When debugging the installation tests, it can be very handy to be able to read
"guix system init" command output.
* gnu/installer/final.scm (install-system): Dump installation command output
to the console when running the installation tests.
When debugging the installation tests, it can be very handy to be able to read
"run-command" output, for instance when executing "guix system init".
Introduce a new "invoke-with-log" procedure that is able to log a command
standard and error outputs to the syslog. Use it, only when running the
installation tests, to dump "run-command" output.
* gnu/installer/utils.scm (open-pipe-with-stderr, invoke-with-log): New
procedures,
(invoke-log-port): new variable,
(run-command): move to the end of the file and use invoke-with-log when
running the installation tests.
Issue reported by SergioBG here:
https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00432.html.
Due to default buffering mode, the installer was reading from the pipe without
having actually written a command before.
* gnu/installer/connman.scm (connman-connect-with-auth): Set pipe buffering
mode to 'line.
According to glibc manual, locale are under the following form:
language[_territory[.codeset]][@modifier]
The esperanto locale "epo" does not have a territory. Modify run-command to
take this into account.
Reported by Alex Sassmannshausen here:
https://lists.gnu.org/archive/html/guix-devel/2020-04/msg00192.html.
* gnu/installer/utils.scm (run-command): Handle locale without territory such
as "epo".
Previously for Azerbaijani, no Latin layout but only the Cyrillic variant
could be selected.
* gnu/installer/newt/keymap.scm (add-empty-variant): New procedure.
(run-keymap-page): Use it to insert an empty variant.
* gnu/installer/proxy.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer/newt/parameters.scm (run-proxy-page): New procedure,
(run-parameters-page): add the previous procedure to the parameters menu.
* gnu/installer/newt/page.scm (run-input-page): Remove component argument that
is not longer passed to the procedure passed to 'add-component-callback',
(run-listbox-selection-page): ditto.
* gnu/installer/newt/user.scm (run-user-add-page): Ditto,
(run-user-add-page): ditto.
* gnu/installer/newt/help.scm: New file.
* gnu/local.mk (INSTALLER_MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* gnu/installer/record.scm (<installer>): Add 'help-menu' and 'help-page'
fields,
(installer-help-menu, installer-help-page): new exported procedures.
* gnu/installer/newt.scm (init): Set the help line,
(help-menu, help-page): new procedures used ...
(newt-installer): ... here.
* gnu/installer/newt/keymap.scm (run-layout-page): Add a context argument to
differenciate the help context from the main one,
(run-keymap-page): add a context argument and pass it to run-layout-page.
* gnu/installer.scm (compute-keymap-step): Add a context argument and pass it
to 'installer-keymap-page',
(installer-steps): set the help menu and pass the appropriate context to
compute-keymap-step calls,
(guile-newt): update to revision 2.
* gnu/installer/tests.scm (choose-services): Turn desktop-environments list
into a choose-desktop-environment procedure. This way, it is easier to select
all desktop-environments or none, in the same way as choose-network-service?
and choose-network-management-tool? arguments.
This fixes <https://bugs.gnu.org/39712>.
The guix-daemon was preventing the cow-store umount, so restart it. Some
udevd workers, using cow-store files might also still be around, so have some
umount retries.
* gnu/installer/final.scm (kill-cow-users): New procedure,
(umount-cow-store): restart guix-daemon and kill all processes started from
within the cow-store before trying to umount the store overlay. Also try 5
times to umount the overlay in case it is still busy.
* gnu/installer/utils.scm (run-shell-command): Rename to...
(run-command): Remove call to 'call-with-temporary-output-file' and hop
through Bash. Expect COMMAND to be a list of strings rather than a
string.
* gnu/installer/final.scm (install-system): Turn INSTALL-COMMAND into a
list of strings and pass it to 'run-command'.
* gnu/installer/newt/page.scm (edit-file): Likewise.
This is useful for automated tests.
* gnu/installer/newt/network.scm (wait-service-online)[online?]: New
procedure. Check for /tmp/installer-assume-online.
Use it instead of 'connman-online?'.
This will allow us to automate testing of the installer.
* gnu/installer/utils.scm (%client-socket-file)
(current-server-socket, current-clients): New variables.
(open-server-socket, call-with-server-socket): New procedure.
(with-server-socket): New macro.
(run-shell-command): Add call to 'send-to-clients'. Select on both
current-input-port and current-clients.
* gnu/installer/steps.scm (run-installer-steps): Wrap 'call-with-prompt'
in 'with-socket-server'. Call 'sigaction' for SIGPIPE.
* gnu/installer/newt/page.scm (watch-clients!, close-port-and-reuse-fd)
(run-form-with-clients, send-to-clients): New procedures.
(draw-info-page): Add call to 'run-form-with-clients'.
(run-input-page): Likewise. Handle EXIT-REASON equal to 'exit-fd-ready.
(run-confirmation-page): Likewise.
(run-listbox-selection-page): Likewise. Define 'choice->item' and use it.
(run-checkbox-tree-page): Likewise.
(run-file-textbox-page): Add call to 'run-form-with-clients'. Handle
'exit-fd-ready'.
* gnu/installer/newt/partition.scm (run-disk-page): Pass
#:client-callback-procedure to 'run-listbox-selection-page'.
* gnu/installer/newt/user.scm (run-user-page): Call
'run-form-with-clients'. Handle 'exit-fd-ready'.
* gnu/installer/newt/welcome.scm (run-menu-page): Define
'choice->item' and use it. Call 'run-form-with-clients'.
* gnu/installer/newt/final.scm (run-install-success-page)
(run-install-failed-page): When (current-clients) is non-empty, call
'send-to-clients' without displaying a choice window.
* gnu/installer/newt/final.scm (run-install-failed-page): Propose between
installer resume or restart. Do actually resume the installation by raising an
&installer-step-abort condition if "Resume" button is pressed. Otherwise, keep
going as the installer will be restarted by login.
* gnu/installer.scm (installer-program): Remove the associated TODO comment.
Fixes <https://issues.guix.info/issue/39217>.
Fixes <https://issues.guix.info/issue/38447>.
* gnu/installer/final.scm (umount-cow-store): New procedure ...,
(install-system): ... used here, to remove the store overlay so that the
target device is not seen as busy during further umount calls.
Fixes <https://bugs.gnu.org/38562>.
Reported by Brice Waegeneire <brice@waegenei.re>.
Previously, pressing F12 or shift-F2 in one of those forms would cause
it to exit, usually with the default value #t because the caller had not
provided a useful hotkey "callback".
* gnu/installer/newt/page.scm (run-input-page, run-confirmation-page)
(run-listbox-selection-page, run-checkbox-tree-page)
(run-file-textbox-page): Pass #:flags FLAG-NOF12 to 'make-form'.
Fixes <https://bugs.gnu.org/39199>.
Reported by Jonathan Brielmaier <jonathan.brielmaier@web.de>.
* gnu/installer/newt/page.scm (run-file-textbox-page): Move 'loop' to
the beginning of the body. Do not call 'loop' from the 'dynamic-wind'
exit handler as we would not return the value of the second call to
'loop'.
Fixes <https://bugs.gnu.org/36885>.
Reported by <lukasbf@tutanota.com>.
* gnu/installer/newt/page.scm (edit-file): New procedure.
(run-file-textbox-page): Add #:edit-button? and #:editor-locale
parameters. Remove 'file-text' and add 'edit-button', and add it
to the horizontal stacked grid when EXIT-BUTTON? is true. Wrap
body in 'loop'. Handle case where ARGUMENT is EDIT-BUTTON by calling
'loop'.
* gnu/installer/newt/final.scm (run-config-display-page): Add #:locale
parameter. Pass #:edit-button? and #:editor-locale to
'run-file-textbox-page'.
(run-final-page): Pass LOCALE to 'run-config-display-page'.
* gnu/installer/newt/partition.scm (run-fs-type-page): Add ‘jfs’ to the
list box.
* gnu/installer/parted.scm (user-fs-type-name, user-fs-type->mount-type)
(partition-filesystem-user-type): Add ‘jfs’ mapping
(create-jfs-file-system): New procedure.
(format-user-partitions): Use it.
* gnu/installer.scm (set-installer-path): Add jfsutils.
* gnu/installer/parted.scm (data-partition?, metadata-partition?,
freespace-partition?, normal-partition?, extended-partition?,
logical-partition?): Remove, as now provided by Guile-Parted.
* gnu/installer/newt/partition.scm (run-disk-page): Remove disk-destroy calls,
replace disk-delete-all by disk-remove-all-partitions and
disk-delete-partition by disk-remove-partition*.
This fixes 55c43108 commit that renamed input-hide-checkbox? into
input-visibility-checkbox?.
* gnu/installer/newt/partition.scm (prompt-luks-passwords): Rename
input-hide-checkbox? into input-visibility-checkbox?.
* gnu/installer/newt/user.scm (run-user-add-page): Change the input
visibility checkbox's text to ‘Show’, and default to unchecked.
* gnu/installer/newt/page.scm (run-input-page): Likewise.
Rename INPUT-HIDE-CHECKBOX? argument to INPUT-VISIBILITY-CHECKBOX?.
Guile-JSON 3.x is incompatible with Guile-JSON 1.x, which we relied on
until now: it maps JSON dictionaries to alists (instead of hash tables),
and JSON arrays to vectors (instead of lists). This commit is about
adjusting all the existing code to this new mapping.
* m4/guix.m4 (GUIX_CHECK_GUILE_JSON): New macro.
* configure.ac: Use it.
* doc/guix.texi (Requirements): Mention the Guile-JSON version.
* guix/git-download.scm (git-fetch)[guile-json]: Use GUILE-JSON-3.
* guix/import/cpan.scm (string->license): Expect vectors instead of
lists.
(module->dist-name): Use 'json-fetch' instead of 'json-fetch-alist'.
(cpan-fetch): Likewise.
* guix/import/crate.scm (crate-fetch): Likewise, and call 'vector->list'
for DEPS.
* guix/import/gem.scm (rubygems-fetch): Likewise.
* guix/import/json.scm (json-fetch-alist): Remove.
* guix/import/pypi.scm (pypi-fetch): Use 'json-fetch' instead of
'json-fetch-alist'.
(latest-source-release, latest-wheel-release): Call 'vector->list' on
RELEASES.
* guix/import/stackage.scm (stackage-lts-info-fetch): Use 'json-fetch'
instead of 'json-fetch-alist'.
(lts-package-version): Use 'vector->list'.
* guix/import/utils.scm (hash-table->alist): Remove.
(alist->package): Pass 'vector->list' on the inputs fields, and default
to the empty vector.
* guix/scripts/import/json.scm (guix-import-json): Remove call to
'hash-table->alist'.
* guix/swh.scm (define-json-reader): Expect pair? or null? instead of
hash-table?.
[extract-field]: Use 'assoc-ref' instead of 'hash-ref'.
(json->branches): Use 'map' instead of 'hash-map->list'.
(json->checksums): Likewise.
(json->directory-entries, origin-visits): Call 'vector->list' on the
result of 'json->scm'.
* tests/import-utils.scm ("alist->package with dependencies"): New test.
* gnu/installer.scm (build-compiled-file)[builder]: Use GUILE-JSON-3.
* gnu/installer.scm (installer-program)[installer-builder]: Likewise.
* gnu/installer/locale.scm (iso639->iso639-languages): Use 'assoc-ref'
instead of 'hash-ref', and pass vectors through 'vector->list'.
(iso3166->iso3166-territories): Likewise.
* gnu/system/vm.scm (system-docker-image)[build]: Use GUILE-JSON-3.
* guix/docker.scm (manifest, config): Adjust for Guile-JSON 3.
* guix/scripts/pack.scm (docker-image)[build]: Use GUILE-JSON-3.
* guix/import/github.scm (fetch-releases-or-tags): Update docstring.
(latest-released-version): Use 'assoc-ref' instead of 'hash-ref'. Pass
the result of 'fetch-releases-or-tags' to 'vector->list'.
* guix/import/launchpad.scm (latest-released-version): Likewise.
Fixes <http://bugs.gnu.org/36008>.
Suggested by Giovanni Biscuolo <g@xelera.eu>.
* gnu/installer/services.scm (%system-services) <"i3">: Add i3status,
dmenu, and st.
Fixes <https://bugs.gnu.org/36099>.
Reported by Jonathan Brielmaier <jonathan.brielmaier@web.de>.
* gnu/installer/parted.scm (initrd-configuration): Add
%BASE-INITRD-MODULES to the 'initrd-modules' field.
This fixes https://issues.guix.gnu.org/issue/35622.
* gnu/installer/connman.scm (<service>): Mention that name may be false.
* gnu/installer/newt/wifi.scm (wifi-services): Filter out wifi services
without name.
Co-authored by: Pierre Neidhardt <mail@ambrevar.xyz>
Fixes <https://bugs.gnu.org/35783>.
This is a followup to 7d567af46b.
* gnu/installer/parted.scm (auto-partition!): Append ESP-PARTITION, when
it is true, to the result of 'create-adjacent-partitions!'.
* gnu/installer/newt/partition.scm (run-partioning-page): Remove
'initial-partitions' variable, and remove call to
'create-special-user-partitions'.
Co-authored-by: Mathieu Othacehe <m.othacehe@gmail.com>
Mathieu Othacehe
Mathieu Othacehe
Ludovic Courtès
Florian Pelz
Tobias Geerinckx-Rice