* gnu/services/networking.scm (connman-shepherd-service): Make 'networking a
virtual service and set 'connman as its canonical name.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
According to the semantics in [1], 'networking should be a "virtual service"
and NetworkManager its canonical-name. This does not influence
existing services and they should continue to use the 'networking symbol.
One visible change is that 'herd status' doesn't show 'networking' anymore,
instead listing 'NetworkManager' in its place but both symbols are can be used
to start and stop the same service.
Note: Though the symbol NetworkManager doesn't really conform with the overall kebab-case
used throughout Guix, this is intentional as we really want to make it clear that
that the symbol NetworkManager really refers to the software called NetworkManager,
since it's a canonical name here. (rather than risk misleading the user to interpret
the symbol network-manager as a symbol for some unspecific network management software)
[1]: https://www.gnu.org/software/shepherd/manual/html_node/Jump-Start.html
* gnu/services/networking.scm (network-manager-shepherd-service): Make 'networking a
virtual service and set 'NetworkManager as its canonical name.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This is similar to its NetworkManager-wait-online.service systemd counterpart,
with the main difference being that we handle it all in 'networking symbol, rather than
introduce a new 'networking-online symbol. (see discussion #47253)
As a result of this change, with opensmtpd-service-type as an example,
manual 'herd restart smtpd' after system bootups are no longer required
when opensmtpd is configured with a smtpd.conf containing non-loopback interfaces.
(this issue is described in more detail at #60300)
Fixes <https://issues.guix.gnu.org/60300>.
* gnu/services/networking.scm (network-manager-shepherd-service): Await for
NetworkManager to finish starting up.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/networking.scm (<connman-configuration>)
[iwd?]: Use helper to warn deprecated field.
(connman-shepherd-service): Make iwd? a local variable independent from
the deprecated field.
* doc/guix.texi (Networking Setup): Remove mention of iwd? field.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/networking.scm (warn-iwd?-field-deprecation): New procedure,
helper for deprecated field.
(<network-manager-configuration>)[iwd?]: Use helper to warn deprecated field.
(network-manager-shepherd-service): Make iwd? a local variable independent
from the deprecated field.
* doc/guix.texi (Networking Setup): Remove mention of iwd? field.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Note: This also makes wpa-supplicant an optional requirement.
* gnu/services/networking.scm (<network-manager-configuration>)
[shepherd-requirement]: New field.
(network-manager-shepherd-service): Honor it.
(network-manager-configuration-shepherd-requirement): Export accessor.
* doc/guix.texi (Networking Setup): Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
The Knot DNS service in Guix uses two days, or 48 hours, for the SOA
refresh interval but that is outside the range of RFC 1912, which is
entitled "Common DNS Operational and Configuration Errors." [1]
Section 2.2 of RFC 1912 recommends a maximum of 12 hours for the SOA
refresh rate: "You can keep it short (20 mins to 2 hours) if you
aren't worried about a small increase in bandwidth used, or longer
(2-12 hours) if your Internet connection is slow or is started on
demand."
This commit sets the default refresh interval at the nearest value
recommended by the standard, which is 12 hours.
Due to the widespread adoption of NOTIFY messages between primary and
secondary DNS servers, the SOA refresh interval has arguably lost some
importance, but the Guix default should still be in line with the
standards.
Values outside the recommended range can provoke warning messages from
services commonly used to find bugs in DNS configurations, such as the
MX Toolbox Super Tool. [2]
[1] https://datatracker.ietf.org/doc/rfc1912/
[2] https://mxtoolbox.com/SuperTool.aspx
* gnu/services/dns.scm (<zone-file>)[refresh]: Default to (* 12 3600).
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
* gnu/services/desktop.scm (<sugar-desktop-configuration>): Add new fields for
activities and gobject-introspection.
(sugar-gobject-introspection, sugar-activities): New procedures.
(sugar-desktop-service-type): Install packages for activities and
gobject-introspection alongside the sugar package.
* doc/guix.texi (Desktop Services): Document changes.
Fixes <https://issues.guix.gnu.org/61201>.
Previously, common practice was to splice arbitrary strings (user names,
file names, etc.) into Texinfo snippets passed to 'display-hint'. This
is unsafe in the general case because at signs and braces need to be
escaped to produced valid Texinfo. This commit addresses that.
* guix/ui.scm (texinfo-quote): New procedure.
(display-hint): When ARGUMENTS is non-empty, pass it to 'texinfo-quote'
and call 'format'.
(report-unbound-variable-error, check-module-matches-file)
(display-collision-resolution-hint, run-guix-command): Remove explicit
'format' call; pass 'format' arguments as extra arguments to 'display-hint'.
* gnu/services/monitoring.scm (zabbix-front-end-config): Likewise.
* guix/scripts.scm (warn-about-disk-space): Likewise.
* guix/scripts/build.scm (%standard-cross-build-options)
(%standard-native-build-options): Likewise.
* guix/scripts/describe.scm (display-checkout-info): Likewise.
* guix/scripts/environment.scm (suggest-command-name): Likewise.
* guix/scripts/home.scm (process-command): Likewise.
* guix/scripts/home/edit.scm (service-type-not-found): Likewise.
* guix/scripts/import.scm (guix-import): Likewise.
* guix/scripts/package.scm (display-search-path-hint): Likewise.
* guix/scripts/pull.scm (build-and-install): Likewise.
* guix/scripts/shell.scm (auto-detect-manifest): Likewise.
* guix/scripts/system.scm (check-file-system-availability): Likewise.
(guix-system): Likewise.
* guix/scripts/system/edit.scm (service-type-not-found): Likewise.
* guix/status.scm (print-build-event): Likewise.
This follows up on commit ae0975332c60818793c6c63a3646c982d686bf49?.
* gnu/services/desktop.scm (geoclue-service-type): Set default-value.
Signed-off-by: Tobias Geerinckx-Rice <me@tobias.gr>
* doc/guix.texi (Miscellaneous Services): Replace 'lirc-service' with 'lirc-service-type'.
Document <lirc-configuration>.
* gnu/services/lirc.scm (<lirc-configuration>): Set default values based on
the arguments from the now deprecated 'lirc-service' procedure.
(lirc-service-type): Set default value.
(lirc-service): Deprecate procedure.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Desktop Services): Replace 'geoclue-service' with 'geoclue-service-type'.
* gnu/services/desktop.scm (<geoclue-configuration>): Set default values
based on the values from the now deprecated geoclue-service procedure.
(geoclue-service): Deprecate procedure.
(desktop-services-for-system): Use geoclue-service-type.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/desktop.scm (<elogind-configuration>)[handle-hibernate-key]: Set default value to 'hibernate.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Networking Services): Remove mention of lsh-service.
Document lsh-service-type and lsh-service-configuration.
* gnu/services/ssh.scm (<lsh-configuration>): Set default values based
on the now deprecated 'lsh-service' procedure.
(lsh-service-type): Set default value.
(lsh-service): Deprecate procedure.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* doc/guix.texi (Base Services): Replace rngd-service with rngd-service-type.
Document <rngd-configuration>.
* gnu/services/base.scm (<rngd-configuration>): Set default values from
the values in the now deprecated 'rngd-service' procedure.
(rngd-service): Deprecate procedure.
(rngd-service-type): Set default value.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/desktop.scm (gnome-setuid-programs): New variable.
(gnome-desktop-service-type): Extend setuid-program-service-type with it.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/desktop.scm (<gnome-desktop-configuration>): Rename gnome
package accessor to gnome-desktop-configuration-gnome, to avoid name conflict.
(gnome-packages): Change first argument from a config object to a the gnome
package used. Rename second argument from package to name. Extract core
logic into...
(gnome-package): ... this.
(gnome-udev-rules, gnome-polkit-settings): Adjust accordingly.
(gnome-desktop-service-type): Likewise.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/desktop.scm (gnome-polkit-settings): Add spice-gtk to the GNOME
packages providing polkit rules.
(package-direct-input-selector): Allow passing a list corresponding to the
dependency tree, so that non-propagated transitive inputs can be specified.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Fixes a regression introduce in 01334a61c7
that would prevent system cross-compilation (with "guix system image
--target=...") due to 'font-gnu-unifont' depending on 'perl-gd', which
currently cannot be cross-compiled.
* gnu/services/base.scm (%default-console-font, kmscon-service-type):
Refer to 'font-gnu-unifont' with 'ungexp-native'.
It has even better language support than LatGrkCyr-8x16 and can show
fancy progress bars.
* gnu/services/base.scm (%default-console-font): Use unifont.
* gnu/services/configuration.scm
(generate-documentation): Format a list of packages by their names.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Deprecates %facebook-host-aliases in favour of using
hosts-service-type service extensions.
* gnu/services/networking.scm
(block-facebook-hosts-service-type): New variable.
(%facebook-host-aliases): Deprecate variable.
* doc/guix.texi: Document it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/base.scm (<host>): New record type.
(host): New procedure.
(hosts-service-type): New variable.
* doc/guix.texi (Service Reference): Document it.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/packages/jami.scm (libjami) [outputs]: Add a "bin" output.
[arguments]: Add a move-jamid phase.
* gnu/services/telephony.scm
(jami-configuration->command-line-arguments): Refer to the "bin" output of
libjami.
(jami-shepherd-services): Likewise.
This is a followup to commit 5c5f0fc113
* gnu/services/audio.scm (mpd-serialize-list-of-string): Fix serialization procedure.
Signed-off-by: Leo Famulari <leo@famulari.name>
* gnu/services/audio.scm (mympd-service-type): New variable.
* gnu/tests/audio.scm (%test-mympd): New variable.
* doc/guix.texi: Document it.
Signed-off-by: Liliana Marie Prikler <liliana.prikler@gmail.com>
Services should not expect for XDG_RUNTIME_DIR to be set.
Inferring from the past comment, this seemed to resolve an issue when
the service was launched with an _interactive_ user-account,
which tends to have this variable set by the login-manager.
This is not the case for system accounts and setting this variable
results in PulseAudio (launched by the same system user) failing to start
since it attempts to use a nonexistent directory.
Ideally, this service should have a home-service counterpart but the old
behavior can be emulated by setting the environment-variables field to:
(environment-variables
(list
(string-append "XDG_RUNTIME_DIR=/run/user/"
(number->string (passwd:uid (getpwnam "myuser"))))))
* gnu/services/audio.scm
(mpd-configuration)[environment-variables]: New field.
(mpd-shepherd-service)[start]: Use new field.
* doc/guix.texi (Audio Services)[Music Player Daemon]: Document it.
Signed-off-by: Liliana Marie Prikler <liliana.prikler@gmail.com>
* gnu/services/web.scm (<hpcguix-web-configuration>)[specs]: Default to #f.
(hpcguix-web-shepherd-service): Do not pass '--config' when SPECS is #f.
(hpcguix-web-service-type)[default-value]: New field.
* doc/guix.texi (Web Services): Adjust accordingly.
* gnu/services/base.scm (<greetd-terminal-configuration>)[source-profile?]:
New field.
(make-greetd-terminal-configuration-file): Serialize new field to
configuration file.
* doc/guix.texi (Base Services): Document it.
* gnu/services/games.scm (joycond-configuration): New configuration type.
(joycond-shepherd-service): New procedure.
(joycond-service-type): New variable.
* doc/guix.texi (Game Services): Document it.
This fixes a regression from 543d971ed2 whereby
match-lambda due to configuration field reordering.
* gnu/services/security.scm:
[serialize-fail2ban-ignore-cache-configuration]: Switch to match-record.
[serialize-fail2ban-jail-filter-configuration]: Switch to match-record.
[serialize-fail2ban-jail-action-configuration]: Switch to match-record.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/desktop.scm (enlightenment-desktop-service-type): Extend
the enlightenment-desktop-service-type with the udev rules from the
ddcutil input in the udev-service-type.
Fixes <https://issues.guix.gnu.org/60383>.
* gnu/services/sound.scm (pulseaudio-etc): Produce daemon.conf
unconditionally, with the correct default-script-file location. Produce
client.conf unconditionally.
Reported-by: Bruno Victal <mirai@makinata.eu>
* gnu/services/desktop.scm (bluetooth-service): Sync docstring with info,
remove mention to group not really needed to access D-Bus service.
* doc/guix.texi (Desktop Services): Also remove mention to group here.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/ganeti.scm (ganeti-watcher-jobs): Label job as "ganeti-watcher".
(ganeti-cleaner-jobs): Labels jobs as "ganeti master cleaner" and "ganeti node
cleaner".
This provides glyphs for additional fonts such as Amharic that were
otherwise missing.
Fixes <https://issues.guix.gnu.org/60164>.
Reported by Wolf <wolf@wolfsden.cz>.
* gnu/services/base.scm (kmscon-service-type): In 'start' method,
pass #:environment-variables to set 'XDG_DATA_DIRS'.
* gnu/services/ldap.scm (slapd-configuration): Update default value for
run-dir to match defaults of 389-ds-base package.
* doc/guix.texi: Update documentation.
'generic-serialize-alist' refers to (gnu home services version-control)
for usage examples but there's no such module.
* gnu/services/configuration.scm (generic-serialize-alist): Adjust
docstring.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/nix.scm (<nix-configuration>)[build-directory]: New field.
(nix-service-etc, nix-shepherd-service): Take them into account.
* doc/guix.texi (Nix): Update it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Previously the service would keep starting more and more processes.
* gnu/services/guix.scm (guix-build-coordinator-shepherd-services): Fix how
make-forkexec-constructor is called.
This reduces the closure size of systems by removing one glibc
copy--namely (@ (gnu packages base) glibc) in addition to (@ (gnu
packages commencement) glibc-final).
* gnu/services/base.scm (<nscd-configuration>)[glibc]: Change default
value to use 'let-system' and 'canonical-package' as appropriate.
This allows 'match-record' to be more efficient (field offsets are
computed at compilation time) and to report unknown fields at
macro-expansion time.
* guix/records.scm (map-fields): New macro.
(define-record-type*)[rtd-identifier]: New procedure.
Define TYPE as a macro and use a separate identifier for the RTD.
(lookup-field, match-record-inner): New macros.
(match-record): Rewrite in terms of 'match-error-inner'.
* tests/records.scm ("match-record, simple")
("match-record, unknown field"): New tests.
* gnu/services/cuirass.scm (cuirass-shepherd-service): Rename 'log-file'
local variable to 'main-log-file'.
* gnu/services/getmail.scm (serialize-getmail-configuration-file): Move
after <getmail-configuration-file> definition.
Previously, we were passing '-b', thereby starting the server in the
background. Consequently the 'start' method could complete before the
server was ready to accept connections on its socket, leading to
non-deterministic test failures.
Reported by Mathieu Othacehe <othacehe@gnu.org>.
* gnu/services/security.scm (fail2ban-shepherd-service): Change
FAIL2BAN-ACTION to invoke 'fail2ban-client'.
Change 'start' method to use 'make-forkexec-constructor'; start the
server in the foreground with '-f' and pass '-x' to force execution of
the server, as done upstream in 'fail2ban.service.in'.
* gnu/services/security.scm (fail2ban-shepherd-service): Change
FAIL2BAN-ACTION to return an 'invoke' gexp.
Adjust the shepherd 'start' and 'stop' fields accordingly. Have 'stop'
return #f on success.
Fixes <https://issues.guix.gnu.org/59423>.
* gnu/services/configuration.scm (define-configuration-helper): Rename the
accessor of the %location field from "NAME-location" to
"NAME-source-location".
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Reported-by: Pierre Langlois <pierre.langlois@gmx.com>
* gnu/services/vpn.scm (wireguard-activation): Use the "wg" binary from
the package given to <wireguard-configuration>.
Signed-off-by: 宋文武 <iyzsong@member.fsf.org>
The service already runs with the specified user and group, so there is no use
in writing it to the configuration files. This change is mainly done for
compatibility with 'zabbix-agent2' which does not understand the User=
setting, but also to document the correct data type for the "group" setting.
* gnu/services/monitoring.scm (serialize-string): Filter USER and GROUP
fields.
(group?, serialize-group): Remove variables.
(zabbix-server-configuration, zabbix-agent-configuration): Document the GROUP
field as 'string'.
* doc/guix.texi (Monitoring Services): Adjust accordingly.
Fixes <https://issues.guix.gnu.org/59423>.
* gnu/services/configuration.scm (define-configuration-helper): Rename the
accessor of the %location field from "NAME-location" to
"NAME-source-location".
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Reported-by: Pierre Langlois <pierre.langlois@gmx.com>
This allows 'match-record' to be more efficient (field offsets are
computed at compilation time) and to report unknown fields at
macro-expansion time.
* guix/records.scm (map-fields): New macro.
(define-record-type*)[rtd-identifier]: New procedure.
Define TYPE as a macro and use a separate identifier for the RTD.
(lookup-field, match-record-inner): New macros.
(match-record): Rewrite in terms of 'match-error-inner'.
* tests/records.scm ("match-record, simple")
("match-record, unknown field"): New tests.
* gnu/services/cuirass.scm (cuirass-shepherd-service): Rename 'log-file'
local variable to 'main-log-file'.
* gnu/services/getmail.scm (serialize-getmail-configuration-file): Move
after <getmail-configuration-file> definition.
* gnu/services/networking.scm (network-manager-configuration)[iwd?]: New
field.
(network-manager-shepherd-service): Add iwd to requirements if needed.
* doc/guix.texi: Add information about iwd? option.
* gnu/services/databases.scm (mysql-install): Run "mariadb-install-db" instead
of a hard coded set of SQL commands.
(mysql-upgrade-wrapper): Explicitly run as mysql user.
* gnu/services/databases.scm (mysql-with-install-lock): Remove variable.
(mysql-start): Rename to ...
(mysqld-wrapper): ... this. Do the preliminary initialization steps and call
out to MYSQL-INSTALL when necessary.
(mysql-install): Only initialize table schemas.
(mysql-install-shepherd-service): Remove.
(mysql-service)[requirement]: Remove 'mysql-install. Add 'user-processes.
[start]: Don't pass #:user and #:group.
(mysql-shepherd-services): Remove MYSQL-INSTALL-SHEPHERD-SERVICE.
* gnu/services/databases.scm (mysql-upgrade-wrapper): Take service
configuration as argument, and pass the config file to mysql_upgrade.
(mysql-upgrade-shepherd-service): Pass CONFIG instead of just socket and
executable to MYSQL-UPGRADE-WRAPPER.
* gnu/services/databases.scm (mysql-configuration): Add datadir property.
* gnu/services/databases.scm (mysql-configuration-file): Replace hard coded
data dir with property from config.
* gnu/services/databases.scm (%mysql-activation): Remove activation, it runs
before PID 1. The data dir may reside on a file system not mounted at this
time.
* gnu/services/databases.scm (mysql-install-shepherd-service): Create service
which replaces the activation. Provide mysql-install.
* gnu/services/databases.scm (mysql-shepherd-service): Move invocation of
mysqld to mysql-start program-file, because the invocation gotten more
complex. Require mysql-install.
* gnu/services/databases.scm (mysql-start): Invoke mysqld only if a lock file
appears.
* gnu/services/databases.scm (mysql-shepherd-services): Prepend the install
service before the normal service.
* gnu/services/databases.scm (mysql-upgrade-wrapper): Increase timeout to
20s to let the mysql install procedure finish.
Signed-off-by: Marius Bakke <marius@gnu.org>
This is a follow-up to commit 9ad311ec15.
* gnu/packages/virtualization.scm: Remove copyright line.
* gnu/services/virtualization.scm: Add copyright line.
Signed-off-by: Christopher Baines <mail@cbaines.net>
* gnu/services/guix.scm (guix-build-coordinator-shepherd-services,
guix-build-coordinator-agent-shepherd-services,
guix-build-coordinator-queue-builds-shepherd-services): Set
%current-logfile-date-format to "".
Signed-off-by: Christopher Baines <mail@cbaines.net>
There's an unwritten policy to not use GOOPS in Guix.
* gnu/services/lightdm.scm (strip-class-name-brackets): Rename to...
(strip-record-type-name-brackets): ... this.
(config->name): Adjust accordingly and use 'record-type-name' instead of
'class-name'.
(list-of-greeter-configurations?): Likewise.
Fixes a regression introduced in
44554e7133 whereby the wrong record fields
would be accessed, leading to a <location> record being spliced in the
result.
* gnu/services/getmail.scm (serialize-getmail-configuration-file): Use
'match-record' instead of 'match'.
(getmail-shepherd-services): Likewise.
The default value for <gitolite-configuration> has "git" for both the values
of the user and the group, as costumary, which means that unless someone uses
a custom configuration and chooses different strings for user and group, this
wouldn't show up.
* gnu/services/version-control.scm (gitolite-accounts): Use the correct
variable for the name of a (user-group ...).
Signed-off-by: Christopher Baines <mail@cbaines.net>
These were spot while working on a fix for commit 543d971ed2 ("services:
configuration: Re-order generated record fields").
* gnu/services/web.scm (php-fpm-accounts): Remove extraneous trailing dummy
catchall patterns.
(agate-accounts): Access the configuration fields directly since there are
only two, which is less error-prone.
Commit 543d971ed2 ("services: configuration: Re-order generated record
fields") introduced two regressions, one in guix home and another one in the
zabbix service.
* gnu/home/services/shells.scm (home-bash-extensions): Remove the first
pattern in the match, which used to be to ignore %location.
* gnu/services/monitoring.scm (zabbix-front-end-nginx-extension): Likewise.
This reverts commit 39e4e00f75, with fixes for
the guix home issues reported and another one found while reconfiguring berlin
in the subsequent commit.
This reverts commit 543d971ed2, and
its dependent commit 9b21cd2e9a, which
appear to have triggered a recent wave of ‘guix home’ regressions
involving (services (list (service home-bash-service-type))):
In gnu/home/services/shells.scm:
504:7 3 (home-bash-extensions #<<home-bash-configuration> package: #<package bash@5.1.8 gnu/packages/ba…> …)
In unknown file:
2 (append #<<location> file: "…" line: 14 column: 12> ())
In ice-9/boot-9.scm:
1685:16 1 (raise-exception _ #:continuable? _)
1685:16 0 (raise-exception _ #:continuable? _)
ice-9/boot-9.scm:1685:16: In procedure raise-exception:
In procedure append: Wrong type argument in position 1 (expecting empty list): #<<location> file: "…" line: 14 column: 12>
I should love to dive in & fix this rather than revert, but urgently
need sleep.
* gnu/services/mcron.scm (list-of-gexps?): New predicate.
(mcron-configuration): Rewrite using define-configuration.
[log?, log-format]: New fields.
(mcron-shepherd-services): Invoke mcron with the --log and --log-format
arguments when log? is #t,
(generate-doc): New procedure.
* doc/guix.texi (Scheduled Job Execution): Update doc.
(Mcron Home Service): Likewise.
* gnu/home/services/mcron.scm: Keep in sync with the above changes to
gnu/services/mcron.scm.
This is so that the first field of the generated record matches the first one
declared, which makes 'define-configuration' record API compatible with
define-record-type* ones.
* gnu/services/configuration.scm (define-configuration-helper): Move the
%location field below the ones declared by the user.
* gnu/services/monitoring.scm (zabbix-front-end-config): Adjust match pattern
accordingly.
This is a follow-up of: fb35b7cedd.
* gnu/services/vpn.scm (wireguard-service-type): Add the wireguard package
from the configuration to the profile.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/services/vpn.scm (wireguard-service-type): Include the
"wireguard-tools" package as an extension to profile-service-type, so
that users that enable the wireguard service can interact with it via
the command-line without having to manually install wireguard-tools.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* gnu/services/ganeti.scm (<ganeti-os>)[extension]: Default to #f.
(ganeti-os->directory): Only add extension if set. Support a file-like object
for VARIANTS.
* doc/guix.texi (Virtualization Services): Document this change and add
example. Update Ganeti URLs while at it.
* gnu/services/vpn.scm (<wireguard-configuration>)[pre-up, post-up, pre-down,
post-down, table]: New fields.
(wireguard-configuration-file): Take them into account.
* doc/guix.texi (Wireguard): Update it.
* gnu/services/web.scm (nginx-shepherd-service): Be explicit about the
reload action not changing the configuration file, but instead
respawning worker processes.
Signed-off-by: Christopher Baines <mail@cbaines.net>
* gnu/services/web.scm (nginx-shepherd-service): Use the simpler
"nginx-action" helper, for the same reload side-effect.
Signed-off-by: Christopher Baines <mail@cbaines.net>
These typos were found and reported through weblate.
* gnu/packages/audio.scm (wildmidi)[description]: Fix typo.
* gnu/packages/games.scm (cgoban)[description]: Fix typo.
* gnu/services/version-control.scm (gitolite-service-type)[description]:
Fix typo.
* gnu/installer/newt/substitutes.scm (run-substitutes-page): Remove full
stop at end of title.
* gnu/machine/ssh.scm (machine-ssh-configuration-system): Move
punctuation outside of quotes.
* guix/scripts/home.scm (process-action): Remove trailing space before
newline.
* guix/scripts/system.scm (show-help): Fix typo.
* guix/scripts/environment.scm (with-store/maybe): Fix typo.
In a new "reload" shepherd-action, send a SIGHUP to the NGINX master process,
so that it can re-read the configuration file and start new worker processes.
* gnu/services/web.scm (nginx-shepherd-service): Add the "reload"
shepherd-action.
Signed-off-by: Christopher Baines <mail@cbaines.net>
This is not done for gdm-service-type, so do not do it here either, for
consistency. Perhaps that change had been motivated by the fact that using
ratpoison without a default terminal makes for a poor user experience (one
cannot even view the help screen without a terminal); this was fixed with the
preceding commit.
* gnu/services/xorg.scm (slim-service-type)
[profile-service-type]: Remove extension.
* gnu/services/guix.scm (guix-build-coordinator-agent-configuration-max-allocated-builds):
New procedure.
(guix-build-coordinator-agent-shepherd-services): Use max-allocated-builds.
* doc/guix.texi (Guix Build Coordinator): Document this new field.
This allows the dconf profile directive "system-db:" to look up profiles by
name from under /etc/dconf/db/.
* gnu/services/xorg.scm (dconf-keyfile, dconf-profile): New procedures.
(dconf-profiles?): New predicate.
(dconf-configuration): New procedure.
(dconf-profile->profile-file): Likewise.
(dconf-profile->db-keyfile): Likewise.
(dconf-profile->db-keyfile-dir): Likewise.
(dconf-profile->db): Likewise.
(dconf-profile->files): Likewise.
(dconf-service-type): New service type.
* gnu/services/xorg.scm (<gdm-configuration>)[xdmcp?]: New field.
* gnu/services/xorg.scm (gdm-configuration-file): Use it. Use (ice-9 format)
to serialize boolean.
(gdm-polkit-rules): New variable.
(gdm-service-type): Use it to extend polkit.
* doc/guix.texi (X Window): Document it.
* gnu/services/networking.scm (dhcp-client-configuration): New record
configuration.
(dhcp-client-shepherd-service): Implement a shepher service. Provide a
deprication message for legacy configurations.
(dhcp-client-service-type): Use dhcp-client-shepherd-service.
* doc/guix.texi (Networking Setup): Update.
* po/guix/POTFILES.in: Add 'gnu/services/networking.scm'.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/web.scm (anonip-shepherd-service)[start]: Accept zero
arguments. Define 'spawn'. Print a message and return #f when #$INPUT
does not denote a FIFO.
When trying to run certbot, the mcron command fails, as
/etc/letsencrypt/live is missing. This patch adds it into the certbot
activation service.
* gnu/services/certbot.scm (certbot-activation): Make /etc/letsencrypt/live.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This gets rid of that (in)famous at boot time:
error in finalization thread: Success
This was caused by the file-descriptor closing loop, which would clause
the finalization pipe, leading the finalization thread to (erroneously)
error out.
Thanks to Josselin Poiret for locating the problem!
* gnu/services/shepherd.scm (shepherd-boot-gexp): In 'loop', replace
'close-fdes' with a pair of 'fcntl' calls to add FD_CLOEXEC.
An empty root or index field is an error in nginx.
* gnu/services/web.scm (emit-nginx-server-config): Don't emit root or
index fields when they are empty
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes <https://issues.guix.gnu.org/44944>.
* gnu/services/xorg.scm (%gdm-activation): Delete variable.
(gdm-service-type): De-register it.
* gnu/services/desktop.scm (%gdm-file-system): New variable.
(gdm-file-system-service): Likewise.
(desktop-services-for-system): Use it.
This a followup to 59ee837d8b, which changed the
default value of the HandleLidSwitchExternalPower to the empty string.
Unfortunately this causes elogind to print a warning (although it otherwise
works as intended). This change fixes that.
* gnu/services/desktop.scm (elogind-configuration-file)<handle-action>: Let
the unspecified value go through.
<ini-file-clause>: When an unspecified file is encountered, do not produce any
text to serialize.
Conflicts resolved in:
gnu/local.mk
gnu/packages/cmake.scm
gnu/packages/glib.scm
gnu/packages/gnome.scm
gnu/packages/gtk.scm
gnu/packages/sdl.scm
pango-next, vala-next and librsvg-bootstrap were removed in the process.
Fixes a bug introduced with the Shepherd 0.9.2 upgrade in commit
1ba0e38267 whereby files opened by, say,
the 'start' method of 'urandom-seed', could leak into the execution
environment of some other service--e.g., 'term-tty4'.
* gnu/services/shepherd.scm (shepherd-configuration-file)[config]:
Override 'call-with-input-file' and 'call-with-output-file'.
Reported by zamfofex.
Regression introduced in 2bac6ea177.
* gnu/services/virtualization.scm (secret-service-operating-system):
Add 'inherit' keyword for 'guix-configuration'.
Failing to do that, that file descriptor could be inherited by child
processes as of Shepherd 0.9.2.
* gnu/services/shepherd.scm (shepherd-configuration-file): Open
/dev/null as O_CLOEXEC.
* gnu/services/web.scm (<nginx-configuration>)[shepherd-requirement]:
New field.
(nginx-shepherd-service): Honor it.
* doc/guix.texi (Web Services): Document it.
This is the documented default of UPower 0.99.15 (the actual default
appears to be #f though).
* gnu/services/desktop.scm (<upower-configuration>)
[use-percentage-for-policy?]: Default to #t.
* doc/guix.texi (Desktop Services): Adjust accordingly. Explain the
tradeoff.
These values are those used by default by UPower 0.99.15.
* gnu/services/desktop.scm (<upower-configuration>)[percentage-low]
[percentage-critical]: Increase.
* doc/guix.texi (Desktop Services): Update accordingly.
* gnu/services/security.scm: Wrong condition in string-filter
function in fail2ban-jail-configuration-serialize-field-name.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Fixes https://issues.guix.gnu.org/56444
* gnu/services/version-control.scm (gitolite-activation): Modify permissions
on home directory so that git group has read access.
Reported-by: Evgeny Pisemsky <evgeny@pisemsky.com>
Experienced by David Thompson for years, wondering what was wrong. Thanks for
finding the root cause, Evgeny! :)
* gnu/services/lightdm.scm: New service.
* tests/services/lightdm.scm: Test it.
* doc/guix.texi (X Window): Document it.
* gnu/local.mk (GNU_SYSTEM_MODULES): Register it.
Co-authored-by: L p R n d n <guix@lprndn.info>
Co-authored-by: Ricardo Wurmus <rekado@elephly.net>
* gnu/services/base.scm (<greetd-configuration>)
[greeter-supplementary-groups]: New field.
(%greetd-accounts): Rename to...
(greetd-accounts): ... this. Convert to a function that takes a config
argument. Use greeter-supplementary-groups.
(greetd-service-type): Adjust accordingly.
* gnu/tests/desktop.scm (%minimal-services): Add test for
greeter-supplementary-groups.
* doc/guix.texi ("Base Services")[greetd-service-type]: Document
greeter-supplementary-groups.
* gnu/services/desktop.scm (seatd-group-sanitizer): New variable.
(<seatd-configuration>)[user]: Removed field.
[group]: Changed to "seat". Sanitize via seatd-group-sanitizer.
(seatd-accounts): New variable.
(seatd-environment): Adjust to <seatd-configuration> ABI.
(seatd-service-type)[extensions]: Add account-service-type with seatd-accounts.
* gnu/tests/desktop.scm (run-minimal-desktop-test): Check for correct
ownership of $SEATD_SOCK.
* doc/guix.texi ("Desktop Services")[seatd-service-type]: Mention that users
may need to become members of the "seat" group.
Update default value for group field.
Add explanation on seatd.sock file.
Remove dropped user field.
The new value of %unset-value sticks out more when something goes wrong, and
is also more unique; i.e. easier to search for.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/home/services/ssh.scm (serialize-address-family): Use the public API of
the maybe infrastructure.
* gnu/services/file-sharing.scm (serialize-maybe-string): Use maybe-value.
(serialize-maybe-file-object): Use maybe-value-set?.
* gnu/services/getmail.scm (getmail-retriever-configuration): Don't use
internals in unset field declarations.
(getmail-destination-configuration): Ditto.
* gnu/services/messaging.scm (raw-content?): Use maybe-value-set?.
(prosody-configuration): Use %unset-value.
* gnu/services/telephony.scm (jami-shepherd-services): Use maybe-value-set?.
(archive-name->username): Use maybe-value-set?.
* tests/services/configuration.scm ("maybe type, no default"): Use
%unset-value.
Modified-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/configuration.scm (%unset-value): New variable.
(normalize-field-type+def): Use it.
(maybe-value-unset?): Use it.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/services/configuration.scm (maybe-value-set?): New procedure.
* doc/guix.texi (Complex Configurations): Document it. Remove comment showing
usage of 'maybe-string' with a default value, which doesn't make sense.
Co-authored-by: Attila Lendvai <attila@lendvai.name>
Fixes <https://issues.guix.gnu.org/57052>, which was a behavior change
introduced inadvertently in 4c698cd512.
* gnu/services/desktop.scm (<elogind-configuration>)
[handle-lid-switch-external-power]: Default to *unspecified*, which serializes
to nothing. This matches upstream behavior, meaning that even when plugged to
a power cord, a laptop will suspend when the lid is closed.
* doc/guix.texi (Desktop Services): Update doc.
Reported-by: Cairn <cairn@pm.me>
Andrew Tropin
Sergey Trofimov
Bruno Victal
Felix Lechner
Christopher Baines
Ricardo Wurmus
Ludovic Courtès
Maxim Cournoyer
Julien Lepiller
Jelle Licht
Efraim Flashner
Declan Tsien
Zhu Zihao
David Thompson
muradm
Giacomo Leidi
Mathieu Othacehe
jgart
Ivan Vilata i Balaguer
Timo Wilken
Marius Bakke
Florian Pelz
Petr Hodina
EuAndreh
Ellen Papsch
Leo Nikkilä
Tobias Geerinckx-Rice
( via Guix-patches via
Alexey Abramov
Vagrant Cascadian
(
Mája Tomášek
Brice Waegeneire
Simen Endsjø
Simon Streit
Oleg Pykhalov
Hilton Chain
Attila Lendvai