Fixes <http://bugs.gnu.org/23056>.
Reported by Michael Downey <shaggy814@yandex.com>
and Kei <kei@openmailbox.org>.
* gnu/system/install.scm (installation-os)[file-systems]: Add "/tmp".
This fixes a bug whereby fonts in /run/current-system/profile would be
invisible to Fontconfig.
* gnu/packages/fontutils.scm (fontconfig): Add comment about system
profile not being searched.
* gnu/system/shadow.scm (default-skeletons)[fonts.conf-content,
fonts.conf]: New variable.
Add FONTS.CONF to the skeletons.
Fixes <http://bugs.gnu.org/22633>.
* gnu/build/vm.scm (load-in-linux-vm): Only pass "-enable-kvm" flag to qemu
if "/dev/kvm" is present.
* gnu/system/vm.scm (common-kvm-options): Same as above.
Fixes <http://bugs.gnu.org/22572>.
Reported by Mark H Weaver <mhw@netris.org>.
* gnu/system/locale.scm (%not-dot): New variable.
(denormalize-codeset, locale-name->definition): New procedures.
* gnu/system.scm (locale-name->definition*): New procedure.
(operating-system-locale-directory): Instead of raising an error, add
the missing locale.
* doc/guix.texi (Locales): Adjust accordingly.
* gnu/system/linux-container.scm (containerized-operating-system)[user-file-systems]:
Check whether SOURCE is a string before calling 'string-prefix?'.
* guix/build/bournish.scm: New file.
* Makefile.am (MODULES): Add it.
* gnu/system/linux-initrd.scm (base-initrd): Add (guix build bournish)
and use it.
* gnu/system/pam.scm (<pam-configuration>): New record type.
(/etc-entry): Change 'services' parameter' to 'config'. Honor the
'transform' field of CONFIG.
(extend-configuration): New procedure.
(pam-root-service-type): Use EXTEND-CONFIGURATION as the 'extend'
field.
(pam-root-service): Add #:transform parameter. Service value is a
<pam-configuration>.
Adds modules needed for encrypted root partitions using the Serpent cipher or
Whirlpool digest algorithms.
* gnu/system/linux-initrd.scm (base-initrd)[linux-modules]: Add
"serpent_generic" and "wp512".
Fixes keyboard of MacBook2,1 during early boot, e.g. for typing a password to
mount an encrypted root partition.
* gnu/system/linux-initrd.scm (base-initrd)[linux-modules]: Add "hid-generic"
and "hid-apple".
Fixes <http://bugs.gnu.org/22281>.
Reported by Christopher Allan Webber <cwebber@dustycloud.org>.
* gnu/system/grub.scm (eye-candy): Add 'root-fs' parameter. Replace
'search --file' command in the output with whatever 'grub-root-search'
returns.
(grub-root-search): New procedure.
(grub-configuration-file): Add 'store-fs' parameter. Use
'grub-root-search' instead of hard-coded 'search --file' commands.
* gnu/system.scm (store-file-system,
operating-system-store-file-system): New procedures.
(operating-system-grub.cfg): Use it, and adjust call to
'grub-configuration-file'.
* tests/system.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
This is a followup to ab64483.
* gnu/system.scm (mapped-device-user): Check whether the title of FS is
'device before calling 'string=?'.
* gnu/system/vm.scm (virtualized-operating-system)[user-file-systems]:
Likewise.
Fixes <http://bugs.gnu.org/22176>.
Reported by Florian Paul Schmidt <mista.tapas@gmx.net>.
* gnu/system/file-systems.scm (<file-system>)[mount?]: New field.
(file-system->spec): Adjust accordingly.
* gnu/services/base.scm (file-system-dmd-service): Return the empty list
when FILE-SYSTEM has 'mount?' set to false.
(user-processes-service): Select the subset of FILE-SYSTEMS that matches
'file-system-mount?'.
* doc/guix.texi (File Systems): Document it.
Reported by 宋文武 <iyzsong@openmailbox.org>
at <https://lists.gnu.org/archive/html/guix-devel/2015-11/msg00096.html>.
* doc/guix.texi (System Installation): Comment out encrypted root
partition commands.
* gnu/system/examples/desktop.tmpl (mapped-devices): Remove.
(file-systems): Refer to the root by label.
* NEWS: Adjust.
* gnu/services.scm (system-derivation): New procedure.
(system-service-type): New variable.
(boot-script-entry): New procedure.
(boot-service-type): Extend SYSTEM-SERVICE-TYPE.
(etc-entry): New procedure.
(etc-service-type): Extend SYSTEM-SERVICE-TYPE.
(fold-services): Change default #:target-type to SYSTEM-SERVICE-TYPE.
* gnu/system.scm (operating-system-directory-base-entries): New procedure.
(essential-services): Use it. Add an instance of
SYSTEM-SERVICE-TYPE.
(operating-system-boot-script): Pass #:target-type to 'fold-services'.
(operating-system-derivation): Rewrite in terms of 'fold-services'.
* gnu/system/linux-container.scm (system-container): Remove.
(container-script): Use 'operating-system-derivation'.
* guix/scripts/system.scm (export-extension-graph): Replace
BOOT-SERVICE-TYPE by SYSTEM-SERVICE-TYPE.
* doc/images/service-graph.dot: Add 'system' node and edges.
* doc/guix.texi (Service Composition): Mention SYSTEM-SERVICE-TYPE.
(Service Reference): Document it. Update 'fold-services'
documentation.
* gnu/system/examples/desktop.tmpl: Add 'mapped-devices' field.
Use it in 'file-systems'.
* doc/guix.texi (System Installation): Suggest encrypted partitions.
Give an example of a command sequence.
* gnu/system/locale.scm (localedef-command)[maybe-version-directory]:
New procedure.
Use it.
(locale-directory): Rename to...
(single-locale-directory): ... this. Check the version of LIBC to
determine whether to create a "X.Y" sub-directory or to make it a
symlink to ".". Add the version number in the derivation name.
(locale-directory): New procedure.
(%default-locale-libcs): New variable.
* gnu/system.scm (<operating-system>)[locale-libcs]: New field.
(operating-system-locale-directory): Pass it to 'locale-directory'.
* doc/guix.texi (operating-system Reference): Document 'locale-libcs'.
(Locales)[Locale Data Compatibility Considerations]: New section.
Fixes a regression introduced in commit 0adfe95.
* gnu/system.scm (other-file-system-services)[requirements]: Remove.
[add-dependencies]: New procedure.
Use it.
* gnu/system/file-systems.scm (<file-system>)[dependencies]: Update
comment.
* gnu/services/base.scm (mapped-device->dmd-service-name,
dependency->dmd-service-name): New procedures.
(file-system-service-type): Use it.
On PCs, it means that it will typically choose resolutions higher
than 640x480, which is nicer.
* gnu/system/grub.scm (eye-candy)[setup-gfxterm-body]: Leave 'gfxmode'
unset.
* gnu/system/grub.scm (eye-candy): Accept additional 'system' argument. Add
local 'setup-gfxterm-body' variable. Replace the 'load_video' grub function
with 'setup_gfxterm', which includes everything in the 'if loadfont' form on
Intel systems, but is empty on non-Intel.
(grub-configuration-file): Pass 'system' to 'eye-candy.
This patch rewrites GuixSD services to make them extensible.
* gnu-system.am (GNU_SYSTEM_MODULES): Add gnu/services/dbus.scm.
* gnu/services.scm (<service>): Replace with new record type.
(<service-extension>, <service-type>): New record types.
(write-service-type, compute-boot-script, second-argument): New
procedures.
(%boot-service, boot-service-type): New variables.
(file-union, directory-union, modprobe-wrapper,
activation-service->script, activation-script,
gexps->activation-gexp): New procedures.
(activation-service-type, %activation-service): New variables.
(etc-directory, files->etc-directory, etc-service): New procedures.
(etc-service-type, setuid-program-service, firmware-service-type): New
variables.
(firmware->activation-gexp): New procedure.
(&service-error, &missing-target-service-error,
&ambiguous-target-service-error): New condition types.
(service-back-edges, fold-services): New procedures.
* gnu/services/avahi.scm (<avahi-configuration>): New record type.
(configuration-file): Replace keyword parameters with a single
'config' parameter.
(%avahi-accounts, %avahi-activation, avahi-service-type): New
variables.
(avahi-dmd-service): New procedure.
(avahi-service): Rewrite using 'service' and 'avahi-configuration'.
* gnu/services/base.scm (%root-file-system-dmd-service,
root-file-system-service-type): New variables.
(root-file-system-service): Use them.
(file-system->dmd-service-name): New procedure.
(file-system-service-type): New variable.
(file-system-service): Use it. Replace keyword parameters with a
single 'file-system' object.
(user-unmount-service-type): New variable.
(user-unmount-service): Use it.
(user-processes-service-type): New variable.
(user-processes-service): Use it.
(host-name-service-type): New variable.
(host-name-service): Use it.
(console-keymap-service-type): New variable.
(console-keymap-service): Use it.
(console-font-service-type): New variable.
(console-font-service): Use it.
(mingetty-pam-service, mingetty-dmd-service): New procedures.
(mingetty-service-type): New variable.
(mingetty-service): Use it.
(nscd-dmd-service): New procedure.
(nscd-activation, nscd-service-type): New variables.
(nscd-service): Use the latter.
(syslog-service-type): New variable.
(syslog-service): Use it.
(<guix-configuration>): New record type.
(%default-guix-configuration): New variable.
(guix-dmd-service, guix-accounts, guix-activation): New procedures.
(guix-service-type): New variable.
(guix-service): Replace list of keyword parameters with a single
'config' parameter. Rewrite using 'service'.
(<udev-configuration>): New record type.
(udev-dmd-service): New procedure.
(udev-service-type): New variable.
(udev-service): Use it.
(device-mapping-service-type): New variable.
(device-mapping-service): Use it.
(swap-service-type): New variable.
(swap-service): Use it.
* gnu/services/databases.scm (<postgresql-configuration>): New record
type.
(%postgresql-accounts, postgresql-activation): New variables.
(postgresql-dmd-service): New procedure.
(postgresql-service): Rewrite using 'service' and
'postgresql-configuration'.
* gnu/services/dbus.scm: New file.
* gnu/services/desktop.scm (dbus-configuration-directory, dbus-service):
Remove.
(wrapped-dbus-service): New procedure.
(<upower-configuration>): New record type.
(upower-configuration-file): Replace keyword parameters with single
<upower-configuration> parameter.
(%upower-accounts, %upower-activation): New variables.
(upower-dbus-service, upower-dmd-service): New procedures.
(upower-service-type): New variable.
(upower-service): Rewrite using 'service' and 'upower-configuration'.
(%colord-activation, %colord-accounts): New variables.
(colord-dmd-service): New procedure.
(colord-service-type): New variable.
(colord-service): Rewrite using 'service'.
(<geoclue-configuration>): New record type.
(geoclue-configuration-file): Replace keyword parameters with a single
'config' parameter.
(geoclue-dbus-service, geoclue-dmd-service): New procedures.
(%geoclue-accounts, geoclue-service-type): New variables.
(geoclue-service): Rewrite using 'service' and
'geoclue-configuration'.
(%polkit-accounts, %polkit-pam-services, polkit-service-type): New
variables.
(polkit-dmd-service): New procedure.
(polkit-service): Rewrite using 'service'.
(<elogind-configuration>)[elogind]: New field.
(elogind-dmd-service): New procedure.
(elogind-service-type): New variable.
(elogind-service): Rewrite using 'service'.
(%desktop-services): Remove argument to 'dbus-service'. Remove 'map'
over %BASE-SERVICES.
* gnu/services/dmd.scm (dmd-boot-gexp): New procedure.
(dmd-root-service-type, %dmd-root-service): New variables.
(dmd-service-type): New macro.
(<dmd-service>): New record type.
* gnu/services/lirc.scm (<lirc-configuration>): New record type.
(%lirc-activation): New variable.
(lirc-dmd-service): New procedure.
(lirc-service-type): New variable.
(lirc-service): Rewrite using 'service' and 'lirc-configuration'.
* gnu/services/networking.scm (<static-networking>): New record type.
(static-networking-service-type): New variable.
(static-networking-service): Rewrite using 'service' and
'static-networking'.
(dhcp-client-service-type): New variable.
(dhcp-client-service): Rewrite using 'service'.
(<ntp-configuration>): New record type.
(ntp-dmd-service): New procedure.
(ntp-service-type): New variable.
(ntp-service): New procedure.
(%tor-accounts, tor-service-type): New variable.
(tor-dmd-service): New procedure.
(tor-service): Rewrite using 'service'.
(<bitlbee-configuration>): New record type.
(bitlbee-dmd-service): New procedure.
(%bitlbee-accounts, %bitlbee-activation, bitlbee-service-type): New
variables.
(bitlbee-service): Rewrite using 'service'.
(%wicd-activation): New variable.
(wicd-dmd-service): New procedure.
(wicd-service-type): New variable.
(wicd-service): Rewrite using 'service'.
* gnu/services/ssh.scm (<lsh-configuration>): New record type.
(activation): Rename to...
(lsh-initialization): ... this.
(lsh-activation, lsh-dmd-service, lsh-pam-services): New procedures.
(lsh-service-type): New variable.
(lsh-service): Rewrite using 'service' and 'lsh-configuration'.
* gnu/services/web.scm (<nginx-configuration>): New record type.
(%nginx-accounts): New variable.
(nginx-activation, nginx-dmd-service): New procedures.
(nginx-service-type): New variable.
(nginx-service): Rewrite using 'service' and 'nginx-configuration'.
* gnu/services/xorg.scm (<slim-configuration>): New record type.
(slim-pam-service, slim-dmd-service): New procedures.
(slim-service-type): New variable.
(slim-service): Rewrite using 'service' and 'slim-configuration'.
* gnu/system.scm (file-union): Remove.
(other-file-system-services): Adjust to new 'file-system-service'
signature.
(essential-services): Add #:container? parameter. Add
%DMD-ROOT-SERVICE, %ACTIVATION-SERVICE, and calls to
'pam-root-service', 'account-service', 'operating-system-etc-service',
and a SETUID-PROGRAM-SERVICE instance.
(operating-system-services): Pass #:container? to 'essential-services.
(etc-directory): Remove.
(operating-system-etc-service): New procedure. Rewrite as a call to
'etc-service'.
(operating-system-accounts): Change to not return accounts required by
services.
(operating-system-etc-directory): Rewrite as a call to 'fold-services'
and 'etc-directory'.
(user-group->gexp, user-account->gexp, modprobe-wrapper): Remove.
(operating-system-activation-script): Rewrite as a call to
'fold-services' and 'activation-service->script'.
(operating-system-boot-script): Likewise.
(operating-system-derivation): Add call to 'lower-object'.
(emacs-site-file, emacs-site-directory, shells-file): Change to use
'computed-file' and 'scheme-file' instead of the monadic procedures.
* gnu/system/install.scm (cow-store-service-type): New variable.
(cow-store-service): Rewrite using 'service'.
(/etc/configuration-files): New procedure.
(configuration-template-service-type,
%configuration-template-service): New variables.
(configuration-template-service): Remove.
(installation-services): Adjust accordingly. Adjust argument to
'guix-service'.
* gnu/system/linux.scm (/etc-entry, pam-root-service): New procedures.
(pam-root-service-type): New variable.
* gnu/system/shadow.scm (user-group->gexp, user-account->gexp,
account-activation, etc-skel, account-service): New procedures.
(account-service-type): New variable.
* tests/services.scm: New file.
* doc/guix.texi (Base Services, Desktop Services): Adjust accordingly.
(Defining Services): Rewrite.
* doc/images/service-graph.dot: New file.
* doc.am (DOT_FILES): Add it.
* po/guix/POTFILES.in: Add gnu/services.scm.
* gnu/system/shadow.scm (default-skeletons): Use the non-monadic
procedures and turn into a regular procedure.
(skeleton-directory): Likewise.
* gnu/system.scm (etc-directory): Adjust accordingly.
* gnu/services/avahi.scm (configuration-file): Use 'plain-file' instead
of 'text-file'.
(avahi-service): Turn into a regular procedure that returns a <service>.
* gnu/services/base.scm (root-file-system-service, file-system-service,
user-unmount-service, user-processes-service, host-name-service,
console-keymap-service, console-font-service, mingetty-service,
nscd.conf-file, nscd-service): Likewise.
(%default-syslog.conf): New variable.
(syslog-service): Use it. Turn into a regular procedure.
(guix-service, udev-rules-union, kvm-udev-rule, udev-service,
device-mapping-service, swap-service): Likewise.
* gnu/services/databases.scm (%default-postgres-hba,
%default-postgres-ident): Use 'plain-file' instead of 'text-file'.
(%default-postgres-config): Use 'mixed-text-file' instead of
'text-file*'.
(postgresql-service): Use 'program-file' instead of 'gexp->script'.
Turn into a regular procedure.
* gnu/services/desktop.scm (dbus-configuration-directory): Use
'computed-file' instead of 'gexp->derivation'.
(upower-configuration-file, geoclue-configuration-file,
elogind-configuration-file): Use 'plain-file' instead of 'text-file'.
(dbus-service, upower-service, colord-service, geoclue-service,
polkit-service, elogind-service): Turn into regular procedures.
(%desktop-services): Remove use of 'mlet' when iterating on
%BASE-SERVICES.
* gnu/services/lirc.scm (lirc-service): Turn into a regular procedure.
* gnu/services/networking.scm (static-networking-service,
dhcp-client-service, ntp-service, tor-service, bitlbee-service,
wicd-service): Likewise.
* gnu/services/ssh.scm (lsh-service): Likewise.
* gnu/services/web.scm (nginx-service): Likewise.
* gnu/services/xorg.scm (xorg-configuration-file): Use 'mixed-text-file'
instead of 'text-file*'.
(xorg-start-command, slim-service): Turn into regular procedures.
(xinitrc): Use 'program-file' instead of 'gexp->script'.
* gnu/system/install.scm (cow-store-service,
configuration-template-service): Turn into regular procedures.
* gnu/system.scm (other-file-system-services, device-mapping-services,
swap-services, essential-services, operating-system-services,
user-shells, operating-system-accounts): Remove now unnecessary
'mlet' and turn into regular procedures.
(operating-system-etc-directory, operating-system-activation-script,
operating-system-boot-script): Adjust accordingly.
* doc/guix.texi (Base Services, Networking Services, X Window, Desktop
Services, Database Services, Web Services, Various Services, Name
Service Switch): Adjust accordingly.
* gnu/services/base.scm (mingetty-service): Change default value of
#:motd from a monadic value to a <plain-file>. Assume MOTD to be a
file-like object. Assume LOGIN-PROGRAM is a gexp or #f.
(%base-services): Use 'plain-file' instead of 'text-file' for motd.
* gnu/system/linux.scm (unix-pam-service): Update docstring to mention
that MOTD is a file-like object.
* doc/guix.texi (Base Services): Adjust 'mingetty-service' documentation
accordingly.
* gnu/system/install.scm (installation-services): Adjust accordingly.
(log-to-info): Use 'program-file' instead of 'gexp->script'.
* gnu/packages/base.scm (glibc)[arguments]: Append VERSION to
'libc_cv_localedir'.
* gnu/system/locale.scm (localedef-command): Write to the sub-directory
called (package-version libc) in #$output.
(locale-directory): Create said directory.
* doc/guix.texi (Locales): Mention the per-version sub-directory.
Suggested by Petter <petter@mykolab.ch>
and Mark H Weaver <mhw@netris.org>.
Partly fixes <http://bugs.gnu.org/19190>.
* gnu/system/linux-initrd.scm (base-initrd)[linux-modules]: Add dm-crypt
and xts.
Suggested by Petter <petter@mykolab.ch>
and Mark H Weaver <mhw@netris.org>.
Reported by Duncan Keall <duncan@duncankeall.com>.
Partly fixes <http://bugs.gnu.org/19190> by populating /dev/mapper
early enough.
* gnu/build/linux-boot.scm (mount-essential-file-systems): Mount /dev as
a devtmpfs.
(move-essential-file-systems): Add /dev.
(mount-root-file-system): Mount /rw-root/dev as a devtmpfs instead of
calling 'make-essential-device-nodes'.
(boot-system): Remove call to 'make-essential-device-nodes'.
* gnu/system/file-systems.scm (%devtmpfs-file-system): Remove.
* doc/guix.texi (File Systems): Adjust accordingly.
* gnu/services/base.scm (mingetty-service): Change default value of
#:motd from a monadic value to a <plain-file>. Assume MOTD to be a
file-like object. Assume LOGIN-PROGRAM is a gexp or #f.
(%base-services): Use 'plain-file' instead of 'text-file' for motd.
* gnu/system/linux.scm (unix-pam-service): Update docstring to mention
that MOTD is a file-like object.
* doc/guix.texi (Base Services): Adjust 'mingetty-service' documentation
accordingly.
* gnu/packages/admin.scm (wpa-supplicant-light): Rename to ...
(wpa-supplicant-minimal): ...this.
(wpa-supplicant): Use it.
* gnu/system/install.scm (installation-os): Use it.
* doc/guix.texi (Locales): Introduce "codeset".
<%default-locale-definitions>: Mention the "normalized codeset", with
an xref to libc's manual.
* gnu/system/locale.scm (%default-locale-definitions)[utf8-locale]:
Mention the "normalized codeset" in a comment.
* gnu/build/vm.scm (<partition>): New record type.
(fold2): New procedure.
(initialize-partition-table): Remove #:bootable? and
'partition-size' parameters. Add 'partitions' parameter. Invoke 'parted'
with '--script'.
(initialize-root-partition): Remove.
(initialize-partition, root-partition-initializer): New procedures.
(initialize-hard-disk): Remove #:system-directory, #:disk-image-size,
#:file-system-type, #:file-system-label, #:closures, #:copy-closures?,
#:bootable?, and #:register-closures? parameters. Add #:partitions.
Rewrite to use 'initialize-partition' for each item of PARTITIONS.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Add (guix records)
to #:modules default value.
(qemu-image): Adjust accordingly.
* gnu/build/vm.scm (initialize-root-partition, initialize-hard-disk): Use the
'umount' procedure instead of invoking the 'umount' command.
* gnu/system/vm.scm (qemu-image): Remove UTIL-LINUX from INPUTS.
* gnu/system.scm (<operating-system>)[kernel-arguments]: New field.
(operating-system-grub.cfg): Honor it.
(operating-system-parameters-file): Add 'kernel-arguments' to the parameters
file.
* guix/scripts/system.scm (previous-grub-entries)[system->grub-entry]: Read
the 'kernel-arguments' field of the parameters file, when available.
* gnu/system/vm.scm (system-qemu-image/shared-store-script):
Use (operating-system-kernel-arguments os) in '-append'.
* doc/guix.texi (operating-system Reference): Document it.
* gnu/system/install.scm (self-contained-tarball): Pass "--mtime=@0". The
only files whose mtime was not already were those in /var/guix and
/gnu/store/.links.
Fixes <http://bugs.gnu.org/19778>.
Reported by Mark H Weaver <mhw@netris.org>.
* gnu/system/file-systems.scm (%uuid-rx): New variable.
(string->uuid): New procedure.
(uuid): New macro.
* tests/file-systems.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
* doc/guix.texi (File Systems): Give an example of UUID.
This bug was introduced in commit 85c3127.
Thanks to Christopher Webber for reporting it.
* gnu/syste/linux-initrd.scm (base-initrd): Include (guix build syscalls)
module in derivation.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Likewise.
* gnu/build/linux-initrd.scm (write-cpio-archive): Remove 'open-pipe*' and
related calls. Compute list of files in 'files' variable. Use
'cpio:write-cpio-archive'. Remove #:cpio parameter.
(build-initrd): Remove #:cpio parameter.
* gnu/system/linux-initrd.scm (expression->initrd): Likewise, and adjust
BUILDER accordingly. Add (guix cpio) to #:modules.
Fixes <http://bugs.gnu.org/20791>.
Reported by Benz Schenk <benz.schenk@uzh.ch>.
* gnu/system/install.scm (installation-services): Add #:rules argument for
'udev-service'.
Suggested by Thomas Schwinge <thomas@codesourcery.com>.
* gnu/system/install.scm (self-contained-tarball): Remove
"/root/.guix-profile" from the 'tar' arguments.
* doc/guix.texi (Binary Installation): Add a step to create
~root/.guix-profile.
* gnu/system/shadow.scm (%base-user-accounts): New variable.
* gnu/system.scm (<operating-system>)[users]: Use it as the default value.
* gnu/system/examples/bare-bones.tmpl (users): Use it.
* gnu/system/examples/desktop.tmpl (users): Likewise.
* doc/guix.texi (operating-system Reference, User Accounts): Adjust
accordingly.
Fixes <http://bugs.gnu.org/20646>.
Reported by David Thompson <davet@gnu.org>.
* gnu/system/shadow.scm (assert-valid-users/groups): New procedure
* gnu/system.scm (operating-system-activation-script): Use it.
* tests/guix-system.sh (make_user_config): New function.
Add 3 tests using it.
* po/guix/POTFILES.in: Add gnu/system/shadow.scm.
Fixes a thinko introduced in 175ced4.
* gnu/system/install.scm (self-contained-tarball): Use "root:0" as the
owner and group.
* doc/guix.texi (Binary Installation): Revert 175ced4.
Suggested by Andreas Enge <andreas@enge.fr>
at <http://lists.gnu.org/archive/html/guix-devel/2015-05/msg00220.html>.
* gnu/system/install.scm (self-contained-tarball): Pass --owner and
--group to 'tar'.
* doc/guix.texi (Binary Installation): Move group and account creation
before extraction. Make "run the daemon" a separate step.
* doc/guix.texi (Using the Configuration System): Add xref to "X.509
Certificates".
(X.509 Certificates): New section.
* gnu/system/examples/desktop.tmpl: Use NSS-CERTS.
* gnu/system/install.scm (configuration-template-service): Remove
'local-template' and 'template'. Add 'search' and 'templates'.
[activate]: Copy all of TEMPLATES to /etc/configuration.
* doc/guix.texi (System Installation): Adjust file name accordingly.
* gnu/system/examples/bare-bones.tmpl: Change 'packages' and
'host-name'. Remove D-Bus, Avahi, and SLiM services, and add lsh
instead.
* gnu/system/examples/desktop.tmpl: New file.
* Makefile.am (EXAMPLES): Add it.
Suggested by Pjotr Prins <pjotr.public12@thebird.nl>
at <http://lists.gnu.org/archive/html/guix-devel/2015-04/msg00229.html>.
* gnu/build/install.scm (populate-single-profile-directory): New procedure.
* gnu/system/install.scm (self-contained-tarball): New procedure.
* Makefile.am (guix-binary.%.tar.xz): New target.
Fixes <http://bugs.gnu.org/20037>.
Reported by 宋文武 <iyzsong@gmail.com> and Tomáš Čech.
* gnu/system.scm (operating-system-etc-directory): Remove call to
'delete-duplicates'.
* gnu/system/linux.scm (pam-services->directory)[builder]: Add call to
'delete-duplicates'.
* gnu/packages/admin.scm (wpa-supplicant-light): New variable containing the
previous dbus-free package, but renamed. Remove outdated TODO comments.
(wpa-supplicant): Now inherits from wpa-supplicant-light but adds dbus
support.
* gnu/system/install.scm (installation-os): Use wpa-supplicant-light.
This reverts commit 3b09332adf, which
turned out to be a bad idea because we need to have dependency
information between the device-mapping service and the file-system
service that uses it.
* gnu/system/file-systems.scm (<mapped-device>)[needed-for-boot?]: New
field.
* gnu/system.scm (operating-system-user-mapped-devices,
operating-system-boot-mapped-devices): Use it instead of trying to
guess. Guessing doesn't work when one refers to a partition using its
label, for instance.
* doc/guix.texi (Mapped Devices): Document 'needed-for-boot?'.
* gnu/system/linux-initrd.scm (flat-linux-module-directory)[build-exp]:
Add 'lookup' procedure. Use 'recursive-module-dependencies' to
compute the list of modules to copy.
Adjust #:modules parameter.
* gnu/system/locale.scm: New file.
* gnu-system.am (GNU_SYSTEM_MODULES): Add it.
* gnu/system.scm (<operating-system>)[locale]: Change the default to
"en_US.utf8".
(operating-system-locale-directory): New procecure.
(operating-system-derivation): Use it.
* doc/guix.texi (Using the Configuration System): Change example locale
to "fr_FR.utf8".
(operating-system Reference): Add xref to "Locales". Document
'locale-definitions'.
(Locales): New section.
* po/guix/POTFILES.in: Add gnu/system.scm.
Reported by Nikita Karetnikov.
* gnu/system/file-systems.scm (<file-system>): Rename 'needed-for-boot?'
accessor to '%file-system-needed-for-boot?'.
(file-system-needed-for-boot?): New inlinable procedure.
* gnu/system.scm (other-file-system-services)[file-systems]: Rely on
'file-system-needed-for-boot?' to handle the "/" case.
(operating-system-initrd-file)[boot-file-systems]: Likewise.
* gnu/system/vm.scm (<file-system-mapping>): New record type.
(%store-mapping): New variable.
(host-9p-file-system): Rename to...
(mapping->file-system): ... this. Replace 'source' and 'target'
parameters with 'mapping'. Set 'flags' field.
(virtualized-operating-system): Add 'mappings' parameter and honor
it.
(system-qemu-image/shared-store-script): Add 'mappings' parameter.
Pass it to 'virtualized-operating-system'. Use it in argument to
'common-qemu-options'.
* gnu/system/vm.scm (file-system->mount-tag, host-9p-file-system): New
procedures.
(virtualized-operating-system): Use 'host-9p-file-system' for the
store.
(common-qemu-options): Add 'shared-fs' parameter.
[virtfs-option]: New procedure.
Use it.
(system-qemu-image/shared-store-script): Adjust accordingly.
* gnu/artwork.scm: New file.
* gnu-system.am (GNU_SYSTEM_MODULES): Add it.
* gnu/services/xorg.scm: Use it.
(%artwork-repository): Remove.
* gnu/system/grub.scm: Use it.
(%artwork-repository): Remove.
* gnu/services/base.scm (user-unmount-service): New procedure.
* gnu/system.scm (essential-services): Use it.
* gnu/system/install.scm (cow-store-service): Mention it in comment.
* gnu/system/grub.scm (<grub-image>, <grub-theme>): New record types.
(%artwork-repository, %background-image): New variables.
(<grub-configuration>)[theme]: New field.
(svg->png, resize-image, grub-background-image, eye-candy): New
procedures.
(grub-configuration-file): Use 'eye-candy' and add it in BUILDER.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Add "$@" at
the end of the script.
(common-qemu-options): Remove trailing newline.
* doc/guix.texi (Invoking guix system): Document it.
* gnu/system/vm.scm (system-qemu-image/shared-store): Add
#:disk-image-size and #:full-boot? parameters and honor them. Pass
'#:copy-inputs? full-boot?', and change #:inputs argument.
* guix/scripts/system.scm (system-derivation-for-action): Pass
#:disk-image-size to 'system-qemu-image/shared-store'.
* doc/guix.texi (Invoking guix system): Mention use of '--image-size' in
conjunction with '--full-boot'.
This fixes regressions introduced in de1c158 ("system: Add support for
boot-time mapped devices.").
* doc/guix.texi (Initial RAM Disk): Adjust example with custom use of
'base-initrd'. Document #:mapped-devices parameter of 'base-initrd'.
* gnu/system/vm.scm (system-disk-image, system-qemu-image,
virtualized-operating-system): Adjust call to 'base-initrd' to new
signature.
* gnu/build/linux-boot.scm (boot-system): Add #:pre-mount parameter and
honor it.
* gnu/system/linux-initrd.scm (base-initrd): Add #:mapped-devices
parameter. Add 'device-mapping-commands' variable, and use it to
build the #:pre-mount argument of 'boot-system'.
* gnu/system.scm (mapped-device-user,
operating-system-user-mapped-devices,
operating-system-boot-mapped-devices): New procedures.
(device-mapping-services): Use 'operating-system-user-mapped-devices'
instead of 'operating-system-mapped-devices'.
(operating-system-initrd-file): Call the initrd with #:mapped-devices.
* gnu/services/base.scm (kvm-udev-rule): New procedure.
(udev-service): Use it, and add it to RULES.
(guix-build-accounts): Add "kvm" to the 'supplementary-groups' field.
* gnu/system/shadow.scm (%base-groups): Add "kvm".
* gnu/system/file-systems.scm (<mapped-device-type>): New record type.
(<mapped-device>)[command]: Remove field.
[type]: New field.
* gnu/services/base.scm (device-mapping-service): Rename 'command'
parameter to 'open'. Add 'close' parameter and honor it.
* gnu/system.scm (luks-device-mapping): Rename to...
(open-luks-device): ... this.
(close-luks-device): New procedure.
(luks-device-mapping): New variable.
(device-mapping-services): Get the type of MD, and pass its 'open' and
'close' fields to 'device-mapping-service'.
* gnu/system/file-systems.scm (<mapped-device>): New record type.
* gnu/system.scm (<operating-system>)[mapped-devices]: New field.
(luks-device-mapping): New procedure.
(other-file-system-services)[device-mappings, requirements]: New
procedures. Pass #:requirements to 'file-system-service'.
(device-mapping-services): New procedure.
(essential-services): Use it. Append its result to the return value.
(operating-system-initrd-file): Add comment.
* gnu/services/base.scm (file-system-service): Add #:requirements
parameter and honor it.
(device-mapping-service): New procedure.
* gnu/system/linux-initrd.scm (base-initrd): Add comment.
* gnu/system/linux-initrd.scm (expression->initrd): Remove #:linux and
#:linux-modules parameters. Remove call to
'float-linux-module-directory'.
(base-initrd): Add call to 'float-linux-module-directory'. Use it in
#:linux-modules argument in the gexp. Remove #:linux and
#:linux-modules arguments to 'expression->initrd'.
* gnu/build/linux-initrd.scm (build-initrd): Remove
#:linux-module-directory parameter. Don't create 'modules'
sub-directory.
* gnu/build/linux-boot.scm (boot-system): Mentin that LINUX-MODULES is a
list of absolute file names. Don't prepend "/modules/" to
LINUX-MODULES.
* doc/guix.texi (Initial RAM Disk): Adjust accordingly.
* gnu/build/linux-initrd.scm (cache-compiled-file-name,
compile-to-cache, build-initrd): New procedures.
* gnu/system/linux-initrd.scm (expression->initrd)[builder]: Remove code
now moved above. Use 'build-initrd'.
* gnu/system/linux-initrd.scm (expression->initrd): Remove calls to
'imported-modules' and 'compiled-modules'. Use 'gexp->script' with
EXP. Add the result to TO-COPY. Make /init a symlink to that script,
and copy its closure into the "contents" directory. Add fake
/proc/self/exe symlink.
* gnu/build/linux-boot.scm (load-linux-module*): Add comment about mmap.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Add "-m
256". This turns out to be needed for initrds containing things like
e2fsck and several modules; with the default of 128 MiB, loading
libahci.ko may fail with -1.
* gnu/system/linux-initrd.scm (expression->initrd): Add 'graph-files'.
Use (guix build store-copy) and 'populate-store' instead of local
hack. Pass #:references-graphs to 'gexp->derivation'.
* guix/gexp.scm (lower-reference-graphs): New procedure.
(gexp->derivation)[graphs-file-names]: New procedure.
Use 'lower-reference-graphs', and augment #:inputs argument as a
function of #:references-graphs.
* doc/guix.texi (G-Expressions): Adjust 'gexp->derivation' documentation
accordingly.
* tests/gexp.scm ("gexp->derivation, store copy"): Remove reference to
TWO in BUILD-DRV. Use TWO directly in #:references-graphs argument.
("gexp->derivation #:references-graphs"): New test.
* gnu/system/vm.scm (qemu-image): Remove variable 'graph'; use INPUTS as
the #:references-graphs argument to
'expression->derivation-in-linux-vm'.
* gnu/system/linux-initrd.scm (expression->initrd)[string->regexp]:
Remove.
Use 'flat-linux-module-directory'. Remove the equivalent logic from
'builder'.
(flat-linux-module-directory): New procedure.
* gnu/build/linux-initrd.scm: New file.
* gnu-system.am (GNU_SYSTEM_MODULES): Add it.
* gnu/system/linux-initrd.scm (expression->initrd): Use (gnu build
linux-initrd) and 'write-cpio-archive' instead of the inlined code.
Suggested by Mark H. Weaver.
* gnu/system/shadow.scm (<user-group>)[system?]: New field.
(%base-groups): Introduce 'system-group' macro, and use it.
* gnu/system.scm (user-group->gexp): Pass the 'system?' field.
* guix/build/activation.scm (add-group): Add #:system? and honor it.
(activate-users+groups): Handle the 'system?' field.
* gnu/system/file-systems.scm (%tty-gid): Choose an ID below 1000.
* doc/guix.texi (User Accounts): Document the 'system?' field.
* gnu/services/base.scm (unicode-start, console-font-service): New
procedures.
(%base-services): Call 'console-font-service' for TTY1 to TTY6.
* gnu/system/install.scm (installation-services): Add comment about the
console font. Call 'console-font-service' for TTY1 to TTY6.
This fixes a bug whereby, if #:allow-root-passwords was #f, 'groupadd'
would ask for a password. This is particularly problematic during
activation.
* gnu/system/linux.scm (rootok-pam-service): New procedure.
(base-pam-services): Use it for all the user* and group* commands.
* gnu/system/shadow.scm (<user-account>)[system?]: New field.
* gnu/system.scm (user-account->gexp): Add it.
* guix/build/activation.scm (add-user): Add #:system? parameter and
honor it.
(activate-users+groups): Handle the 'system?' part of user tuples.
Pass it to 'add-user'. Don't create PROFILE-DIR when SYSTEM? is
true.
* gnu/services/dbus.scm (dbus-service): Add 'system?' field for
"messagebus" account.
* gnu/services/base.scm (guix-build-accounts): Likewise.
* gnu/services/avahi.scm (avahi-service): Likewise.
* gnu/system.scm (<operating-system>)[packages]: Change default value to
%BASE-PACKAGES.
(%base-packages): New variable.
* gnu/system/install.scm (installation-os): Use it when defining the
'packages' field.
* doc/guix.texi (Using the Configuration System): Use %BASE-PACKAGES in
example. Remove now unneeded module imports. Explain this.
* gnu/system/file-systems.scm (<file-system>)[title]: New field.
* gnu/services/base.scm (file-system-service): Add #:title parameter.
In 'start' gexp, use 'canonicalize-device-spec' and honor TITLE.
* gnu/system.scm (other-file-system-services,
operating-system-root-file-system, operating-system-initrd-file):
Adjust accordingly.
* gnu/system/linux-initrd.scm (file-system->spec): Likewise.
* gnu/system/vm.scm (system-disk-image): Add 'title' field for the root
file system.
* guix/build/linux-initrd.scm (mount-file-system): Expect the second
element of SPEC to be the title.
(boot-system)[root-mount-point?, root-fs-type]: Likewise.
* gnu/services/dmd.scm (dmd-configuration-file): Select
'canonicalize-device-spec'.
* gnu/system/vm.scm (system-disk-image)[root-label]: New variable.
Use it for the root file system, and pass it as #:file-system-label to
'qemu-image'.
* guix/build/vm.scm (format-partition): Add #:label parameter, and honor
it.
(initialize-hard-disk): Add #:file-system-label parameter, and pass it
to 'format-partition'.
* gnu/system/vm.scm (qemu-image): Add #:file-system-label parameter and
pass it to 'initialize-hard-disk'.
* guix/build/vm.scm (load-in-linux-vm): When MAKE-DISK-IMAGE?, use
'-drive ...,if=virtio' for better performance.
* gnu/system/vm.scm (qemu-image): Use /dev/vda instead of /dev/sda.
This fixes a circular dependency between (gnu system) and (gnu system
linux-initrd), where the latter could end up being compiled before
'file-system-type' was defined as a macro.
* gnu/system.scm (<file-system>, %fuse-control-file-system,
%binary-format-file-system): Move to...
* gnu/system/file-systems.scm: ... here. New file.
* build-aux/hydra/demo-os.scm, gnu/system/linux-initrd.scm,
gnu/system/vm.scm: Use it.
* gnu-system.am (GNU_SYSTEM_MODULES): Add it.
* gnu/system/grub.scm (<grub-configuration>): New record type.
(grub-configuration-file): Add 'config' parameter; remove
#:default-entry and #:timeout. Honor CONFIG.
* gnu/system.scm (<operating-system>): Remove 'bootloader-entries'
field; remove default value for 'bootloader' field.
(operating-system-grub.cfg): Pass the 'bootloader' field to
'grub-configuration-file'.
* build-aux/hydra/demo-os.scm (bootloader): New field.
* gnu/system.scm (etc-directory): Change default value of #:profile.
Change contents of SHELLS. Use /run/current-system/profile/{s,}bin in
BASHRC.
(operating-system-boot-script)[%modules]: Add (guix build
linux-initrd). Add call to 'activate-current-system' in gexp.
(operating-system-initrd-file, operating-system-grub.cfg): New
procedures.
(operating-system-derivation): Don't build grub.cfg here and remove it
from the file union.
* gnu/system/vm.scm (qemu-image): Remove #:populate.
(operating-system-build-gid, operating-system-default-contents):
Remove.
(system-qemu-image): Remove call to
'operating-system-default-contents'. Use 'operating-system-grub.cfg'
to get grub.cfg. Add GRUB.CFG to #:inputs.
(system-qemu-image/shared-store): Likewise, but don't add GRUB.CFG to
#:inputs.
(system-qemu-image/shared-store-script): Pass --system kernel option.
* guix/build/activation.scm (%booted-system, %current-system): New
variables.
(boot-time-system, activate-current-system): New procedures.
* guix/build/install.scm (evaluate-populate-directive): Add case
for ('directory name uid gid mode).
(directives, populate-root-file-system): New procedures.
* guix/build/vm.scm (initialize-hard-disk): Replace calls to
'evaluate-populate-directive' by a call to
'populate-root-file-system'.
* gnu/services/dmd.scm (dmd-configuration-file): Use
/run/current-system/profile/bin.
* gnu/services/xorg.scm (slim-service): Likewise.
* gnu/system/vm.scm (qemu-image): Rename #:inputs-to-copy to #:inputs,
and #:initialize-store? to #:register-closures?. Add #:copy-inputs?.
Adjust build gexp accordingly.
(system-qemu-image): Remove #:initialize-store? argument and add
#:copy-inputs?.
(system-qemu-image/shared-store): Add #:inputs, #:register-closures?,
and #:copy-inputs? arguments.
* guix/build/vm.scm (register-closure): New procedure.
(MS_BIND): New variable.
(initialize-hard-disk): Rename #:initialize-store? to
#:register-closures?, #:closures-to-copy to #:closures, and add
#:copy-closures?.
Add 'target-directory' and 'target-store' variables.
Call 'populate-store' only when COPY-CLOSURES?.
Bind-mount the store to TARGET-STORE when REGISTER-CLOSURES? and not
COPY-CLOSURES?. Add call to 'register-closure'.
* gnu/system/vm.scm (virtualized-operating-system): Instead of
completely overriding 'file-systems', use 'remove' to filter out some
of those declared in OS.
(system-qemu-image): Likewise.
* gnu/system.scm (operating-system-derivation)[boot-file-systems]: Keep "/".
* gnu/system/linux-initrd.scm (file-system->spec): Keep the 'check?'
flag.
(qemu-initrd)[helper-packages]: New variable. Pass it as #:to-copy.
<gexp>: Add 'set-path-environment-variable' call. Remove #:unionfs
argument for 'boot-system'.
* gnu/system/vm.scm (%linux-vm-file-systems): Add 'check?' field/
(virtualized-operating-system): Likewise for the "9p" file system.
* guix/build/linux-initrd.scm (mount-root-file-system): Change #:unionfs
default. Call 'check-file-system' before mounting ROOT, when
VOLATILE-ROOT? is false.
(check-file-system): New procedure.
(mount-file-system): Honor 'check?' element in list; add
'check-file-system' call.
(boot-system): Remove #:root-fs-type and #:unionfs parameters.
[root-mount-point?, root-fs-type]: New variables.
Call 'mount-file-system' on all MOUNTS but "/".
Fixes a regression introduced in 83bcd0b.
* gnu/system/vm.scm (system-qemu-image): Override the 'file-systems'
field of OS. Add #:file-system-type parameter and honor it.
* gnu/system.scm (<operating-system>)[initrd]: Default to
'qemu-initrd'.
(<file-system>): New record type.
(operating-system-root-file-system): New procedure.
(operating-system-derivation): Take the device name for GRUB from
'operating-system-root-file-system'. Pass the
'operating-system-initrd' procedure the list of boot file systems.
* gnu/system/linux-initrd.scm (file-system->spec): New procedure.
(qemu-initrd): Add 'file-systems' parameter, and remove #:mounts
parameter.
[file-system-type-predicate]: New procedure.
[linux-modules]: Use it.
Adjust #:mounts argument in 'boot-system' call.
(gnu-system-initrd): Remove.
* gnu/system/vm.scm (%linux-vm-file-systems): New variable.
(expression->derivation-in-linux-vm): Adjust call to 'qemu-initrd'.
(virtualized-operating-system): New procedure.
(system-qemu-image/shared-store-script)[initrd]: Remove. Use
'virtualized-operating-system'. Get the 'initrd' file from OS-DRV.
* guix/build/linux-initrd.scm (mount-qemu-smb-share, mount-qemu-9p):
Remove.
(MS_RDONLY, MS_BIND): New global variables.
(bind-mount): Remove local 'MS_BIND' definition.
(mount-root-file-system): New procedure, with code formerly in
'boot-system'.
(mount-file-system): New procedure.
(boot-system): Add #:root-fs-type parameter. Remove 'MS_RDONLY' local
variable. Use 'mount-root-file-system' and 'mount-file-system'.
* doc/guix.texi (Using the Configuration System): Add 'file-system'
declaration.
* gnu/system.scm (<operating-system>)[groups]: Change default to just
the 'root' group.
[sudoers]: New field.
(etc-directory): Add #:sudoers parameter. Add 'sudoers' to the
file union.
(operating-system-etc-directory): Pass #:sudoers to 'etc-directory'.
(%setuid-programs): Add 'sudo'.
(%sudoers-specification): New variable.
* gnu/system/linux.scm (base-pam-services): Add 'sudo'.
* build-aux/hydra/demo-os.scm: Add 'groups' field; add 'guest' to the
'wheel' group.
* gnu/system.scm (<operating-system>)[pam-services, setuid-programs]:
New fields.
(etc-directory)[bashrc]: Prepend /run/setuid-programs to $PATH.
(operating-system-etc-directory): Honor
'operating-system-pam-services'.
(%setuid-programs): New variable.
(operating-system-boot-script): Add (guix build utils) to the set of
imported modules. Call 'activate-setuid-programs' in boot script.
* gnu/system/linux.scm (base-pam-services): New procedure.
* guix/build/activation.scm (%setuid-directory): New variable.
(activate-setuid-programs): New procedure.
* build-aux/hydra/demo-os.scm: Add 'pam-services' field.
* gnu/system/linux-initrd.scm (expression->initrd): Rename 'inputs'
parameter to 'to-copy'. Remove 'files-to-copy'. Rewrite 'builder' as
a gexp, and use 'gexp->derivation'.
(qemu-initrd): Adjust accordingly.
* gnu/services.scm (<service>)[inputs]: Remove.
* gnu/system.scm (links): Remove.
(etc-directory): Add PASSWD and SHADOW to #:inputs.
(operating-system-boot-script): Pass ETC to 'dmd-configuration-file'.
(operating-system-derivation): Remove EXTRAS from the union.
* gnu/system/linux.scm (pam-service->configuration): Rewrite in terms of
'gexp->derivation'. Compute the contents on the build side. Expect
'arguments' to contain a list of gexps.
(pam-services->directory): Rewrite in terms of 'gexp->derivation'.
(unix-pam-service): Change 'arguments' to a list of one gexp.
* gnu/system/shadow.scm (<user-account>)[inputs]: Remove.
[shell]: Change default value to a gexp.
(passwd-file): Rewrite in terms of 'gexp->derivation'. Compute
contents on the build side.
* gnu/services/base.scm (host-name-service, mingetty-service,
nscd-service, syslog-service, guix-service): Change 'start' and 'stop'
to gexps; remove 'inputs' field.
(guix-build-accounts): Change 'shell' field to a gexp.
* gnu/services/networking.scm (static-networking-service): Change
'start' and 'stop' to gexps; remove 'inputs' field.
* gnu/services/xorg.scm (slim-service): Likewise.
* gnu/services/dmd.scm (dmd-configuration-file): Expect ETC to be a
derivation. Change 'config' to a gexp. Use 'gexp->file' instead of
'text-file'.
* doc/guix.texi (Defining Services): Update nscd example with gexps, and
without 'inputs'. Add xref to "G-Expressions".
* gnu/system.scm (operating-system-boot-script): Use 'gexp->file'
instead of 'text-file*'.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Likewise.
(system-qemu-image/shared-store-script)[builder]: Turn into a gexp.
Use 'gexp->derivation' instead of 'derivation-expression'.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Move
'initrd' definition to the top-level. Have a single definition of
'initrd', 'image', and 'os-drv'.
* guix/build/linux-initrd.scm (make-essential-device-nodes): Make
/dev/fuse.
(boot-system): Add #:unionfs parameter. Invoke UNIONFS instead of
copying files over when VOLATILE-ROOT? is true.
* gnu/system/linux-initrd.scm (expression->initrd): Add #:inputs
parameter.
[files-to-copy]: New procedure.
[builder]: Add 'to-copy' parameter; honor it.
(qemu-initrd)[linux-modules]: Add 'fuse.ko' when VOLATILE-ROOT?.
Pass UNIONFS-FUSE/STATIC as #:inputs; change builder to pass #:unionfs
to 'boot-system'.
* gnu/system/vm.scm (input->name+output): New procedure.
(expression->derivation-in-linux-vm): Use it for 'input-alist'.
(qemu-image)[input->name+derivation]: Remove. Use
'input->name+output' instead.
* gnu/system/vm.scm (system-qemu-image/shared-store-script): Change
#:qemu to default to QEMU. Change INITRD to use a 9p mount for the
store. Change command-line to use -virtfs.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Change #:qemu
to default to QEMU-HEADLESS. Use "-net nic,model=virtio". Remove
"-net user,smb=..." and add "-virtfs" options. Change default initrd
to include two 9p mounts.
* gnu/packages/gcc.scm (gcc-4.7): Change /nix/store in comment.
* gnu/system/vm.scm (operating-system-default-contents):
Use (%store-prefix) instead of "/nix/store".
* guix/derivations.scm (derivation-path->output-path,
derivation-path->output-paths): Change to /gnu/store in docstring.
* gnu/system/dmd.scm (xorg-service)[xserver.conf]: Change to use
'text-file*' instead of 'text-file'.
Adjust body accordingly. Remove now extraneous packages from the
service's 'inputs' field.
* gnu/system/vm.scm (operating-system-default-contents): Populate
/run/current-system and create /bin/sh.
* gnu/system.scm (operating-system-profile-derivation,
operating-system-profile-directory): New procedures.
(operating-system-derivation): Use it.
* gnu/system/linux-initrd.scm (qemu-initrd)[virtio-9p-modules]: New
variable.
[linux-modules]: Append VIRTIO-9P-MODULES when a 9p file system is in
MOUNTS.
* guix/build/linux-initrd.scm (mount-qemu-9p): New procedure.
(boot-system): Recognize '9p' in MOUNTS, and use 'mount-qemu-9p'.
* guix/build/linux-initrd.scm (make-essential-device-nodes): Rename
devices with major = 8 to /dev/sda*. Make /dev/vda* devices.
* gnu/system/vm.scm (qemu-image): Change '/dev/vda' to '/dev/sda'.
* gnu/system.scm (operating-system-derivation): Likewise.
* guix/build/linux-initrd.scm (boot-system): New procedure.
* gnu/system/linux-initrd.scm (qemu-initrd): Add keyword parameters
'guile-modules-in-chroot?' and 'mounts'. Change builder to simply
call 'boot-system'.
(gnu-system-initrd): Change to a simple call to 'qemu-initrd'.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Call
'qemu-initrd' with #:guile-modules-in-chroot?.
* gnu/packages/linux-initrd.scm: Remove.
* gnu/system/linux-initrd.scm: New file.
* gnu-system.am (GNU_SYSTEM_MODULES): Adjust accordingly.
* gnu/system.scm (<operating-system>): Change default 'initrd' value
to (gnu-system-initrd).
(operating-system-derivation): Bind 'operating-system-initrd'. Pass
'menu-entry' an initrd file name instead of a package.
* gnu/system/grub.scm (grub-configuration-file): Expect 'initrd' to be
file name.
* gnu/packages/version-control.scm, gnu/packages/vim.scm,
gnu/system.scm, gnu/system/dmd.scm, gnu/system/shadow.scm,
gnu/system/vm.scm: Change references to (gnu packages system) to (gnu
packages admin).
This is a followup to commit 4aeea89.
* gnu/system.scm (etc-directory): Add 'locale' and 'timezone'
parameters. Set 'LC_ALL', 'TZ', and 'TZDIR' in /etc/profile.
(operating-system-derivation): Adjust call accordingly.
* gnu/system/vm.scm (%demo-operating-system): Change locale to
'en_US.UTF-8'. Add TZDATA to 'packages'.
* gnu/system.scm (union): Allow (PACKAGE OUTPUT), (PACKAGE), and
PACKAGE.
(<operating-system>)[packages]: Make the default a list of package?
objects.
* gnu/system/vm.scm (%demo-operating-system): Likewise. Add a few
packages.
* gnu/system/shadow.scm (<user-account>)[inputs]: New field.
(passwd-file): Bind the 'shell' field of each account.
* gnu/system/vm.scm (%demo-operating-system): Remove 'shell' field.
* gnu/system/dmd.scm (guix-build-accounts): Store a monadic value in
'shell'. Add 'inputs' field.
* gnu/system.scm (operating-system-derivation): Remove 'shell' field for
'root' account. Add all the 'user-account-inputs' to EXTRAS.
* gnu/system/vm.scm (lower-inputs): Move to monads.scm.
(qemu-image): Don't add GRUB-CONFIGURATION to the INPUTS-TO-COPY.
(union, file-union, etc-directory): Move to gnu/system.scm.
(%demo-operating-system): New variable.
(system-qemu-image): Add 'os' parameter. Rewrite in terms of
'operating-system-derivation'.
* guix/monads.scm (lower-inputs): New procedure.
* gnu/system/grub.scm (grub-configuration-file): Change 'entries' to be
a plain list instead of a list of monadic values.
* gnu/system.scm: New file.
* gnu-system.am (GNU_SYSTEM_MODULES): Add it.
* gnu/system/shadow.scm (guix-build-accounts): Move to...
* gnu/system/dmd.scm (guix-build-accounts): ... here.
(<service>)[user-accounts, user-groups]: New fields.
(guix-service): New #:build-user-id and #:build-accounts parameters.
Use 'guix-build-accounts' and set the 'user-accounts' and
'user-groups' fields accordingly.
* gnu/system/vm.scm (system-qemu-image): Remove use of
'guix-build-accounts'. Augment ACCOUNTS and GROUPS from what SERVICES
demand.
* gnu/system/vm.scm (etc-directory): Remove 'resolv.conf'.
(system-qemu-image): Use 'static-networking-service' with
#:name-servers. Don't populate the image with /etc/resolv.conf.
* gnu/system/dmd.scm (static-networking-service): Add #:name-servers
parameter. Use it to populate /etc/resolv.conf.
* gnu/system/vm.scm (expression->derivation-in-linux-vm)[lower-inputs]:
Move to top-level...
(lower-inputs): ... here. New variable.
(file-union, etc-directory): New procedures.
(system-qemu-image): Use 'etc-directory'; remove redundant code, and
register the result of 'etc-directory' as a GC root.
* gnu/system/dmd.scm (mingetty-service): Add 'stop' field.
(nscd-service): Run with '--foreground'. Change 'stop' to use
'make-kill-destructor'.
(syslog-service): Run with '--no-detach'; change 'stop' similarly.
(guix-service): Likewise for 'stop'.
(static-networking-service): Remove 'sleep' call from 'start'. Change
'stop' to return #f when networking was actually stopped.
* gnu/system/dmd.scm (<service>): Add 'documentation' field.
(host-name-service, mingetty-service, nscd-service, syslog-service,
static-networking-service): Provide a 'documentation' value.
(dmd-configuration-file): Use it.
* gnu/system/dmd.scm (static-networking-service)[start]: Sleep before
running 'route', to leave time for the interface to come up.
[stop]: Run "route del -net default".
* gnu/system/vm.scm (qemu-image): Change the store's mode to #o1775.
Support 'populate' clauses that specify a UID and GID.
(system-qemu-image): Make sure /nix/store has owner 'root' and group
'guixbuild'. Set the right owner for /home/guest. Create
/var/nix/profiles/per-user/{root,guest}.
* gnu/system/shadow.scm (guix-build-accounts): New procedure.
* gnu/system/vm.scm (system-qemu-image): Use it. Add the "guixbuild"
group.
* gnu/system/dmd.scm (guix-service): Add 'builder-group' parameter.
Pass 'guix-daemon' the '--build-users-group' option.
* gnu/system/vm.scm (system-qemu-image): Add a "guest" user and a
"users" user group. Make /home/guest. Add /etc/group. Update
/etc/issue to mention it.
* gnu/system/vm.scm (system-qemu-image): Use
'static-networking-service'. Add /etc/resolv.conf. Add Inetutils to
the profile.
* gnu/system/dmd.scm (static-networking-service): New procedure.
* gnu/system/dmd.scm (host-name-service): New procedure.
(mingetty-service): Require the 'host-name' service.
* gnu/system/vm.scm (system-qemu-image): Add the 'host-name' service.
Set PS1 in /etc/bashrc to something sensible.
* gnu/system/vm.scm (system-qemu-image): Build a 'motd' and an 'issue'
file. Pass 'unix-pam-service' that motd. Have /etc/issue point to
the 'issue' file.
* gnu/system/vm.scm (qemu-image): Add Guix as an input when
INITIALIZE-STORE?.
(union): New procedure.
(system-qemu-image): Use it. Build /etc/profile. Pass PROFILE among
#:inputs-to-copy instead of listing all the individual profiles.
Remove explicit 'build-derivations' call.
* gnu/system/vm.scm (expression->derivation-in-linux-vm)[input-alist]:
Add case for derivation? objects.
Same for #:inputs values.
(qemu-image)[input->name+derivation]: Likewise.
* guix/derivations.scm (derivation->output-path,
derivation->output-paths): New procedures.
(derivation-path->output-path): Use 'derivation->output-path'.
(derivation-path->output-paths): Use 'derivation->output-paths'.
(derivation): Accept 'derivation?' objects as inputs. Return a single
value.
(build-derivations): New procedure.
(compiled-modules): Use 'derivation->output-paths'.
(build-expression->derivation)[source-path]: Add case for when the
input matches 'derivation?'.
[prologue]: Accept 'derivation?' objects in INPUTS.
[mod-dir, go-dir]: Use 'derivation->output-path'.
* guix/download.scm (url-fetch): Adjust to the single-value return.
* guix/packages.scm (package-output): Use 'derivation->output-path'.
* guix/scripts/build.scm (guix-build): When the argument is
'derivation-path?', pass it through 'read-derivation'.
Use 'derivation-file-name' to print out the .drv file names, and to
register them. Use 'derivation->output-path' instead of
'derivation-path->output-path'.
* guix/scripts/package.scm (roll-back): Adjust to the single-value
return.
(guix-package): Use 'derivation->output-path'.
* guix/ui.scm (show-what-to-build): Adjust to deal with 'derivation?'
objects instead of .drv file names.
* gnu/system/grub.scm (grub-configuration-file): Use
'derivation->output-path' instead of 'derivation-path->output-path'.
* gnu/system/vm.scm (qemu-image, system-qemu-image): Likewise.
* tests/builders.scm, tests/derivations.scm, tests/packages.scm,
tests/store.scm, tests/union.scm: Adjust to the new calling
convention.
* doc/guix.texi (Defining Packages, The Store, Derivations): Adjust
accordingly.
* gnu/system/vm.scm (example2): Use 'pam-services->directory'. Change
POPULATE to create /etc/pam.d, /etc/login.defs, and /var/run. Change
BOOT to spawn syslogd; boot to Bash. Add inputs.
* gnu/system/vm.scm (/etc/passwd): Rename to...
(passwd-file): ... this. Add 'shadow?' keyword parameter. Change
format of ACCOUNTS, and fix CONTENTS.
(example2): Adjust accordingly. Create both /etc/shadow and
/etc/passwd, the latter being used by getpwnam(3) & co. when nscd is
not running.
* gnu/packages/grub.scm (<menu-entry>): New record type.
(grub-configuration-file): New procedure.
* gnu/system/vm.scm (qemu-image): Remove parameters 'linux',
'linux-arguments', and 'initrd'. Add 'grub-configuration' parameter.
Honor them, and remove grub.cfg generation code accordingly.
(example2): Use `grub-configuration-file', and adjust accordingly.
* gnu/system/vm.scm (qemu-image): Add 'populate' keyword parameter and
honor it; make it an input.
(/etc/shadow): New procedure.
(example2): Call it; build 'populate' script, and pass it to
'qemu-image'.
* gnu/system/vm.scm (qemu-image): Use (guix build linux-initrd). Remove
'mknod' calls; use 'make-essential-device-nodes' to populate /dev on
the target image.
* gnu/packages/linux-initrd.scm (qemu-initrd): When /root/dev exists,
don't call 'make-essential-device-nodes'.
* gnu/system/vm.scm (qemu-image): Add #:inputs-to-copy and
#:boot-expression parameters. Honor them. Append INPUTS-TO-COPY to
the #:inputs argument for `expression->derivation-in-linux-vm'.
(example2): Add #:boot-expression and #:inputs-to-copy arguments.
* gnu/packages/qemu.scm (qemu-kvm): Remove.
(qemu): Incorporate parts of QEMU-KVM that used to be inherited.
(qemu-kvm/smb-shares): Rename to...
(qemu/smb-shares): ... this.
* gnu/system/vm.scm (expression->derivation-in-linux-vm): Adjust
accordingly.
Ludovic Courtès
Andy Wingo
Christopher Allan Webber
Tobias Geerinckx-Rice
Mark H Weaver
Alex Kost
Leo Famulari
宋文武
David Thompson
David Thompson
Mathieu Lirzin
Andy Wingo