There is no use case where the Guix package is not named 'guix'.
* Makefile.am (GUIX_FOR_BINARY_TARBALL): Remove variable and replace its uses
by 'guix'.
This importer has suffered from bitrot and no longer works with current
Nix and Nixpkgs. See <https://bugs.gnu.org/32339> and
<https://bugs.gnu.org/36255>.
* guix/import/snix.scm, guix/scripts/import/nix.scm,
tests/snix.scm: Remove.
* Makefile.am (MODULES, SCM_TESTS): Remove them.
* guix/scripts/import.scm (importers): Remove "nix".
* build-aux/test-env.in: Remove NIXPKGS variable.
* configure.ac: Remove '--with-nixpkgs' option.
* doc/guix.texi (Invoking guix import): Remove bit about "guix import
nix".
* etc/completion/fish/guix.fish: Likewise.
These older system actions are deprecated and cause warnings to be emitted.
* Makefile.am (release) <guix system disk-image>
<guix system vm-image>: Replace by...
<guix system image>: ... this. Specify the type of the VM image as qcow2.
Otherwise 'make dist' would fail with the message: "No rule to make target
'po/doc/guix-manual.pot', needed by 'distdir-am'. Stop.".
* Makefile.am (dist) <doc-po-update>: Add prerequisite.
(dist-hook) <doc-po-update>: Remove prerequisite.
This importer has suffered from bitrot and no longer works with current
Nix and Nixpkgs. See <https://bugs.gnu.org/32339> and
<https://bugs.gnu.org/36255>.
* guix/import/snix.scm, guix/scripts/import/nix.scm,
tests/snix.scm: Remove.
* Makefile.am (MODULES, SCM_TESTS): Remove them.
* guix/scripts/import.scm (importers): Remove "nix".
* build-aux/test-env.in: Remove NIXPKGS variable.
* configure.ac: Remove '--with-nixpkgs' option.
* doc/guix.texi (Invoking guix import): Remove bit about "guix import
nix".
* etc/completion/fish/guix.fish: Likewise.
This module allows for communicating with the IPFS
gateway over the HTTP interface. The commit has been
cherry-picked from <https://issues.guix.gnu.org/33899>.
The procedures for adding and restoring file trees have
been removed as according to a reply issue 33899, a different
format will be used. The procedure 'add-data' has been
exported as it will be used in the system test for IPFS.
* guix/ipfs.scm: New file.
* Makefile.am (MODULES): Add it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This makes powerpc64le-linux a supported architecture for Guix, but not for
Guix System.
* Makefile.am (SUPPORTED_SYSTEMS): Add an entry for powerpc64le-linux.
* etc/guix-install.sh (chk_sys_arch): Same.
* guix/packages.scm (%supported-systems): Same.
* m4/guix.m4 (GUIX_ASSERT_SUPPORTED_SYSTEM): Same.
* tests/guix-build.sh (all_systems): Same.
This removes hydra support to use Cuirass as the only continuous integration
system.
* build-aux/hydra/gnu-system.scm: Remove it.
* build-aux/hydra/guix-modular.scm: Ditto.
* build-aux/hydra/guix.scm: Ditto.
* build-aux/cuirass/hydra-to-cuirass.scm: Ditto.
* Makefile.am (EXTRA_DIST): Update it.
(hydra-jobs.scm): Remove it.
(cuirass-jobs.scm): Update it.
* build-aux/hydra/evaluate.scm: Move it to ...
* build-aux/cuirass/evaluate.scm: ... here.
* build-aux/cuirass/guix-modular.scm: Remove it.
* build-aux/cuirass/gnu-system.scm: Ditto.
* guix/packages.scm (%hydra-supported-systems): Rename it to ...
(%cuirass-supported-systems): ... this variable.
* build-aux/check-final-inputs-self-contained: Adapt it.
* etc/release-manifest.scm: Ditto.
* gnu/ci.scm (package->alist): Remove it.
(derivation->job): New procedure.
(package-job, package-cross-job, cross-jobs, image-jobs, system-test-jobs,
tarball-jobs): Use it.
(guix-jobs): New procedure.
(hydra-jobs): Rename it to ...
(cuirass-jobs): ... this procedure.
This removes hydra support to use Cuirass as the only continuous integration
system.
* build-aux/hydra/gnu-system.scm: Remove it.
* build-aux/hydra/guix-modular.scm: Ditto.
* build-aux/hydra/guix.scm: Ditto.
* build-aux/cuirass/hydra-to-cuirass.scm: Ditto.
* Makefile.am (EXTRA_DIST): Update it.
(hydra-jobs.scm): Remove it.
(cuirass-jobs.scm): Update it.
* build-aux/hydra/evaluate.scm: Move it to ...
* build-aux/cuirass/evaluate.scm: ... here.
* build-aux/cuirass/guix-modular.scm: Remove it.
* build-aux/cuirass/gnu-system.scm: Ditto.
* guix/packages.scm (%hydra-supported-systems): Rename it to ...
(%cuirass-supported-systems): ... this variable.
* build-aux/check-final-inputs-self-contained: Adapt it.
* etc/release-manifest.scm: Ditto.
* gnu/ci.scm (package->alist): Remove it.
(derivation->job): New procedure.
(package-job, package-cross-job, cross-jobs, image-jobs, system-test-jobs,
tarball-jobs): Use it.
(guix-jobs): New procedure.
(hydra-jobs): Rename it to ...
(cuirass-jobs): ... this procedure.
This means there's a module for working with substitutes, rather than all the
code sitting in the script. The need for this can be seen with the weather and
challenge scripts, that now don't have to use code from the substitute script,
but can instead use the substitute module.
The separation here between the actual functionality of the substitute script
and the underlying functionality used both there and elsewhere should make
maintenance easier moving forward.
This commit just moves code, none of the code should have been changed
significantly.
* guix/scripts/substitute.scm (%narinfo-cache-directory, %narinfo-ttl,
%narinfo-negative-ttl, %narinfo-transient-error-ttl, %unreachable-hosts): Move
variables to guix/substitutes.scm.
(narinfo-cache-file, cached-narinfo, cache-narinfo!, narinfo-request,
read-to-eof, call-with-connection-error-handling, fetch-narinfos,
lookup-narinfos, lookup-narinfos/diverse): Move procedures to
guix/substitutes.scm.
* guix/substitutes.scm: New file.
* Makefile.am: Add it.
* guix/narinfo.scm: Remove redundant module.
* guix/scripts/challenge.scm: Change (guix scripts substitute) to (guix
substitutes).
* guix/scripts/weather.scm: Change (guix scripts substitute) to (guix
substitutes).
This is a followup to commit 8727870ff4.
* gnu/packages/aux-files/linux-libre/5.9-arm.conf,
gnu/packages/aux-files/linux-libre/5.9-arm64.conf,
gnu/packages/aux-files/linux-libre/5.9-i686.conf,
gnu/packages/aux-files/linux-libre/5.9-x86_64.conf: Delete files.
* Makefile.am (AUX_FILES): Remove them.
Add a new phase validating the usability of installed Python packages.
* gnu/packages/aux-files/python/sanity-check.py: New file.
* Makefile.am (AUX_FILES): Register it.
* guix/build-system/python.scm (sanity-check.py): New variable.
(lower): Add the script as an implicit input.
* guix/build/python-build-system.scm: Remove trailing #t.
(sanity-check): New phase.
(%standard-phases): Use it.
* tests/builders.scm: (make-python-dummy)
(dummy-ok, dummy-dummy-nosetuptools, dummy-fail-requirements)
(dummy-fail-import, dummy-fail-console-script): New variables.
("python-build-system: dummy-ok")
("python-build-system: dummy-dummy-nosetuptools")
("python-build-system: dummy-fail-requirements")
("python-build-system: dummy-fail-import")
("python-build-system: dummy-fail-console-script"): Add tests.
Using PYTHONPATH as a mean to discover the Python packages had the following
issues:
1. It is not versioned, so different versions of Python would clash if
installed in a shared profile.
2. It would interfere with the host Python site on foreign
distributions, sometimes preventing a a user to login their GDM
session (!).
3. It would take precedence over user installed Python packages
installed through pip.
4. It would leak into Python virtualenvs, which are supposed to create
isolated Python environments.
This changes fixes the above issues by making use of a sitecustomize.py
module. The newly introduced GUIX_PYTHONPATH environment variable is read
from the environment, filtered for the current Python version of the
interpreter, and spliced in 'sys.path' just before Python's own site location,
which provides the expected behavior.
* gnu/packages/aux-files/python/sitecustomize.py: New file.
* Makefile.am: Register it.
* gnu/packages/python.scm (customize-site)
(guix-pythonpath-search-path): New procedures.
(python-2.7)[phases]{install-sitecustomize.py}: New phase.
[native-inputs]{sitecustomize.py}: New input.
[native-search-paths]: Replace PYTHONPATH with GUIX_PYTHONPATH.
(python-3.9)[native-search-paths]: Likewise.
[phases]{install-sitecustomize}: Override with correct version.
[native-search-paths]: Replace PYTHONPATH with GUIX_PYTHONPATH.
* gnu/packages/commencement.scm (python-boot0):
[phases]{install-sitecustomize}: Likewise.
[native-inputs]{sitecustomize.py}: New input.
[native-search-paths]: Replace PYTHONPATH with GUIX_PYTHONPATH.
* guix/build/python-build-system.scm (site-packages): Do not add a trailing
'/'.
squash! gnu: python: Replace PYTHONPATH by GUIX_PYTHONPATH.
* Makefile.am (make-check-po-rule): New definition.
Add top-level 'eval' and calls to 'make-check-po-rule' to generate
'check-po.DOMAIN' rules.
(check-po): New rule.
This separation between the code for dealing with narinfos from the code doing
that for a purpose should make things clearer, and better support components
other that the substitute script in using this code.
This is just moving the code around, no code should have been significantly
changed.
* guix/scripts/substitute.scm (<narinfo>): Move record type to (guix narinfo).
(fields->alist, narinfo-hash-algorithm+value, narinfo-hash->sha256,
narinfo-signature->canonical-sexp, narinfo-maker, read-narinfo,
narinfo-sha256, valid-narinfo?, write-narinfo, narinfo->string,
string->narinfo, equivalent-narinfo?, supported-compression?,
compresses-better?, narinfo-best-uri): Move procedures to (guix narinfo).
(%compression-methods): Move variable to (guix narinfo).
* guix/narinfo.scm: New file.
* Makefile.am (MODULES): Add it.
* po/guix/POTFILES.in: Add 'guix/narinfo.scm'.
* gnu/packages/vim.scm (vim)[arguments]: Add new 'install-guix.vim phase
to install vendor specific vimrc.
* gnu/packages/aux-files/guix.vim: New file.
* Makefile.am (AUX_FILES): Register it.
Fixes <https://bugs.gnu.org/44649>.
Reported by Daniel Brooks <db48x@db48x.net>.
This is a followup to 6799e6e578, which
rightfully removed the '.cil' file from the distribution, but wrongfully
installed the '.cil.in' file instead of the '.cil' file.
* Makefile.am (nodist_selinux_policy_DATA): Remove ".in".
Following discussions in <https://issues.guix.gnu.org/43893>, keeping a copy
of the updated package source is desirable when generating a release.
* build-aux/update-guix-package.scm (version-controlled?): Remove variable.
(call-with-temporary-git-worktree): Renamed from
'with-temporary-git-worktree'. Update doc. Do not change directory
implicitly. Define as a procedure, not a syntax.
(keep-source-in-store): New procedure.
(main): Adjust to use with call-with-temporary-git-worktree. Add the sources
to the store when GUIX_ALLOW_ME_TO_USE_PRIVATE_COMMIT is set. Exit gracefully
when FIND-ORIGIN-REMOTE returns #f.
(%savannah-guix-git-repo-push-url-regexp): Adjust match for a potential colon
separator.
* Makefile.am (GUIX_ALLOW_ME_TO_USE_PRIVATE_COMMIT): Adjust.
* .dir-locals.el (scheme-mode): Remove entry for with-temporary-git-worktree.
* doc/contributing.texi (Updating the Guix Package): Update doc.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
* Makefile.am (GUIX_GIT_KEYRING): New variable.
(authenticate): Use GUIX_GIT_KEYRING to select the keyring branch
reference.
* doc/contributing.texi (Building from Git): Add an example about the
use of GUIX_GIT_KEYRING.
This gets rid of:
guile: warning: failed to install locale
when running the 'guix' command on a foreign distro where 'GUIX_LOCPATH'
isn't set.
* Makefile.am (pkglibexec_PROGRAMS, guile_SOURCES, guile_LDADD)
(guile_CFLAGS): New variables.
(install-exec-hook): New target.
(AUX_FILES): Remove 'guile-launcher.c'.
* configure.ac: Use 'GUILE_FLAGS'.
Since commit ba48895899, selected UTF-8
locales are bundled. However, because 'guix-command' is itself a Guile
script, users would still see Guile's warning, particularly on foreign
distros:
$ LC_ALL=sdf guix foo
guile: warning: failed to install locale
hint: Consider installing the `glibc-utf8-locales' [...]
User commands would print that warning, but more importantly, each
invocation of 'guix substitute' would print it, even though
'guix-daemon.service' explicitly chooses "en_US.utf8", which is in
'glibc-utf8-locales'. This leads to confusion since users would keep
seeing this message unless/until they realize they also need to install
'glibc-utf8-locales' in root's profile.
This patch gets rid of "guile: warning: ..." for a guix-pulled 'guix'
command.
* guix/self.scm (specification->package): Add "gcc-toolchain".
(quiet-guile): New procedure.
(guix-command): Use it.
* gnu/packages/aux-files/guile-launcher.c: New file.
* Makefile.am (AUX_FILES): Add it.
* guix/scripts/system.scm (list-image-types): New procedure,
(%options): add "image-type" and "list-image-types" options, remove
"file-system-type" option,
(show-help): adapt accordingly,
(%default-options): also adapt, and set the default "image-type" to "raw",
(perform-action): add image-type argument and remove file-system-type argument,
(process-action): adapt perform-action call,
(system-derivation-for-action): remove base-image
argument, add image-type argument, and use it to create the image passed to
"system-image".
* tests/guix-system.sh: Adapt accordingly and add a test for
"--list-image-types" command.
* doc/guix.texi (Building the Installation Image,
Invoking guix system): Adapt accordingly.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
* guix/scripts/offload.scm (<build-machine>)[systems]: New field.
[system]: Accessor changed to %build-machine-system. Default to #f.
* guix/scripts/offload.scm (build-machine-system): Wrap %build-machine-system
with a deprecation warning.
(build-machine-systems): Access the new systems field or fallback to use
build-machine-system, for backward compatibility.
(machine-matches?): Adjust.
* tests/offload.scm: Add tests...
* Makefile.am (SCM_TESTS): ...and register them.
* doc/guix.texi (Daemon Offload Setup): Update doc.
* Makefile.am (MODULES): Remove guix/zlib.scm and guix/lzlib.scm,
(SCM_TESTS): remove tests/zlib.scm, tests/lzlib.scm.
* build-aux/build-self.scm (make-config.scm): Remove unused %libz variable.
* configure.ac: Remove LIBZ and LIBLZ variables and check instead for
Guile-zlib and Guile-lzlib.
* doc/guix.texi ("Requirements"): Remove zlib requirement and add Guile-zlib
and Guile-lzlib instead.
* gnu/packages/package-management.scm (guix)[native-inputs]: Add "guile-zlib"
and "guile-lzlib",
[inputs]: remove "zlib" and "lzlib",
[propagated-inputs]: ditto,
[arguments]: add "guile-zlib" and "guile-lzlib" to Guile load path.
* guix/config.scm.in (%libz, %liblz): Remove them.
* guix/lzlib.scm: Remove it.
* guix/man-db.scm: Use (zlib) instead of (guix zlib).
* guix/profiles.scm (manual-database): Do not stub (guix config) in imported
modules list, instead add "guile-zlib" to the extension list.
* guix/scripts/publish.scm: Use (zlib) instead of (guix zlib) and (lzlib)
instead of (guix lzlib),
(string->compression-type, effective-compression): do not check for zlib and
lzlib availability.
* guix/scripts/substitute.scm (%compression-methods): Do not check for lzlib
availability.
* guix/self.scm (specification->package): Add "guile-zlib" and "guile-lzlib"
and remove "zlib" and "lzlib",
(compiled-guix): remove "zlib" and "lzlib" arguments and add guile-zlib and
guile-lzlib to the dependencies, also do not pass "zlib" and "lzlib" to
"make-config.scm" procedure,
(make-config.scm): remove "zlib" and "lzlib" arguments as well as %libz and
%liblz variables.
* guix/utils.scm (lzip-port): Use (lzlib) instead of (guix lzlib) and do not
check for lzlib availability.
* guix/zlib.scm: Remove it.
* m4/guix.m4 (GUIX_LIBZ_LIBDIR, GUIX_LIBLZ_FILE_NAME): Remove them.
* tests/lzlib.scm: Use (zlib) instead of (guix zlib) and (lzlib)
instead of (guix lzlib), and do not check for zlib and lzlib availability.
* tests/publish.scm: Ditto.
* tests/substitute.scm: Do not check for lzlib availability.
* tests/utils.scm: Ditto.
* tests/zlib.scm: Remove it.
* guix/build/maven/java.scm: New file.
* guix/build/maven/plugin.scm: New file.
* guix/build/maven/pom.scm: New file.
* Makefile.am (MODULES): Add them.
* guix/build-system/ant.scm (%ant-build-system-modules): Add them to the
build side.
* guix/build/java-utils.scm (generate-plugin.xml, install-pom-file)
(install-from-pom): New procedures.
* Makefile.am (channel_intro_commit, channel_intro_signer): New
variables.
(authenticate): Use it.
(EXTRA_DIST): Remove 'build-aux/git-authenticate.scm'.
* build-aux/git-authenticate.scm: Remove.
* gnu/system/hurd.scm (%hurd-def%hurd-default-operating-system-kernel,
%hurd-default-operating-system): New exported variables.
* gnu/system/examples/bare-hurd.tmpl: New file.
* Makefile.am (EXAMPLES): Add it.
* tests/guix-system.sh: Add --target=i586-pc-gnu when testing it.
* gnu/packages/aux-files/run-in-namespace.c (HAVE_EXEC_WITH_LOADER): New
macro.
(bind_mount): Rename to...
(mirror_directory): ... this. Add 'firmlink' argument and use it
instead of calling mkdir/open/close/mount directly.
(bind_mount, make_symlink): New functions.
(exec_in_user_namespace): Adjust accordingly.
(exec_with_loader) [HAVE_EXEC_WITH_LOADER]: New function.
(exec_performance): New function.
(engines): Add them.
* guix/scripts/pack.scm (wrapped-package)[fakechroot-library]
[audit-module]: New procedures.
[audit-source]: New variable.
[build](elf-interpreter, elf-loader-compile-flags): New procedures.
(build-wrapper): Use them.
* tests/guix-pack-relocatable.sh: Test with
'GUIX_EXECUTION_ENGINE=fakechroot'.
* doc/guix.texi (Invoking guix pack): Document the 'performance' and
'fakechroot' engines.
* gnu/packages/aux-files/pack-audit.c: New file.
* Makefile.am (AUX_FILES): Add it.
This fixes a bug introduced in 362bcdb1b0
whereby the VM image would no longer contain /etc/config.scm, contrary
to what the manual says.
Reported by dbdude on #guix.
* Makefile.am (release): Pass '--save-provenance' to 'guix system
vm-image'.
* doc/guix.texi (Running Guix in a VM): Adjust file name accordingly.
Reported by Vagrant Cascadian <vagrant@debian.org>.
* Makefile.am (dist-with-updated-version): New target.
(release): Depend on 'dist-with-updated-version'.
The manifest can be passed to 'guix build -m', 'guix weather -m', and so
on. It can also be passed to an installed 'guix' (without
./pre-inst-env), with the exception so far of installation tests.
* build-aux/run-system-tests.scm: Remove. Move interesting bits move
to...
* etc/system-tests.scm: ... here. New file.
* Makefile.am (EXTRA_DIST): Remove 'build-aux/run-system-tests.scm' and
add 'etc/system-tests.scm'.
(check-system): Rewrite to run 'guix build -m etc/system-tests.scm'.
* gnu/services/linux.scm: New file.
* tests/services/linux.scm: Add test.
* Makefile.am (SCM_TESTS): Register test.
* doc/guix.texi (Linux Services): Add a new section and document the new
service and its configuration.
This is a followup to commit 4845dee706.
* gnu/packages/aux-files/linux-libre/5.2-arm-veyron.conf,
gnu/packages/aux-files/linux-libre/5.2-arm.conf,
gnu/packages/aux-files/linux-libre/5.2-arm64.conf,
gnu/packages/aux-files/linux-libre/5.2-i686.conf,
gnu/packages/aux-files/linux-libre/5.2-x86_64.conf: Delete files.
* Makefile.am (AUX_FILES): Remove them.
* guix/scripts/time-machine.scm: New file.
* Makefile.am: (MODULES): Add it.
* guix/scripts/pull.scm (channel-list): Export.
* guix/inferior.scm (cached-channel-instance): New procedure.
(inferior-for-channels): Use it.
* doc/guix.texi (Invoking guix time-machine): New section.
(Channels): Cross-reference it.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
The XML feed was discontinued on Oct. 16th, 2019:
<https://nvd.nist.gov/General/News/XML-Vulnerability-Feed-Retirement-Phase-3>
* guix/cve.scm (string->date*): New procedure.
(<cve-item>, <cve>, <cve-reference>): New record types.
(cpe-match->cve-configuration, configuration-data->cve-configurations)
(json->cve-items, version-matches?): New procedures.
(yearly-feed-uri): Change URL to refer to JSON feed.
(cpe->product-alist, %parse-vulnerability-feed)
(xml->vulnerabilities): Remove.
(cve-configuration->package-list, merge-package-lists)
(cve-item->vulnerability, json->vulnerabilities): New procedures.
(write-cache): Use 'json->vulnerabilities' instead of
'xml->vulnerabilities', and remove 'parameterize'.
(vulnerabilities->lookup-proc): Use 'version-matches?' when VERSION is
true.
* tests/cve.scm (%sample): Use 'tests/cve-sample.json'.
(%expected-vulnerabilities): Rewrite accordingly.
("json->cve-items", "cve-item-published-date")
("json->vulnerabilities"): New tests.
("xml->vulnerabilities"): Remove.
("vulnerabilities->lookup-proc"): Adjust to new vulnerabilities.
* tests/cve-sample.json: New file.
* tests/cve-sample.xml: Remove.
* Makefile.am (EXTRA_DIST): Adjust accordingly.
* doc/guix.texi (Invoking guix lint): Update nist.gov URLs.
* guix/scripts/show.scm: New file.
* Makefile.am (MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* tests/guix-package-aliases.sh: Add test.
* doc/guix.texi (Invoking guix package): Document it and use it in a example.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
* .gitignore: Update ignore list.
* Makefile.am (assert-no-store-file-names): Exclude the cookbook.
* bootstrap: Generate po files for cookbook translations.
* doc/guix-cookbook.texi: New file.
* doc/local.mk (info_TEXINFOS): Add it; add a rule to build cookbook
translations.
* po/doc/local.mk (DOC_COOKBOOK_PO_FILES): New variable.
(EXTRA_DIST): Add cookbook pot file and po files.
(doc-po-update-cookbook-%): New target.
(doc-pot-update): Also update cookbook pot file.
(doc-po-update): Also update cookbook po files.
As it was done for (guix import gnome).
* guix/import/kde.scm: New file.
* Makefile.am (MODULES): Add it.
* guix/gnu-maintenance.scm (%kde-updater) (%kde-file-list-uri)
(download.kde.org-files) (latest-kde-release): Remove.
Reported by Vagrant Cascadian <vagrant@debian.org>.
* Makefile.am (assert-no-store-file-names): Exclude
"binutils-boot-2.20.1a.patch" since it contains a store file name as a
comment.
* gnu/packages/commencement.scm (glibc-mesboot0): Use an ellipsis
instead of an actual store file name in comment.
* gnu/services/networking.scm (ntp-server-types): New enum.
(<ntp-server>): New record type.
(ntp-server->string): New procedure.
(%ntp-servers): Define in terms of <htp-server> records. Use the first
entrypoint server as a pool instead of a list of static servers. This is more
resilient since a new server of the pool can be interrogated on every
request. Add the 'iburst' options.
(ntp-configuration-servers): Define a custom accessor that warns but honors
the now deprecated server format.
(<ntp-configuration>): Use it.
(%openntpd-servers): New variable,
(<openntpd-configuration>): Use it, as a pool ('servers' field) instead of a
regular server.
* tests/networking.scm: New file.
* Makefile.am (SCM_TESTS): Register it.
* doc/guix.texi: Update documentation.
* Makefile.am (make-download-po-rule): New definition.
Add top-level 'eval' and calls to 'make-download-po-rule' to generate
'download-po.DOMAIN' rules.
(download-po): New rule.
The effect of this change was to import the (json parser) from the host
side into the build side. The solution here would be to do the equivalent
of ‘with-extensions’ for gexps. Since we don't use gexps for build
systems just yet, revert this for now.
This reverts commit 8eb0ba532e.
* guix/build/node-build-system.scm: New file.
* guix/build-system/node.scm: New file.
* guix/build/json.scm: New file.
* doc/guix.texi: Document it.
* Makefile.am: Added new files.
Co-Authored-By: Julien Lepiller <julien@lepiller.eu>
This reverts commit dfd248648f,
which effectively disabled 'ChangeLog' generation.
* Makefile.am (dist-hook): Depend on 'gen-ChangeLog', not
'$(distdir)/ChangeLog'.
(gen-ChangeLog): Remove dependency. Use "ChangeLog.tmp" as the
temporary file name.
(assert-no-store-file-names): Remove dependency. Exclude ChangeLog*.
* guix/scripts/search.scm: New file.
* Makefile.am (MODULES): Add it.
* po/guix/POTFILES.in: Add it.
* tests/guix-package-aliases.sh: Add test.
* doc/guix.texi (Invoking guix package): Document it and use it in a
couple of examples.
* guix/self.scm (info-manual): Run po4a and related commands to generate
translated texi files before building translated manuals.
* guix/build/po.scm: New file.
* Makefile.am (MODULES_NOT_COMPILED): Add it.
Until now, the 'guix' package shipped in binary tarballs and system
images would be built sequentially for each system type, one at a time.
Now all of them can potentially be built in parallel.
* Makefile.am (system_flags): New function.
(release): Run "guix build guix" before "make binary-tarballs" and
before "guix system disk-image" to build all the 'guix' packages in
parallel.
Fixes installation of ungoogled-chromium on foreign distros.
This is a followup to commit f1e9de4d3a.
* Makefile.am (AUX_FILES): Add missing
gnu/packages/aux-files/chromium/master-preferences.json entry.
Signed-off-by: Leo Famulari <leo@famulari.name>
* guix/channels.scm (<channel-metadata>): New record.
(read-channel-metadata, channel-instance-dependencies): New procedures.
(latest-channel-instances): Include channel dependencies; add optional
argument PREVIOUS-CHANNELS.
(channel-instance-derivations): Build derivation for additional channels and
add it as dependency to the channel instance derivation.
* doc/guix.texi (Channels): Add subsection "Declaring Channel Dependencies".
* tests/channels.scm: New file.
* Makefile.am (SCM_TESTS): Add it.
* guix/channels.scm: New file.
* Makefile.am (MODULES): Add it.
* guix/scripts/pull.scm: Use it.
(%default-options): Remove 'repository-url' and 'ref'.
(show-help, %options): Add '--channels'.
(%self-build-file, %pull-version, build-from-source)
(whole-package-for-legacy, derivation->manifest-entry): Remove. These
now exist in a similar form in (guix channels).
(build-and-install): Change 'source' to 'instances'. Remove #:url,
#:branch, and #:commit. Rewrite using 'channel-instances->manifest'.
(channel-list): New procedure.
(guix-pull): Parameterize %REPOSITORY-CACHE-DIRECTORY. Call
'honor-lets-encrypt-certificates!' unconditionally. Load
~/.config/guix/channels.scm. Rewrite to use (guix channels).
[use-le-certs?]: Remove.
* po/guix/POTFILES.in: Add (guix channels).
* doc/guix.texi (Invoking guix pull): Group the description of '--url',
'--commit', and '--branch'. Remove mention of 'GUIX_PULL_URL'. Add
references to "Channels". Document '--channels'.
(Channels): New node.
(Defining Packages): Link to "Channels" instead of "Package Modules".
(Invoking guix edit): Link to "Package Modules" instead of "Defining
Packages".
(Package Modules): Document both GUIX_PACKAGE_PATH and channels.
Fixes <https://bugs.gnu.org/19973>.
Reported by Mark H Weaver <mhw@netris.org>.
* guix/build/debug-link.scm: New file.
* guix/build/graft.scm (%graft-hooks): New variable.
(graft): Add #:hooks and honor it.
* guix/grafts.scm (graft-derivation/shallow): Add (guix build
debug-link) and (guix elf) to #:modules.
* tests/debug-link.scm: New file.
* Makefile.am (MODULES): Add guix/build/debug-link.scm.
(SCM_TESTS): Add tests/debug-link.scm.
Maxim Cournoyer
Ludovic Courtès
Efraim Flashner
Chris Marusich
Mathieu Othacehe
Katherine Cox-Buday
Christopher Baines
Leo Famulari
Simon South
Danny Milosavljevic
Leo Prikler
Lars-Dominik Braun
Julien Lepiller
raingloom
Miguel Ángel Arruga Vivas
Jan (janneke) Nieuwenhuizen
Mathieu Othacehe
Konrad Hinsen
Ludovic Courtès
nikita
Marius Bakke
Vagrant Cascadian
Pierre Neidhardt
Timothy Sample
Mark H Weaver
Hartmut Goebel
Ricardo Wurmus
Tobias Geerinckx-Rice
zimoun
nixo
Jakob L. Kreuze
Robert Vollmert
Jelle Licht
Arun Isaac
ng0
Ivan Petkov
Jonathan Brielmaier
Eric Bavier
Alex Vong