* gnu/system/vm.scm (qemu-image): When guessing the root-size, use a lower
bound of 20 MiB, otherwise the root file system size is sometimes 0 MiB in
size.
* gnu/system/uuid.scm (%fat32-uuid-rx): New variable.
(string->fat32-uuid): New procedure.
(%uuid-parsers): Add it.
* tests/uuid.scm ("uuid, FAT32, format preserved"): New test.
This makes collisions less likely than when using a label to look up the
partition. See <https://bugs.gnu.org/27735>.
* gnu/system/vm.scm (operating-system-uuid): New procedure.
(system-disk-image): Define 'root-uuid' and use it for the root file
system. Pass it to 'iso9660-image' and 'qemu-image'.
Conceptually a UUID is just a bytevector. However, there's software out
there such as GRUB that relies on the string representation of different
UUID types (e.g., the string representation of DCE UUIDs differs from
that of ISO-9660 UUIDs, even if they are actually bytevectors of the
same length). This new <uuid> record type allows us to preserve
information about the type of UUID so we can eventually convert it to a
string using the right representation.
* gnu/system/uuid.scm (<uuid>): New record type.
(bytevector->uuid): New procedure.
(uuid): Return calls to 'make-uuid'.
(uuid->string): Rewrite using 'match-lambda*' to accept a single 'uuid?'
argument.
* gnu/bootloader/grub.scm (grub-root-search): Check for 'uuid?' instead
of 'bytevector?'.
* gnu/system.scm (bootable-kernel-arguments): Check whether ROOT-DEVICE
is 'uuid?'.
(read-boot-parameters): Use 'bytevector->uuid' when the
store device is a bytevector.
(read-boot-parameters-file): Check for 'uuid?' instead of 'bytevector?'.
(device->sexp): New procedure.
(operating-system-boot-parameters-file): Use it for 'root-device' and
'store'.
(operating-system-bootcfg): Remove conditional in definition of
'root-device'.
* gnu/system/file-systems.scm (file-system->spec): Check for 'uuid?' on
DEVICE and take its bytevector.
* gnu/system/mapped-devices.scm (open-luks-device): Likewise.
* gnu/system/vm.scm (iso9660-image): Call 'uuid-bytevector' for the
#:volume-uuid argument.
* gnu/bootloader.scm (<bootloader-configuration>): Deprecate "device" field in
favor of "target" field. This is mostly a renaming but also a generalization
to support UEFI targets being paths to a mounted partition instead of a device
name.
* gnu/system/examples/bare-bones.tmpl:
* gnu/system/examples/desktop.tmpl:
* gnu/system/examples/lightweight-desktop.tmpl:
* gnu/system/examples/vm-image.tmpl:
* gnu/system/install.scm:
* gnu/tests.scm:
* gnu/tests/install.scm:
* gnu/tests/nfs.scm:
* tests/system.scm: Adapt all invocations of bootloader-configuration.
* guix/scripts/system.scm (perform-action): Rename device argument to
bootloader-target.
(process-action): Adapt caller.
* doc/guix.texi (Proceeding with the Installation):
* doc/guix.texi (Bootloader Configuration): Update documentation.
* gnu/bootloader/grub.scm (install-grub-efi): Fix grub-install invocation for
EFI systems.
* gnu/system/examples/bare-bones.tmpl: Use the newer
"bootloader-configuration" syntax.
* gnu/system/examples/desktop.tmpl: Use bootloader-configuration sytax. Also,
use the same label for the LUKS-mapped device and the root partition. Remove
unneeded "title" field for the file-system based on LUKS; as noted in the
manual, the "title" field is ignored for mapped devices.
* gnu/system/examples/lightweight-desktop.tmpl: Use bootloader-configuration,
and use grub-efi-bootloader.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Add
#:options parameter and honor it.
(<virtual-machine>): New record type.
(virtual-machine): New macro.
(port-forwardings->qemu-options, virtual-machine-compiler): New
procedures.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Add
#:single-file-output? and pass it to 'load-in-linux-vm'.
(iso9660-image): Pass #:single-file-output? to
'expression->derivation-in-linux-vm'.
* gnu/build/vm.scm (load-in-linux-vm): Add #:single-file-output? and
honor it.
* gnu/system/locale.scm (single-locale-directory): Use 'computed-file'
instead of 'gexp->derivation'.
(locale-directory): Adjust accordingly and do the same.
* gnu/system.scm (operating-system-directory-base-entries): Adjust
accordingly.
* gnu/build/vm.scm (initialize-hard-disk): Use "GuixSD" as label.
* gnu/system/install.scm (installation-os): Use "GuixSD" as label.
* gnu/system/vm.scm (system-disk-image): Use "GuixSD" or "GUIXSD" as volume
label.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/system/linux-initrd.scm (expression->initrd): Use 'program-file'
for 'init'.
(flat-linux-module-directory): Use 'computed-file' instead of
'gexp->derivation'.
(raw-initrd): Adjust accordingly.
* build-aux/hydra/gnu-system.scm (qemu-jobs): Add 'iso9660-image .
* gnu/build/vm.scm (make-iso9660-image): New variable. Export it.
* gnu/system/vm.scm (iso9660-image): New variable. Use make-iso9660-image.
(system-disk-image): Use iso9660-image.
* gnu/build/vm.scm (estimated-partition-size): New procedure.
* gnu/system/vm.scm (expression->derivation-in-linux-vm):
Change #:disk-image-size default to 'guess.
[builder]: When DISK-IMAGE-SIZE is 'guess, use
'estimated-partition-size' and compute and estimate of the image size.
(qemu-image): Likewise.
* guix/build/store-copy.scm (file-size, closure-size): New procedures.
* guix/scripts/system.scm (%default-options): Change 'image-size' to
'guess.
* doc/guix.texi (Building the Installation Image): Remove '--image-size'
flag from example.
(Invoking guix system): Document the image size estimate.
Fixes <https://bugs.gnu.org/27242>.
* gnu/system/mapped-devices.scm (open-luks-device): If
'find-partition-by-luks-uuid' fails, try again once per second, up to ten
times.
* doc/guix.texi (USB Stick Installation): Mention UEFI.
(Preparing for Installation): Add notes about EFI System Partition, and
mounting partitions before init.
(Proceeding with the Installation): Mention the GRUB-EFI package.
(Using the Configuration System): Lightweight desktop is now a UEFI system.
(GRUB Configuration): Expand on package field. Add indexes.
* gnu/system/examples/lightweight-desktop.tmpl: Adjust to native EFI configuration.
* gnu/system/examples/vm-image.tmpl: New file.
* Makefile.am (GUIXSD_VM_SYSTEMS, GUIXSD_VM_IMAGE_BASE,
GUIXSD_VM_IMAGE_SIZE): New variables.
(release): Add logic to build a VM image.
(EXAMPLES): Add 'gnu/system/examples/vm-image.tmpl'.
* doc/guix.texi (Running GuixSD in a VM, Installing GuixSD in a VM): Mention the
pre-built VM image.
* gnu/bootloader.scm: New file.
* gnu/bootloader/extlinux.scm: New file.
* gnu/bootloader/grub.scm: New file.
* gnu/local.mk: Build new files.
* gnu/system.scm: Adapt to new bootloader api.
* gnu/scripts/system.scm: Adapt to new bootloader api.
* gnu.scm: Remove (gnu system grub) and replace by (gnu bootloader) and (gnu
bootloader grub) modules.
* gnu/system/grub.scm: Moved content to gnu/bootloader/grub.scm.
* gnu/system/vm: Replace (gnu system grub) module by (gnu bootloader).
* gnu/tests.scm: Ditto.
* gnu/tests/nfs.scm: Ditto.
* gnu/system/grub.scm (<grub-configuration>): Add new fields
terminal-outputs, terminal-inputs, serial-unit, and serial-speed.
(grub-setup-io, setup-gfxterm): New procedures.
* doc/guix.texi (GRUB Configuration): Document the new fields.
* gnu/system/pam.scm (unix-pam-service): Add pam-entry for "pam_rootok.so" to
auth field when ALLOW-ROOT? is #T.
(base-pam-services): Allow root to run "su" without authentication.
* gnu/system/grub.scm (boot-parameters->menu-entry): New variable.
(grub-configuration-file): Use boot-parameters
instead of menu-entry where possible.
* guix/scripts/system.scm (profile-boot-parameters): Update docstring.
(reinstall-grub): Use profile-boot-parameters.
(perform-action): Use profile-boot-parameters.
This resulted in a couple of harmless warnings just before the menu is
displayed.
* gnu/system/grub.scm (eye-candy)[setup-gfxterm-body]: Move 'vbe' and
'vga' loading to the non-EFI branch.
Fixes a regression introduced in
7208995426 whereby (gnu system
file-systems) would pull in (gnu packages …) module, which in turn
breaks when importing things like (gnu build shepherd).
* gnu/system/file-systems.scm (file-system-type-predicate): Export.
(file-system-packages): Move to...
* gnu/system/linux-initrd.scm (file-system-packages): ... here. Add
docstring.
* gnu/services/base.scm: Use it.
* tests/file-systems.scm ("does not pull (gnu packages …)"): New test.
* gnu/system/linux-initrd.scm (base-initrd): Move helper-packages body to ...
* gnu/system/file-systems.scm (file-system-packages): ... here. New variable.
Also export it.
* gnu/system/linux-initrd.scm (raw-initrd): New exported variable.
(base-initrd): Use raw-initrd to build the initrd.
* doc/guix.texi (Initial RAM Disk): Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/system/vm.scm (virtualized-operating-system): Add full-boot?
option. Don't add a %store-mapping when full-boot? is passed. This leads
the grub-configuration-file procedure to look for the kernel and initrd in
/ instead of /gnu/store.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
(gnu system file-systems) is used on the "build" side since commit
5970e8e248.
* gnu/system/file-systems.scm: Remove dependency on (guix store).
(%store-prefix): New procedure.
* tests/file-systems.scm ("does not pull (guix config)"): New test.
Fixes <http://bugs.gnu.org/21108>.
Reported by Andy Patterson <ajpatter@uwaterloo.ca>
and Leo Famulari <leo@famulari.name>.
* gnu/build/activation.scm (activate-users+groups)[activate-user]: Pass
#:create-home? #t iff CREATE-HOME? and SYSTEM?.
(activate-user-home): New procedure.
* gnu/system/shadow.scm (account-shepherd-service): New procedure.
(account-service-type)[extensions]: Add SHEPHERD-ROOT-SERVICE-TYPE
extension.
* gnu/tests/base.scm (run-basic-test)["home"]
["skeletons in home directories"]: New tests.
* gnu/tests/install.scm (%separate-home-os, %separate-home-os-source)
(%test-separate-home-os): New variables.
Reported by myglc2 <myglc2@gmail.com>.
* gnu/system/mapped-devices.scm (<mapped-device>)[source]: Update
comment to note that this can be a list of strings.
Suggested by John Darrington <john@darrington.wattle.id.au>.
* gnu/system/file-systems.scm (%not-slash): New variable.
(file-prefix?): New procedure.
(file-system-needed-for-boot?): Use it to check whether FS holds the
store.
* tests/file-systems.scm ("file-system-needed-for-boot?"): New test.
* gnu/tests/install.scm (%separate-store-os)[file-systems]: Remove
'needed-for-boot?' field for "/gnu".
* gnu/system/linux-initrd.scm (base-initrd): When a FAT filesystem is
present: Add fatfsck/static in 'helper-packages'; and add nls_iso8859-1
in 'linux-modules'.
This is a followup to f7f292d359.
* doc/guix.texi (Preparing for Installation): Give commands for
encrypted root installation.
(Proceeding with the Installation): Add item about mapped devices.
(File Systems): Mention that 'dependencies' can list <mapped-device>
objects.
* gnu/system/examples/desktop.tmpl (mapped-devices): New field.
(file-systems): Add 'dependencies' field.
* gnu/build/linux-container.scm (mount-file-systems): 'mounts' is now a
list of <file-system> objects instead of a list of lists ("specs").
Add call to 'file-system->spec' as the argument to 'mount-file-system'.
(run-container, call-with-container): Adjust docstring accordingly.
* gnu/system/file-systems.scm (spec->file-system): New procedure.
* gnu/system/linux-container.scm (container-script)[script]: Call
'spec->file-system' inside gexp.
* guix/scripts/environment.scm (launch-environment/container): Remove
call to 'file-system->spec'.
* tests/containers.scm ("call-with-container, mnt namespace")
("call-with-container, mnt namespace, wrong bind mount"): Pass a list of
<file-system> objects.
* gnu/system.scm (<boot-parameters>)[store-device, store-mount-point]:
New fields.
(read-boot-parameters): Initialize them.
(operating-system-grub.cfg): Likewise. Remove STORE-FS argument from
call to 'grub-configuration-file'.
(operating-system-parameters-file): Add 'store' element in
'boot-parameters'.
* gnu/system/grub.scm (strip-mount-point): Replace 'store-fs' parameter
by 'mount-point'; adjust accordingly. Adjust callers.
(<menu-entry>)[device, device-mount-point]: New fields.
(eye-candy): Replace 'root-fs' parameter by 'store-device'; add
'store-mount-point'. Use keyword arguments for 'system' and 'port'.
(grub-root-search): Remove 'root-fs' by 'device' and adjust
accordingly.
(grub-configuration-file): Remove 'store-fs' parameter. Adjust
accordingly.
* guix/scripts/system.scm (previous-grub-entries): Initialize 'device'
and 'device-mount-point' fields from PARAMS.
* doc/guix.texi (GRUB Configuration): Document 'device' and
'device-mount-point'. Explain that 'linux' can be prefixed by a GRUB
device name.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
Based on a suggestion by Andy Wingo at
<https://lists.gnu.org/archive/html/guix-devel/2015-08/msg00753.html>.
* gnu/build/svg.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add it.
* gnu/system/grub.scm (svg->png): Add #:width and #:height. Rewrite to
use (gnu build svg).
(resize-image): Remove.
(grub-background-image): Adjust accordingly.
Christopher Baines
Ludovic Courtès
Andy Wingo
Danny Milosavljevic
Tobias Geerinckx-Rice
宋文武
Marius Bakke
Jan Nieuwenhuizen
Mark H Weaver
Leo Famulari
Mathieu Othacehe
Ricardo Wurmus
David Craven
John Darrington
Chris Marusich