
options to bind mount host directories into the container.
* doc/guix.texi (Invoking guix system): Document options.
* gnu/system/examples/vm-image.tmpl: Use the 'GUIX_DISPLAYED_VERSION'
environment variable in 'label'.
* gnu/system/install.scm (%installation-os): Likewise.
* Makefile.am (release): Set 'GUIX_DISPLAYED_VERSION'.
Fixes <https://issues.guix.gnu.org/53210>.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
* gnu/system/install.scm (%installation-services): Set 'guix' to
use (current-guix) in 'guix-configuration'.
* gnu/system/examples/vm-image.tmpl: Likewise.
* gnu/tests/install.scm (operating-system-with-current-guix): Remove.
(run-install, installation-os-for-gui-tests): Remove its uses.
* Makefile.am (release): Remove intermediate use of
'update-guix-package.scm' and subsequent 'git commit' invocation.
Previously, the default value would lead to a wrong-type-to-apply crash.
* gnu/system/image.scm (system-disk-image)[image-builder]: When
'partition-initializer' returns #f, fall back to
INITIALIZE-ROOT-PARTITION.
* gnu/tests/base.scm (run-root-unmount-test)[test-image]: Remove
'initializer' field of partition.
* gnu/image.scm (<partition>)[initializer]: Add comment.
Previously 'system-image' would return *unspecified* in that case,
leading to a wrong-type-arg error crash down the road.
* gnu/system/image.scm (system-image): Add 'else' clause.
* gnu/bootloader/grub.scm (grub-efi32-bootloader): New variable.
(install-grub-efi32): New variable.
* gnu/build/bootloader.scm (install-efi): Add a 'targets' keyword
argument.
(install-efi-loader): Likewise.
* gnu/build/image.scm (initialize-efi32-partition): New procedure.
* gnu/packages/bootloaders.scm (grub-efi32): New variable.
* gnu/system/image.scm (esp32-partition): New variable
(efi32-disk-image): New variable.
(efi32-raw-image-type): New variable.
(system-disk-image)[partition-image]: Set '#:grub-efi32' when
calling the partition initializer.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Fixes <https://issues.guix.gnu.org/55806>.
* gnu/system/install.scm (%installation-services): Refactor into a
procedure, so that it can capture the system it's installing for.
Conditionally add uvesafb-service-type based on whether v86d is
supported by the target architecture.
(installation-os)[services]: Use the %installation-service procedure.
(uvesafb-shepherd-service): Remove %host-type checks.
Signed-off-by: Florian Pelz <pelzflorian@pelzflorian.de>
* gnu/build/image.scm (make-vfat-image): Pass fs-bits as an argument and force
1kb logical sector size only if "ESP" flag is set.
(make-partition-image): Add "fat32" partition type, support explicit "fat16"
type with vfat alias.
* gnu/system/image.scm (partition->dos-type partition): Return file system IDs
for "fat16" and "fat32" partitions.
(partition->gpt-type partition): Ditto.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/build/image.scm (sexp->partition): Add flags support.
* gnu/system/image.scm (partition->gexp): Ditto.
(system-disk-image): Set the genimage bootable flag if it is part of the
partition flags.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
This makes sure warnings like "incompatible bytecode version" don't go
through when looking for (guix store).
* gnu/system/file-systems.scm (%store-prefix): Parameterize
'current-warning-port' around 'resolve-module' call.
Fixes <https://issues.guix.gnu.org/54770>.
Regression introduced in 400c9ed3d7.
Previously, for an encrypted /home (say), "cryptsetup open" would be
invoked by shepherd, with /dev/null as its standard input. It would
thus run in non-interactive mode and, instead of asking for a
passphrase, fail with:
Nothing to read on input.
This change ensures it runs in interactive mode.
* gnu/build/file-systems.scm (system*/console, system*/tty): New
procedures.
* gnu/system/mapped-devices.scm (open-luks-device): Use 'system*/tty'
instead of 'system*'.
* gnu/system/images/novena.scm (novena-barebones-os)[kernel]: Use the
linux-libre-arm-generic kernel.
[initrd-modules]: Do not specify any modules as sdhci-esdhc-imx, ahci_imx and
i2c-dev are built-in in the arm-generic kernel.
This is to make it less surprising, given the common convention sets forth by
the kernel Linux command-line parameters.
* gnu/build/linux-boot.scm (boot-system): Rename '--load', '--repl', '--root'
and '--system' to 'gnu.load', 'gnu.repl', 'root' and 'gnu.system',
respectively. Adjust doc.
(find-long-option): Adjust doc.
* gnu/installer/parted.scm (installer-root-partition-path): Adjust accordingly.
* gnu/system.scm (bootable-kernel-arguments): Add a VERSION argument and
update doc. Use VERSION to conditionally return old style vs new style initrd
arguments.
(%boot-parameters-version): Increment to 1.
(operating-system-boot-parameters): Adjust doc.
(operating-system-boot-parameters-file): Likewise.
* gnu/system/linux-initrd.scm (raw-initrd, base-initrd): Likewise.
* doc/guix.texi: Adjust doc.
* gnu/build/activation.scm (boot-time-system): Adjust accordingly.
* gnu/build/hurd-boot.scm (boot-hurd-system): Likewise.
* gnu/packages/commencement.scm (%final-inputs-riscv64): Adjust comment.
* gnu/packages/patches/linux-pam-unix_chkpwd.patch: New file.
* gnu/local.mk (dist_patch_DATA): Add it.
* gnu/packages/linux.scm (linux-pam): Use it.
* gnu/system/pam.scm (pam-root-service-type): Add unix_chkpwd to setuid.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
These changes broke the creation of the 'linux-modules-database' for all kernel
series besides 5.15, 5.4, and 5.10, like this:
------
gnu/build/linux-modules.scm:257:5: kernel module not found "framebuffer_coreboot" "/gnu/store/yff45fr6q93mw44zdql9ffr95zcvwxcn-linux-libre-4.9.299/lib/modules"
------
We should support the coreboot framebuffer, but we need to test that change more
completely before deploying it.
This effectively reverts the following commits:
1dfe8c3721 "gnu: linux-libre: Build simplefb into all x86{,_64} kernels."
bc09e7ab56 "gnu: linux-libre: Support the Coreboot framebuffer."
Fixes <https://issues.guix.gnu.org/52667> "System reconfiguration fails to build
linux-modules.drv".
This is a follow-up to 49599fab56.
Fixes: <https://issues.guix.gnu.org/52908>.
* gnu/services/xorg.scm (set-xorg-configuration)[login-manager-service-type]:
When the current system or target system begins with the string "x86_64", use
gdm-service-type as before; otherwise, use sddm-service-type.
* gnu/system/examples/vm-image.tmpl (services): Add sddm-service-type to the
list of service types to remove.
* gnu/system/examples/desktop.tmpl: Only use gnome-desktop-service-type and
the default login manager in set-xorg-configuration when the target system is
x86_64.
Fixes <https://issues.guix.gnu.org/52539>.
Reported by Jacob First <jacob.first@member.fsf.org>.
* gnu/build/accounts.scm (allocate-passwd): Add comment as to why
'real-name' is taken from PREVIOUS. Add (not system?) to the
condition.
* gnu/system.scm (operating-system-etc-service) <login.defs>: Add
"CHFN_RESTRICT".
* gnu/system.scm (%setuid-programs): Add "chfn".
* gnu/system/pam.scm (base-pam-services): Add "chfn".
* doc/guix.texi (User Accounts): Document it.
This attempts to mitigate <https://issues.guix.gnu.org/52667>.
It makes linux-libre@5.15 consistent with older versions which do not
support a modular simplefb, allowing a single %base-initrd-modules
simple list for all of them.
Unlike CONFIG_FB_SIMPLE=m, CONFIG_FB_SIMPLE=y conflicts with
CONFIG_DRM_SIMPLEDRM, so the latter is now disabled. Let us hope it is
not missed.
* gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Unset CONFIG_DRM_SIMPLEDRM to build in CONFIG_FB_SIMPLE=y.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Remove "simplefb".
This code duplicates the (gnu system image) and (gnu build image) code. Using
VM for image generation is not needed, not portable and really slow. Remove
all the VM image generation code to make sure that only the image API is used.
* gnu/build/vm.scm: Remove it. Move the qemu-command procedure to ...
* gnu/build/marionette.scm: ... here.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it.
* tests/modules.scm: Ditto.
* gnu/tests/install.scm: Ditto.
* gnu/system/vm.scm: Adapt it and remove expression->derivation-in-linux-vm,
qemu-img, system-qemu-image/shared-store and system-docker-image procedures.
* doc/guix.texi (G-Expressions): Adapt it.
Also add a volatile? argument to the virtual-machine record. When volatile? is
true generate a QEMU script that mounts an overlay on top of a read only
storage. When volatile? is false, use a persistent, read-write storage.
* gnu/system/vm.scm (common-qemu-options): Add a rw-image? argument to use a
persistent storage.
(system-qemu-image/shared-store-script): Add a volatile? argument and honor
it. Use the image API to build the QEMU image.
(<virtual-machine>)[volatile?]: New field.
(virtual-machine-compiler): Pass the volatile? argument to the
system-qemu-image/shared-store-script procedure.
Without this, the kernel cannot write to the display until the
full-featured driver module (often i915) is loaded from the root file
system.
If the root file system is encrypted, the initrd's passphrase prompt
won't make it to the screen, and the fully responsive system will appear
frozen whilst waiting for user input.
* gnu/packages/aux-files/linux-libre/4.4-i686.conf,
gnu/packages/aux-files/linux-libre/4.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Mark simple framebuffers as generic system ones and enable ‘Google’
firmware drivers to enable Coreboot table support and its dependent
framebuffer driver module.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Add the framebuffer_coreboot and simplefb modules on x86 systems.
* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (%qemu-static-networking): New variable.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
* gnu/system/vm.scm (common-qemu-options): Remove the "-vga std" argument that
is the default since QEMU 2.2.
Suggested-by: Attila Lendvai <attila@lendvai.name>
It configures QEMU to use the tty it was started in for IO (as opposed to
opening a separate graphical window). This enables copy-pasting and
scrollback. Exit QEMU with C-a x.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Also add the
'-nographic' QEMU argument when called with #:graphic? #false.
* guix/scripts/system.scm (system-derivation-for-action): Propagate
the #:graphic? keyword arg.
(perform-action): Add and propagate the #:graphic? keyword arg.
(show-help): Add --no-graphic CLI arg.
(%options): Process the new --no-graphic CLI arg.
(process-action): Feed in the CLI arg through the #:graphic? keyword arg.
* doc/guix.texi (Invoking guix system): Add example to combine guix system and
invoking the vm start script into one command. Split the description of the
various options into separate paragraphs. Add a paragraph to describe
--no-graphic.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
'qemu-minimal' is enough for system tests, which is the main (only?) use
of <virtual-machine>.
* gnu/system/vm.scm (<virtual-machine>)[qemu]: Default to QEMU-MINIMAL.
Fixes <https://issues.guix.gnu.org/51425>.
Reported by Jonathan Brielmaier <jonathan.brielmaier@web.de>.
* gnu/system/file-systems.scm (invalid-file-system-flags)
(%validate-file-system-flags): New procedures.
(validate-file-system-flags): New macro.
(<file-system>)[flags]: Add 'sanitize' property.
Fixes regression introduced in d5073fd113,
whereby childhurd dependencies such as 'hurd' would erroneously be
attempted to build natively on x86_64-linux.
* gnu/system/images/hurd.scm (hurd-disk-image)[platform]: New field.
Let this be a warning against—even cautiously and deliberately—using
double negatives. You shall stare, but you shall not see.
* gnu/system/file-systems.scm (<file-system>): Fix the default
skip-check-if-clean? value to match the documentation and the intention.
It was never guaranteed to be run for non-root file systems. It was for
root file systems only due to a bug now fixed.
* gnu/build/file-systems.scm (check-btrfs-file-system): Don't invoke
‘btrfs device scan’ here.
* gnu/system/linux-initrd.scm (raw-initrd): Do so here if any btrfs file
systems are present.
* gnu/build/file-systems.scm (check-ext2-file-system)
(check-bcachefs-file-system, check-btrfs-file-system)
(check-fat-file-system, check-jfs-file-system, check-f2fs-file-system)
(check-ntfs-file-system, check-file-system): Take and honour new FORCE?
and REPAIR arguments. Update the docstring. Adjust all callers.
* gnu/system/file-systems.scm <file-system>: Add new SKIP-CHECK-IF-CLEAN?
and REPAIR fields.
(file-system->spec, spec->file-system): Adjust accordingly.
* gnu/build/linux-boot.scm (mount-root-file-system): Take new
SKIP-CHECK-IF-CLEAN? and REPAIR keyword arguments. Thread them through
to CHECK-FILE-SYSTEM.
* doc/guix.texi (File Systems): Document both new <file-system> options.
* gnu/system/pam.scm (unix-pam-service): Add account and session PAM entries
for pam-gnupg. Don't pass "#f" to "allow-root?" argument, because "lambda*"
already does this by default.
* doc/guix.texi (X Window): Document this.
* gnu/services/xorg.scm (<slim-configuration>)[gnupg?]: New record field.
(slim-pam-service): Pass "#:gnupg?" argument to "unix-pam-service".
This is a followup to a7ac19851b.
* gnu/system/install.scm (installation-os)[setuid-programs]: Use
'setuid-program'.
* gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'.
Thanks to Guillem Jover <guillem@debian.org> on the OFTC's #debian-dpkg
channel for helping with troubleshooting.
Letting GNU Tar recursively walk the complete files hierarchy side-steps the
risks associated with providing a list of file names:
1. Duplicated files in the archive (recorded as hard links by GNU Tar)
2. Missing parent directories.
The above would cause dpkg to malfunction, for example by aborting early and
skipping triggers when there were missing parent directories.
* guix/scripts/pack.scm (self-contained-tarball/builder): Do not call
POPULATE-SINGLE-PROFILE-DIRECTORY, which creates extraneous files such as
/root. Instead, call POPULATE-STORE and INSTALL-DATABASE-AND-GC-ROOTS
individually to more precisely generate the file system. Replace the list of
files by the current directory, "." and streamline the way options are passed.
* gnu/system/file-systems.scm (reduce-directories): Remove procedure.
* tests/file-systems.scm ("reduce-directories"): Remove test.
Tar translate duplicate files in the archive into hard links. These can cause
problems, as not every tool support them; for example dpkg doesn't.
* gnu/system/file-systems.scm (reduce-directories): New procedure.
(file-prefix?): Lift the restriction on file prefix. The procedure can be
useful for comparing relative file names. Adjust doc.
(file-name-depth): New procedure, extracted from ...
(btrfs-store-subvolume-file-name): ... here.
* guix/scripts/pack.scm (self-contained-tarball/builder): Use
reduce-directories.
* tests/file-systems.scm ("reduce-directories"): New test.
Inspired by
1270b2e209.
The price to pay is about 5% of a CPU core usage in the guest in the worst
scenario.
* gnu/system/examples/vm-image.tmpl
(auto-update-resolution-crutch): New mcron job.
[services]: Extend the mcron-service with it.
Having 2.29 is most likely no longer justified. Removing it reduces the
closure size returned by:
guix size $(guix system build gnu/system/install.scm)
from 1.6G to 1.5G.
* gnu/system/locale.scm (%default-locale-libcs): Remove GLIBC-2.29.
Fixes <https://issues.guix.gnu.org/47225>.
* gnu/system/vm.scm (%default-msize-value): New variable.
(%linux-vm-file-systems): Use it as the value of the msize option.
(mapping->file-system): Likewise.
Reported-by: Leo Famulari <leo@famulari.name>
Some services require networking, I'm looking at the Guix Build Coordinator
agent. Networking seems to work in the childhurd VM, so I think this change
makes sense.
* gnu/system/hurd.scm (%base-services/hurd): Add 'networking to the provision
parameter for the static-networking service.
Remove the 'vm-image' command that has been superseded by the 'image'
command.
* gnu/system/vm.scm (system-qemu-image): Remove it.
* guix/scripts/system.scm (system-derivation-for-action): Mark 'vm-image'
command as deprecated and use the image API to produce the VM image.
(perform-action, show-help): Adapt accordingly.
* tests/guix-system.sh: Ditto.
* doc/guix.texi (Invoking guix system,
Running Guix in a VM): Ditto.
* etc/completion/fish/guix.fish: Ditto.
* etc/completion/zsh/_guix: Ditto.
* gnu/system/shadow.scm (account-activation): Delete duplicate (eq?) users
and groups before transforming them to specs and asserting, that names are
unique.
The change from formatted message causes the line to no longer automatically
be ended. This will need to be reverted once again, when duplicate names
become hard errors.
* gnu/system/shadow.scm (assert-unique-account-names)
(assert-unique-group-names): End format strings in ~%.
This reverts commit a3002104a8, which
breaks certain system configurations like:
$ guix system reconfigure config.scm
guix system: error: the following groups appear more than once: lp
*gnu/system/shadow.scm (find-duplicates): New variable.
(assert-unique-account-names, assert-unique-group-names): New variables.
(account-activation): Use them here.
Until now deduplication was performed as an additional pass after
copying files, which involve re-traversing all the files that had just
been copied.
* guix/store/deduplication.scm (copy-file/deduplicate): New procedure.
* tests/store-deduplication.scm ("copy-file/deduplicate"): New test.
* guix/build/store-copy.scm (populate-store): Add #:deduplicate?
parameter and honor it.
* tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f
to 'populate-store'.
* gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate?
to 'populate-store'. Pass #:deduplicate? #f to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
* gnu/build/install.scm (populate-single-profile-directory): Pass
#:deduplicate? #f to 'populate-store'.
* gnu/build/linux-initrd.scm (build-initrd): Likewise.
* guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New
procedure.
[build]: Pass it as an argument to 'source-module-closure'.
* guix/scripts/pack.scm (squashfs-image)[build]: Wrap in
'with-extensions'.
* gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New
procedure.
[builder]: Pass it to 'source-module-closure'.
* gnu/system/install.scm (cow-store-service-type)[import-module?]: New
procedure. Pass it to 'source-module-closure'.
* gnu/system/linux-initrd.scm (file-system-packages): Add
bcachefs-tools/static.
(file-system-type-modules): Add an entry for the "bcachefs" type and
module.
Maxim Cournoyer
Gabriel Wicki
Stefan
Ricardo Wurmus
Ludovic Courtès
Hilton Chain
Thiago Jung Bauermann
Tobias Geerinckx-Rice
Mathieu Othacehe
Alex Griffin
Marius Bakke
Antero Mejr
Oleg Pykhalov
Denis 'GNUtoo' Carikli
Josselin Poiret
Pavel Shlyak
Efraim Flashner
Andrew Tropin
Leo Famulari
Chris Marusich
Tobias Geerinckx-Rice via Guix-patches via
Attila Lendvai
Ryan Sundberg
Christopher Lemmer Webber
Christopher Baines
Caliph Nomble
Leo Prikler
Jonathan Brielmaier